| Search |
| [Next Page] |
CDIC and the most incredible lachrymator ever
A few months later and I think I've figured out that it's either HClO or some decomposition product ... |
26-2-2018 at 23:33
by: DFliyerz |
CDIC and the most incredible lachrymator ever
I certainly remember this smell from when I made that copper salt; it makes me want to vomit just th ... |
31-10-2017 at 21:10
by: DFliyerz |
Thionyl chloride -- would this work?
Based on some calculations with my very limited knowledge of thermochemistry, I got the ΔG of the r ... |
12-10-2017 at 10:32
by: DFliyerz |
Thionyl chloride -- would this work?
I might, if I have a particularly good use for thionyl chloride. It's unfortunate that you couldn't ... |
11-10-2017 at 23:02
by: DFliyerz |
Thionyl chloride -- would this work?
Earlier today I was thinking about ways to make thionyl chloride, and saw a post on here suggesting ... |
11-10-2017 at 14:07
by: DFliyerz |
DCM storage
I use a 1L reagent bottle with no particularly special cap lining as far as I can tell, along with a ... |
12-8-2017 at 17:07
by: DFliyerz |
in which way could diamond powder/dust be turned solid
I've heard that sodium nickelate has been used to recrystallize diamonds. http://www.sciencedirect.c ... |
11-8-2017 at 10:07
by: DFliyerz |
Gallium and Silicon-containing Alloys
Earlier I was cleaning some gallium off of my ceramic hot plate with aluminum foil, and I noticed it ... |
19-7-2017 at 10:23
by: DFliyerz |
Vacuum filtration pump?
I use [url=https://www.amazon.com/gp/aw/d/B00DYA21PU/ref=mp_s_a_1_8?ie=UTF8&qid=1497882122&s ... |
19-6-2017 at 06:23
by: DFliyerz |
Copper Dichloroisocyanurate Complex Synthesis and Analogs.
Maybe it's just me, but when I made this compound it smelled awful. Even looking at it makes me thin ... |
7-5-2017 at 17:40
by: DFliyerz |
Science equipment looking for a home
Dr. Bob, have you ever considered doing a Google Spreadsheet for your inventory so you can update it ... |
20-4-2017 at 10:13
by: DFliyerz |
What exactly is the reaction between methylene chloride and aluminum?
Hmm, sounds like an interesting way of making some harder-to-get compounds, whatever those may be. A ... |
14-4-2017 at 11:27
by: DFliyerz |
Products of MgSO4 electrolosis and separation
The precipitate is probably mixed copper and magnesium hydroxides. |
3-3-2017 at 08:14
by: DFliyerz |
DOP Extraction and Base Hydrolysis to Phthalic Acid
I always solve this non-layering issue by adding table salt to make the layers form, since it'll be ... |
21-2-2017 at 09:49
by: DFliyerz |
Firebrick and Inert Gas
I'm planning to make an electrical resistance furnace using firebrick and resistance wire hooked up ... |
18-2-2017 at 12:05
by: DFliyerz |
Cuprate
Perhaps try dissolving it in water? I remember making a cuprate solution by electrolysing a sodium h ... |
19-1-2017 at 10:12
by: DFliyerz |
hotplate stirrer
I got one pretty much just like the one in your picture used for $100, and it's been excellent for t ... |
13-12-2016 at 12:17
by: DFliyerz |
dioxane gunk removal
I think Praixchys used acetone in one of his videos to clean it. |
6-12-2016 at 08:43
by: DFliyerz |
Should I use a ball mill for thermite?
A ball mill works excellently for aluminum powder from foil. |
13-10-2016 at 09:21
by: DFliyerz |
No More Ethyl Acetate
I recently appear to have lost my sole source of ethyl acetate, which was Target brand non-acetone n ... |
2-8-2016 at 12:23
by: DFliyerz |
Molten potassium thiocyanate
So, it's not possible, or it is possible just under certain conditions? |
11-7-2016 at 09:49
by: DFliyerz |
Molten potassium thiocyanate
I recently noticed that potassium thiocyanate has a very low melting point when anhydrous; 173.2C. I ... |
10-7-2016 at 12:11
by: DFliyerz |
Electrolysis of NaHCO3 solution with copper electrodes
As far as I know, the reaction produces sodium hydroxide and mixed copper carbonates until the sodiu ... |
1-7-2016 at 03:40
by: DFliyerz |
SAPARATE SILVER FROM TIN SOLDER
Dissolve the tin with hydrochloric acid, which you can then electroplate out to recover. Dissolve th ... |
1-7-2016 at 03:36
by: DFliyerz |
Best way to clean battery graphite rods?
I usually just scrape it off with a knife |
18-6-2016 at 18:27
by: DFliyerz |
| [Next Page] |
