Trinitroaniline

From Sciencemadness Wiki
Revision as of 19:47, 11 October 2020 by Mabus (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Trinitroaniline
Names
IUPAC name
2,4,6-Trinitroaniline
Other names
2,4,6-Trinitrobenzenamine
2,4,6-Trinitroaniline
Picramide
TNA
Type 97 bakuyaku
Properties
C6H4N4O6
Molar mass 228.12 g/mol
Appearance Yellow/orange/red solid
Odor Odorless
Density 1.762 g/cm3 (14 °C)
1.72 g/cm3 (20 °C)
Melting point 188–193.5 °C (370.4–380.3 °F; 461.1–466.6 K)
Boiling point Detonates
0.106 g g/100 ml (20 °C)[1]
Solubility Slightly soluble in acetone
Solubility in acetone 4.798 g/100 ml (20 °C)
Solubility in benzene 0.907 g/100 ml (20 °C)
Solubility in carbon disulfide 0.013 g/100 ml (17 °C)
Solubility in carbon tetrachloride 0.003 g/100 ml (17 °C)
Solubility in chloroform 0.322 g/100 ml (17 °C)
Vapor pressure ~0 mmHg
Thermochemistry
Hazards
Safety data sheet None
Related compounds
Related compounds
Picric acid
Trinitrotoluene
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Infobox references

2,4,6-Trinitroaniline, abbreviated as TNA and also known as picramide, a nitrated aromatic amine with the chemical formula C6H4N4O6. It is a powerful high explosive.

Properties

Chemical

TNA will react with hydrogen peroxide and conc. sulfuric acid to yield 1,2,4,6-tetranitrobenzene. The yield of the reaction is given as 93%.[2] If ozone is used instead of hydrogen peroxide, and the reaction takes place at room temperature for 72 hours, the yield of the reaction is 49%.[3]

Diazotized picramide coupled with β-naphthol yields a reddish product, more soluble in common solvents.[4]

TNA will decompose releasing carbon dioxide/monoxide. water, soot and unburnt side products.

Physical

TNA is a yellow solid, that has also been described as being orange or red. It is insoluble in water, but more soluble in organic solvents. Is melting point has been determined to be between 188-194 °C.[5][6][7]

Explosive

TNA is a sensitive explosive with a detonation velocity of 7,300 m/s.

Availability

TNA is not sold to the public being a dangerous explosive material.

Preparation

Nitrating 4-nitroaniline with dry sodium nitrate and conc. sulfuric acid, at 0-5 °C, for 3 hours will yield TNA, giving an yield of 58%.[8] If potassium nitrate is used instead, and the reaction time is doubled, while the reaction temperature is maintained between 50-110 °C, the yield of the reaction is 50%.[9] A mixture of nitrosylsulfuric acid, nitric acid and acetone stirred at 30 °C will also give TNA.[10]

Can also be prepared by heating a mixture of picric acid and diammonium hydrogen phosphate, ammonium carbamate or urea in sulfolane, at 25 - 175 °C for 22 hours, in an autoclave. Yield for this route is around 87-93%. Ammonium acetate and ammonium picrate can also be used instead, but the yield is lower, at 32%.[11]

Refluxing 2,4,6-trinitrochlorobenzene with ammonia in n-propanol for 3 hours at 100 °C will yield picramide, for an yield of 75%. [12] Ethanol and hydroxylammonium chloride can also be used instead.[13] Alternatively, a mixture of n-butylamine with tetra-n-butylammonium tetrafluoroborate in dimethylformamide can also be used, for an yield of 95%.[14]

Projects

  • Blasting caps
  • Compound collecting

Handling

Safety

Trinitroaniline is a dangerous explosive. Symptoms of exposure to this compound may include skin and eye irritation, headache, cyanosis and respiratory distress.

Storage

Should be kept wet, away from heat and reducing agent.

Disposal

Strongly diluted then neutralized with a diluted sol. of a base, before oxidation into harmless products.

References

  1. Desvergnes; Rev.Chim.ind.; vol. 40; (1931); p. 35
  2. Nielsen, Arnold T.; Atkins, Ronald L.; Norris, William P.; Coon, Clifford L.; Sitzmann, Michael E.; Journal of Organic Chemistry; vol. 45; nb. 12; (1980); p. 2341 - 2347
  3. Atkins, Ronald L.; Nielsen, Arnold T.; Bergens, Cynthia; Wilson, William S.; Journal of Organic Chemistry; vol. 49; nb. 3; (1984); p. 503 - 507
  4. J. Am. Chem. Soc. 1938, 60, 3, 725–726
  5. Mahmood, Javeed; Kim, Dongwook; Jeon, In-Yup; Lah, Myoung Soo; Baek, Jong-Beom; Synlett; vol. 24; nb. 2; (2013); p. 246 - 248
  6. Corona, Paola; Loriga, Mario; Costi, M. Paola; Ferrari, Stefania; Paglietti, Giuseppe; European Journal of Medicinal Chemistry; vol. 43; nb. 1; (2008); p. 189 - 203
  7. Mehilal; Sikder; Salunke; New Journal of Chemistry; vol. 25; nb. 12; (2001); p. 1549 - 1552
  8. Rosevear, Judi; Wilshire, John F. K.; Australian Journal of Chemistry; vol. 38; nb. 5; (1985); p. 723 - 733
  9. Mahmood, Javeed; Kim, Dongwook; Jeon, In-Yup; Lah, Myoung Soo; Baek, Jong-Beom; Synlett; vol. 24; nb. 2; (2013); p. 246 - 248
  10. Varma; Kulkarni; Journal of the American Chemical Society; vol. 47; (1925); p. 145
  11. US2005/38297
  12. Corona, Paola; Loriga, Mario; Costi, M. Paola; Ferrari, Stefania; Paglietti, Giuseppe; European Journal of Medicinal Chemistry; vol. 43; nb. 1; (2008); p. 189 - 203
  13. Nietzki; Dietschy; Chemische Berichte; vol. 34; (1901); p. 55
  14. Gallardo, Iluminada; Guirado, Gonzalo; Marquet, Jordi; Journal of Organic Chemistry; vol. 67; nb. 8; (2002); p. 2548 - 2555

Relevant Sciencemadness threads