Difference between revisions of "Joint sleeve"

From Sciencemadness Wiki
Jump to: navigation, search
Line 1: Line 1:
 
{{Stub}}
 
{{Stub}}
A '''joint sleeve''' is a [[Polytetrafluoroethylene|PTFE]] sleeve used to seal ground glass joints in processes where the reagents can attack [[silicone grease]].
+
[[File:PTFE joint sleeves.jpg|thumb|350px|PTFE joint sleeves for 14/23, 19/26 and 29/32 joints]]
 +
A '''joint sleeve''' is a [[Polytetrafluoroethylene|PTFE]] sleeve used to seal ground glass joints in processes where the reagents can attack [[silicone grease]], such as distillation of [[nitric acid]].
  
 
==General==
 
==General==

Revision as of 14:19, 5 May 2019

PTFE joint sleeves for 14/23, 19/26 and 29/32 joints

A joint sleeve is a PTFE sleeve used to seal ground glass joints in processes where the reagents can attack silicone grease, such as distillation of nitric acid.

General

PTFE joint sleeves are hollow conical frustum-shaped sheets of PTFE, which come in two versions: rigid and flexible. The rigid sleeve is thick, while the flexible one is thinner and can be deformed by hand. While the thinner ones are often preferred, they are also easier to damage. PTFE joint sleeves can handle temperatures up to 280 °C.

Availability

PTFE joint sleeves can be purchased from lab suppliers, though they are a bit pricey.

DIY joint sleeve

You can make your own joint sleeves by carefully cutting a Teflon sheet in the form of a cone frustum projection, then carefully attach it to the male ground glass joint, before carefully placing it in the female ground glass joint. If your PTFE sheet gets wrinkled, it may not seal properly.

Projects

See also

References

Relevant Sciencemadness threads