| Search |
| [Next Page] |
Who here is capable of Non-Peroxide initiators?
[rquote=291724&tid=25018&author=Ral123]
Just make AP, treat it like nitrogen iodide or some ... |
10-7-2013 at 19:32
by: gnitseretni |
PLX type explosives
The 70/30 ratio of NM/NA is when you use 70% HNO3. How much would you use when using 90%+ concentrat ... |
8-7-2013 at 03:18
by: gnitseretni |
ETN drying(or not in this case) and recrystallization ?
Sounds like you have residual acid in your ETN. Wash it thoroughly to get rid of the acid before you ... |
24-6-2013 at 19:17
by: gnitseretni |
signatures
I don't think he's overreacting. I don't see how you thought that could go over well! |
23-6-2013 at 08:52
by: gnitseretni |
Source of Sodium Azide
Well, I'm afraid he's already too late. I sent Malford money for 150g. |
22-6-2013 at 10:24
by: gnitseretni |
Source of Sodium Azide
100g sounds about right.
EDIT: Are you getting 500g? Plante said he'll take half, so 250g for him ... |
22-6-2013 at 07:37
by: gnitseretni |
Source of Sodium Azide
I'll take some. |
22-6-2013 at 06:59
by: gnitseretni |
Any reason this distillation apparatus wouldn't be functional?
There's a guy here who got injured due to cheap glassware. Yeah, OK, he was making energetics.. but ... |
11-6-2013 at 18:18
by: gnitseretni |
Labexpress.com
Dangit! Missed that. Didn't expect that information to be right on their front page, I was searching ... |
10-6-2013 at 18:26
by: gnitseretni |
The short questions thread (3)
Does anyone know if Aluminum is resistant to Hydrazine Hydrate?
I have a tiny 250ml retort that' ... |
10-6-2013 at 17:59
by: gnitseretni |
Labexpress.com
Anybody heard anything (good or bad) or ordered from labexpress.com before? Any idea if they sell to ... |
10-6-2013 at 17:26
by: gnitseretni |
Insensitive/Practical Recreational Explosives
Don't let chemcam scare you, armistice19. |
9-6-2013 at 20:41
by: gnitseretni |
Insensitive/Practical Recreational Explosives
I don't think you have anything to worry about. I once ordered 6 gallons HNO3 and 4 gallons H2SO4 on ... |
9-6-2013 at 19:37
by: gnitseretni |
Insensitive/Practical Recreational Explosives
Go big or go home. That means you not only need a HE that's easily made but one that's also easily s ... |
2-6-2013 at 18:08
by: gnitseretni |
Insensitive/Practical Recreational Explosives
http://www.intheredexplodingtargets.com/
No blasting cap neccesary. Just shoot it with a high cal ... |
2-6-2013 at 06:14
by: gnitseretni |
signatures
[rquote=285963&tid=24274&author=chemcam]
[b]EliteForum[/b],
I was rude to you earlier to ... |
28-5-2013 at 17:54
by: gnitseretni |
Exploding high energy gases
http://en.wikipedia.org/wiki/Voitenko_compressor
"In a typical Voitenko compressor, a shaped char ... |
14-3-2013 at 18:21
by: gnitseretni |
Unconventional Shaped Charges
Hmm... I thought MN was comparable to NG in power and VOD.
I turned the container on my lathe as ... |
2-1-2013 at 16:13
by: gnitseretni |
Blasting Caps/Detonators
What does TMD stand for? |
1-1-2013 at 15:33
by: gnitseretni |
Unconventional Shaped Charges
Did a heck of a lot of reading up on shaped charges since yesterday. Went through lots of PDFs, one ... |
29-12-2012 at 21:12
by: gnitseretni |
brake fluid
http://www.youtube.com/watch?v=mpvdTnO5-eA
"My roommate and I mix 68% calcium hypochlorite pool s ... |
29-12-2012 at 08:17
by: gnitseretni |
Unconventional Shaped Charges
Another failed SC. Like the third one in a row or something. Pretty frustrating! 
2.3mm thick w ... |
28-12-2012 at 12:08
by: gnitseretni |
Funnel/trumpet liner vs straight cone?
Any updates, Fulmen? Was wondering if you managed to make liners with your method. I'm looking for a ... |
24-12-2012 at 08:42
by: gnitseretni |
The short questions thread (3)
My stirrer goes from 1 to 10 and the stir bar will hit the walls if I go past 7 regardless of how sl ... |
22-12-2012 at 15:05
by: gnitseretni |
The short questions thread (3)
What do you do when the stirbars keep flying into the walls of the container? The smaller (1"-1.5") ... |
22-12-2012 at 12:24
by: gnitseretni |
| [Next Page] |
