Difference between revisions of "Heating bath"

From Sciencemadness Wiki
Jump to: navigation, search
(Types)
 
(3 intermediate revisions by the same user not shown)
Line 9: Line 9:
 
==Types==
 
==Types==
 
===Water bath===
 
===Water bath===
The most common type of bath, it consists of a borosilicate glass or metal open pot filled with water. Distilled water is preferred, to limit corrosion of the pot. Water often used as it has high heat capacity, but the biggest downside is that it will release vapors at high temperature.
+
The most common type of bath, it consists of a borosilicate glass or metal open pot filled with water. Distilled water is preferred, to limit corrosion of the pot. Water is often used as it has high heat capacity, but the biggest downside is that it will release vapors at high temperature.
  
 
===Oil bath===
 
===Oil bath===
Uses oil as heat carrying medium. The most common oil used are silicone oil, [[mineral oil]], olive oil, cottonseed oil. While oil has lower heat capacity than water, it can reach higher temperature and is less volatile.
+
[[File:Oil bath pot.jpg|thumb|250px|A lab cast iron pot with oil]]
 +
Uses oil as heat carrying medium. The most common oil used are silicone oil, [[mineral oil]], olive oil, cottonseed oil. While oil has lower heat capacity than water, it can reach higher temperature and is less volatile. Oil baths should not be heated using an open flame without a thermometer or some other temperature controller, as in the event the smoking point of the respective oil is reached, the open flame may ignite the oil vapors.
  
 
===Liquid metal bath===
 
===Liquid metal bath===
Line 19: Line 20:
 
Other alloys used are: Bi-Pb-Sn-Cd-In-Tl (41.5 °C), Cerrolow 117 (47.2 °C), Cerrolow 136 (m.p. 58 °C), Cerrosafe (74 °C), Field's metal (m.p. 62 °C), Galinstan (−19 °C), Rose's metal (m.p. 94-98 °C), etc.
 
Other alloys used are: Bi-Pb-Sn-Cd-In-Tl (41.5 °C), Cerrolow 117 (47.2 °C), Cerrolow 136 (m.p. 58 °C), Cerrosafe (74 °C), Field's metal (m.p. 62 °C), Galinstan (−19 °C), Rose's metal (m.p. 94-98 °C), etc.
  
While [[mercury]] would be an attractive metal bath, heating releases toxic and harmful mercury vapors, so it's best to avoid this idea.
+
While [[mercury]] would be an attractive metal bath at first glance, heating it releases toxic, extremely harmful and corrosive mercury vapors, so it's best to avoid this idea.
  
 
===Sand bath===
 
===Sand bath===
Line 30: Line 31:
 
[[Sodium chloride|Table salt]] (NaCl) has a thermal conductivity of 6.15 W/(m·K) at 16 °C, which allows it to transfer heat more effectively than water or oil. Biggest disadvantage is that chloride ions are corrosive to metal pots, which means that glass items are more suitable for heating.
 
[[Sodium chloride|Table salt]] (NaCl) has a thermal conductivity of 6.15 W/(m·K) at 16 °C, which allows it to transfer heat more effectively than water or oil. Biggest disadvantage is that chloride ions are corrosive to metal pots, which means that glass items are more suitable for heating.
  
Some SM users have found that salt baths aren't very effective at heat transfer, while others have found the opposite. Moisture seems to be a problem when heating it, as it tends to lump and harden.
+
Some SM users have found that salt baths aren't very effective at heat transfer, while others have found the opposite. Moisture seems to be a problem when heating it, as it tends to lump and harden. Particle size also influences heat transfer.
  
 
===Thermal beads===
 
===Thermal beads===
Thermal beads consist of small round-shaped aluminium beads, a few mm in diameter. The main advantage of using thermal beads is that it's clean, easy to remove and there is little risk of contaminating the reagents.  
+
Thermal beads consist of small round-shaped aluminium beads, a few mm in diameter. The main advantage of using thermal beads, compared to metallic powder, is that it's clean, easy to remove and there is little risk of contaminating the reagents.  
  
===Wax bath===
+
===Molten wax bath===
[[Paraffin wax]] can be used as a high temperature bath, as it boils at a higher point than oil. Main disadvantage is that it tends to leave lots of wax on the flasks, which is a pain to properly remove.
+
[[Paraffin wax]] can be used as a high temperature bath, as it boils at a higher point than oil. Main disadvantage is that it tends to leave lots of wax on the flasks after it cools, which is a pain to properly remove.
  
 
==References==
 
==References==

Latest revision as of 22:10, 2 August 2020

A heating bath is a heat transfer setup which is designed to transfer heat to a reaction flask, by using a liquid or powdered medium. Heating baths are often used in combination with a separate heating source, although heating bath devices are available and used.

Design

Heating baths are open metal containers, which contain a high temperature boiling fluid, which is heated by a separate heating source. The purpose of the fluid bath is to give an homogenous heating of the reaction flask as well as maintaining a constant temperature.

Specialized heating baths have an integrated fluid bath with an internal heating element, and the temperature is controlled via a thermostat.

Types

Water bath

The most common type of bath, it consists of a borosilicate glass or metal open pot filled with water. Distilled water is preferred, to limit corrosion of the pot. Water is often used as it has high heat capacity, but the biggest downside is that it will release vapors at high temperature.

Oil bath

A lab cast iron pot with oil

Uses oil as heat carrying medium. The most common oil used are silicone oil, mineral oil, olive oil, cottonseed oil. While oil has lower heat capacity than water, it can reach higher temperature and is less volatile. Oil baths should not be heated using an open flame without a thermometer or some other temperature controller, as in the event the smoking point of the respective oil is reached, the open flame may ignite the oil vapors.

Liquid metal bath

Low melting point alloys, such as Wood's metal (m.p. 70 °C), are used to heat reaction flasks to high temperatures, and can reach temperatures higher than those achievable with an oil bath.

Other alloys used are: Bi-Pb-Sn-Cd-In-Tl (41.5 °C), Cerrolow 117 (47.2 °C), Cerrolow 136 (m.p. 58 °C), Cerrosafe (74 °C), Field's metal (m.p. 62 °C), Galinstan (−19 °C), Rose's metal (m.p. 94-98 °C), etc.

While mercury would be an attractive metal bath at first glance, heating it releases toxic, extremely harmful and corrosive mercury vapors, so it's best to avoid this idea.

Sand bath

While sand isn't a very good heat conductor, it's readily available and can be used to heat vessels at high temperatures.

Powdered metal

Aluminium or copper powder can be used as an effective heat carrying medium, though you will need a lot of powder. Repeated heating will oxidize the metal powder further, which limits heat transfer, as aluminium and copper oxides doesn't conduct heat as good as the metal.

Salt bath

Table salt (NaCl) has a thermal conductivity of 6.15 W/(m·K) at 16 °C, which allows it to transfer heat more effectively than water or oil. Biggest disadvantage is that chloride ions are corrosive to metal pots, which means that glass items are more suitable for heating.

Some SM users have found that salt baths aren't very effective at heat transfer, while others have found the opposite. Moisture seems to be a problem when heating it, as it tends to lump and harden. Particle size also influences heat transfer.

Thermal beads

Thermal beads consist of small round-shaped aluminium beads, a few mm in diameter. The main advantage of using thermal beads, compared to metallic powder, is that it's clean, easy to remove and there is little risk of contaminating the reagents.

Molten wax bath

Paraffin wax can be used as a high temperature bath, as it boils at a higher point than oil. Main disadvantage is that it tends to leave lots of wax on the flasks after it cools, which is a pain to properly remove.

References

Relevant Sciencemadness threads