Difference between revisions of "Passivation"

From Sciencemadness Wiki
Jump to: navigation, search
(Created page with "Passivation refers to the covering of an active metal with an inert layer of oxide in the presence of oxygen. For example, metallic aluminium, when exposed to oxyg...")
 
 
(4 intermediate revisions by 3 users not shown)
Line 1: Line 1:
Passivation refers to the covering of an active metal with an inert layer of [[oxide]] in the presence of [[oxygen]]. For example, metallic [[aluminium]], when exposed to oxygen, becomes covered in a thin layer of [[aluminium oxide]] that prevents further oxidation. Passivation layers can be produced naturally though contact with air, or by anodization (as is often done with [[silver]], [[aluminium]], [[tantalum]] and [[niobium]]) or contact with [[nitric acid]] (as can be done with [[chromium]]) or [[chromic acid]] (as may be done with [[zinc]]).
+
{{Stub}}
 +
'''Passivation''' refers to the covering of an active metal with an inert layer of [[oxide]] in the presence of [[oxygen]] or some other nonmetal. For example, metallic [[aluminium]], when exposed to oxygen, becomes covered in a thin layer of [[aluminium oxide]] that prevents further oxidation. Passivation layers can be produced naturally though contact with air, or by anodization (as is often done with [[silver]], [[aluminium]], [[tantalum]] and [[niobium]]) or contact with [[nitric acid]] (as can be done with [[chromium]]) or [[chromic acid]] (as may be done with [[zinc]]).
 +
 
 +
==References==
 +
<references/>
 +
===Relevant Sciencemadness threads===
 +
 
 +
[[Category:Chemical processes]]
 +
[[Category:Techniques]]

Latest revision as of 22:43, 16 September 2019

Passivation refers to the covering of an active metal with an inert layer of oxide in the presence of oxygen or some other nonmetal. For example, metallic aluminium, when exposed to oxygen, becomes covered in a thin layer of aluminium oxide that prevents further oxidation. Passivation layers can be produced naturally though contact with air, or by anodization (as is often done with silver, aluminium, tantalum and niobium) or contact with nitric acid (as can be done with chromium) or chromic acid (as may be done with zinc).

References

Relevant Sciencemadness threads