Difference between revisions of "Tetrachlorocupric acid"

From Sciencemadness Wiki
Jump to: navigation, search
Line 4: Line 4:
  
 
'''Tetrachlorocupric acid '''is an [[Acid|acid]] formed from the [[tetrachlorocuprate]] ion. It is not stable as a solid, rather converting back to [[hydrochloric acid|h]][[hydrochloric acid|ydrochloric acid]] and [[copper(II) chloride]]. However, it is an extremely useful [[Printed circuit board etchant|printed circuit board (PCB) etchant]].
 
'''Tetrachlorocupric acid '''is an [[Acid|acid]] formed from the [[tetrachlorocuprate]] ion. It is not stable as a solid, rather converting back to [[hydrochloric acid|h]][[hydrochloric acid|ydrochloric acid]] and [[copper(II) chloride]]. However, it is an extremely useful [[Printed circuit board etchant|printed circuit board (PCB) etchant]].
 +
 
==Properties==
 
==Properties==
 
Tetrachlorocupric acid exists as a green solution due to the presence of [[tetrachlorocuprate]] ions. It is stable, but may emit some hydrogen chloride, so it should be stored in a capped container to prevent degradation.
 
Tetrachlorocupric acid exists as a green solution due to the presence of [[tetrachlorocuprate]] ions. It is stable, but may emit some hydrogen chloride, so it should be stored in a capped container to prevent degradation.
Line 24: Line 25:
 
Crude tetrachlorocupric acid can be made by mixing 2 moles of a strong acid, 1 mole of a copper salt, and 4 moles of a chloride source, preferably [[sodium chloride]] or [[potassium chloride]]. The [[spectator ions]] should not interfere. Do not use [[nitric acid]] for this, as it will create [[aqua regia]] and decompose. (Nitric acid itself works as a PCB etchant.)
 
Crude tetrachlorocupric acid can be made by mixing 2 moles of a strong acid, 1 mole of a copper salt, and 4 moles of a chloride source, preferably [[sodium chloride]] or [[potassium chloride]]. The [[spectator ions]] should not interfere. Do not use [[nitric acid]] for this, as it will create [[aqua regia]] and decompose. (Nitric acid itself works as a PCB etchant.)
  
 +
[[Category:Chemical compounds]]
 +
[[Category:Inorganic compounds]]
 +
[[Category:Copper compounds]]
 
[[Category:Acids]]
 
[[Category:Acids]]
 +
[[Category:Oxidizing agents]]
 +
[[Category:PCB etchants]]
 +
[[Category:Easily prepared chemicals]]

Revision as of 16:03, 20 August 2015

File:IMGP0020.jpg
Tetrachlorocupric acid formed from copper metal, hydrochloric acid, and hydrogen peroxide as an intermediate in the synthesis of copper(II) chloride

Tetrachlorocupric acid is an acid formed from the tetrachlorocuprate ion. It is not stable as a solid, rather converting back to hydrochloric acid and copper(II) chloride. However, it is an extremely useful printed circuit board (PCB) etchant.

Properties

Tetrachlorocupric acid exists as a green solution due to the presence of tetrachlorocuprate ions. It is stable, but may emit some hydrogen chloride, so it should be stored in a capped container to prevent degradation.

When exposed to copper, the tetrachlorocuprate ion comproportionates with the copper metal to form the dichlorocuprate(I) ion:

CuCl42- + Cu → 2CuCl2-

For simple etching, the presence of tetrachlorocuprate is enough to do the job. However, the acidity of tetrachlorocupric acid has the added bonus of allowing the solution to regenerate and be reused when exposed to air:

4H+ + 8Cl- + 4CuCl2- + O2 → 4CuCl42- + 2H2O

This reaction can be accelerated by adding hydrogen peroxide.

Tetrachlorocuprates are able to dissolve many other metals, notably aluminum.

Production

Pure tetrachlorocupric acid is not commerically available, but it can be made easily from hydrochloric acid and copper(II) chloride by mixing them together in a 2:1 molar ratio. It can also be made by dissolving copper(II) oxide, copper(II) carbonate, or copper(II) hydroxide in hydrochloric acid in a 4:1 molar ratio.

Crude tetrachlorocupric acid can be made by mixing 2 moles of a strong acid, 1 mole of a copper salt, and 4 moles of a chloride source, preferably sodium chloride or potassium chloride. The spectator ions should not interfere. Do not use nitric acid for this, as it will create aqua regia and decompose. (Nitric acid itself works as a PCB etchant.)