egloskerry
Hazard to Self
Posts: 63
Registered: 7-2-2007
Member Is Offline
Mood: No Mood
|
|
Removing KMnO4 stains
As anyone who has worked with KMnO4 knows, it causes brown stains that are impossible to remove from surfaces or skin without a harsh abrasive. I
remember reading somewhere that sodium bisulfate will remove the stains. Is this true? Does anyone know of anything that will remove them? I've tried
3% H2O2, 91% isopropyl, ethanol, and gojo. Nothing works on my hands or the floor.
[Edited on 14-4-2007 by egloskerry]
|
|
|
Ozone
International Hazard
Posts: 1269
Registered: 28-7-2005
Location: Good Olde USA
Member Is Offline
Mood: Integrated
|
|
Hello,
The brown stuff is manganese dioxide, MnO2.
Please check out the search function for things like:
http://www.sciencemadness.org/talk/viewthread.php?tid=7375&a...
Since it is not mentioned there, I will say that oxidative treatment, save HNO3 (conc.), will get you no where. Reductive agents such as sodium
metabisulfite or hydroxylamine will get the job done (under mild conditions, instantly).
Cheers,
O3
-Anyone who never made a mistake never tried anything new.
--Albert Einstein
|
|
|
egloskerry
Hazard to Self
Posts: 63
Registered: 7-2-2007
Member Is Offline
Mood: No Mood
|
|
So I bought this bisulfate for nothing? I must've been thinking of bisulfite.
[Edited on 14-4-2007 by egloskerry]
|
|
|
joeflsts
Hazard to Others
Posts: 226
Registered: 14-1-2006
Member Is Offline
Mood: No Mood
|
|
| Quote: | Originally posted by egloskerry
So I bought this bisulfate for nothing? I must've been thinking of bisulfite.
[Edited on 14-4-2007 by egloskerry] |
Depends. If you are into Halogens and experimenting with Chlorine - the bisulfate is one way there.
Joe
|
|
|
pantone159
National Hazard
Posts: 586
Registered: 27-6-2006
Location: Austin, TX, USA
Member Is Offline
Mood: desperate for shade
|
|
But for removing the MnO2, you want bisulfite. In fact, metabisulfite is normally the preferred version of this (cheaper, purer, more stable). It is
cheap. I can find it at the local brewing supply store.
|
|
|
unionised
International Hazard
Posts: 5102
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
Lemon juice works too. It smells better than bisulphite and it's easy to get hold of.
|
|
|
garage chemist
chemical wizard
Posts: 1803
Registered: 16-8-2004
Location: Germany
Member Is Offline
Mood: No Mood
|
|
Ascorbic acid works too, and is probably the most skin-friendly.
[Edited on 15-4-2007 by garage chemist]
|
|
|
Darkblade48
Hazard to Others
Posts: 411
Registered: 27-3-2005
Location: Canada
Member Is Offline
Mood: No Mood
|
|
I'm pretty sure oxalic acid works as well (unfortunately, not as skin friendly as ascorbic)
|
|
|
guy
National Hazard
Posts: 982
Registered: 14-4-2004
Location: California, USA
Member Is Offline
Mood: Catalytic!
|
|
Orange juice works. Any acid that is reducing.
Or use Hydrogen peroxide mixed with vinegar (works fastest).
|
|
|
woelen
Super Administrator
Posts: 7976
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
I have best experience with a solution of sodium (bi)sulfite in dilute HCl (3% or so). Such a solution is not really corrosive and does not involve
toxic stuff. Of course you should not let it act upon skin for a long time, but the few seconds of exposure, needed for cleaning up are not a problem
at all.
This solution also is great for cleaning KMnO4-stains from glassware, ceramics and also from tables, workbenches etc. Do not apply it to
clothes/fabric, because of its bleaching action.
|
|
|
dedalus
Hazard to Self
Posts: 60
Registered: 13-4-2007
Location: New York
Member Is Offline
Mood: No Mood
|
|
I always use HCl. You need good ventilation because chlorine is released.
|
|
|
unionised
International Hazard
Posts: 5102
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
Hmm?
"I have best experience with a solution of sodium (bi)sulfite in dilute HCl (3% or so). Such a solution is not really corrosive and does not involve
toxic stuff. "
OK, you put that in your gin and tonnic and I will put lemmon in mine.....
|
|
|
woelen
Super Administrator
Posts: 7976
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
Do you really think HCl 3% and sulfite are toxic? Of course you should not eat or drink them, but for the rest these are rather benign. Also because
of the low concentration of the acid and the small amount of sulfite needed, the level of SO2-formation also is very low. You can smell it, but it's
not irritating. The reason I like this mix is its instant action on permanganate and MnO2 stains, and it also can be applied on skin.
My other favorite stain remover is a warm mix of concentrated H2SO4 and solid NaF. It also works really good in removing KMnO4 stains, making a
beautiful green solution of MnO3F. However, this solution is somewhat more toxic than 3% HCl + a pinch of sulfite  .
[Edited on 16-4-07 by woelen]
|
|
|
dedalus
Hazard to Self
Posts: 60
Registered: 13-4-2007
Location: New York
Member Is Offline
Mood: No Mood
|
|
It depends a lot on how sensitive you are to SO2. I once worked with a guy who'd break out in hives from sodium metabisulfite. And, some asthmatics
are liable to have an attack triggered by them. Sulfuites, I mean.
I just don't like the smell.
|
|
|
egloskerry
Hazard to Self
Posts: 63
Registered: 7-2-2007
Member Is Offline
Mood: No Mood
|
|
Well, I had a large stain, and tried a highly concentrated solution of sodium bisulfate heated to boiling with a propane torch. Worked pretty well.
|
|
|
Pyridinium
Hazard to Others
Posts: 258
Registered: 18-5-2005
Location: USA
Member Is Offline
Mood: cupric
|
|
| Quote: | Originally posted by woelen
My other favorite stain remover is a warm mix of concentrated H2SO4 and solid NaF.
[Edited on 16-4-07 by woelen] |
True, I suppose when you're dead, stains are no longer a major concern 
Never tried the MnO3F formation. It does sound interesting. I'm fascinated with complex ions.
|
|
|
woelen
Super Administrator
Posts: 7976
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
Well, I actually did the experiment. I still need to update the webpage, where I say this is probably MnO3F. I have a newer text book, which confirms
the formation of MnO3F.
http://woelen.scheikunde.net/science/chem/exps/KMnO4+NaF+H2S...
|
|
|
DerAlte
National Hazard
Posts: 779
Registered: 14-5-2007
Location: Erehwon
Member Is Offline
Mood: Disgusted
|
|
For skin, if newly stained, 3% H2O2 - or a light scouring pad will do it. Stain is surface only, due to (probably) unsaturated skin oils.
DerAlte
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
