Sciencemadness Discussion Board
Not logged in [Login ]
Go To Bottom

Search
[Next Page]
Are HCl fumes not that strong or are these fumes not HCl?
I don't know about the other stuff but I accidentally left some muriatic acid open and a noticeable ...
11-6-2017 at 16:43
by: Archenemy_6
Get methanol from antifreeze?
^what he said. people use Heet for methanol injections in cars because it's just methanol.
6-5-2017 at 18:29
by: Archenemy_6
Media bottle on hotplate
I definitely plan on leaving it loose for the mixing but for sterilizing I was planning on tightenin ...
3-5-2017 at 19:57
by: Archenemy_6
Media bottle on hotplate
Not recommended but reasonable assumption that it will be ok duly noted. I would use a heating bath ...
2-5-2017 at 20:29
by: Archenemy_6
Media bottle on hotplate
I'll definitely use it with foil on a hotplate. Thanks for the advice.
Seeing as they're fairly pr ...
2-5-2017 at 19:42
by: Archenemy_6
Opinions on this HBr synth
I just watched a Nurdrage video on making HBr earlier. I read before hand about using NaBr or KBr wi ...
2-5-2017 at 18:01
by: Archenemy_6
Media bottle on hotplate
I was wondering if a media bottle would be ok to use on a hot plate. I'm making a small batch of aga ...
2-5-2017 at 17:52
by: Archenemy_6
Alternative hobbies that appeal to those with interest in chemistry
Sometimes I think I have too many hobbies for my own good. Between a full time job, amateur chemistr ...
29-4-2017 at 17:47
by: Archenemy_6
Distilling water
Hmm I hadn't really considered that. It is getting quite warm around here and there's plenty of sunl ...
10-4-2017 at 06:09
by: Archenemy_6
Distilling water
As far as using tap water my tap comes from a well and it's pretty hard water. I don't drink it I on ...
9-4-2017 at 18:37
by: Archenemy_6
Distilling water
Thanks for the advice. I'm not looking for extremely pure water I am mainly trying to save myself a ...
30-3-2017 at 21:26
by: Archenemy_6
Distilling water
So I decided to distill some tap water in my pressure cooker and instead of getting some metal tubin ...
30-3-2017 at 20:20
by: Archenemy_6
Storage of volatile solvents?
I purchased these glass bottles from Uline that seem to be pretty nice I have a few things stored i ...
22-3-2017 at 20:18
by: Archenemy_6
Diethyl Ether
The petroleum gases do list a boiling point of -40 to 80 C. I imagine this is probably the main impu ...
2-3-2017 at 21:24
by: Archenemy_6
Diethyl Ether
I used about half my starting fluid and collected everything under 40 C. I'll do the same for the ot ...
2-3-2017 at 20:40
by: Archenemy_6
Diethyl Ether
I have a 200mm Vigreux column that I'm using but I also have a 400mm that I could try. The MSDS show ...
2-3-2017 at 19:11
by: Archenemy_6
Diethyl Ether
It seems quite a bit came over before even 30 C it does have a strong ether smell but I'll redistill ...
2-3-2017 at 18:53
by: Archenemy_6
Diethyl Ether
So I'm attempting to distill some diethyl ether from a starting fluid advertising 50% ether. I saw a ...
2-3-2017 at 18:24
by: Archenemy_6
Extraction of ethanol from gasoline
I purchased a 750ml bottle of 95% everclear a couple weeks ago it was right around $20 I think. I've ...
26-2-2017 at 20:17
by: Archenemy_6
Liquid Fuel and Oxidizer for rockets
I appreciate the advice. It's about what I expected.
I will look into.
26-2-2017 at 13:30
by: Archenemy_6
Liquid Fuel and Oxidizer for rockets
I'm not dissing solids I've just always liked liquids better.
I've seen plenty of resources on how ...
26-2-2017 at 12:35
by: Archenemy_6
Liquid Fuel and Oxidizer for rockets
Not sure if this is the right place for this sort of topic but I've been thinking a lot about model ...
25-2-2017 at 23:19
by: Archenemy_6
Dodgy chinese glass transactions
I'm very new to the whole chemistry and glassware but I've ordered direct from Laboy's website and o ...
21-2-2017 at 18:17
by: Archenemy_6
Heptane and Toluene
I was out of town for a few days but I just refluxed for about 45 minutes. I also found the data she ...
16-2-2017 at 20:27
by: Archenemy_6
Heptane and Toluene
I can get a reasonable amount of these cans for free so I'm really only spending my time. And as fa ...
13-2-2017 at 21:12
by: Archenemy_6
[Next Page]

  Go To Top