| Search |
| [Next Page] |
Cutting with primary
The PIB is incorporated in the usual way: dissolved in gasoline, but without oil. The hardest part i ... |
28-3-2023 at 12:06
by: pdb |
Cutting with primary
Sorry guys, but I had to delete some recent data for some reasons. This makes the thread a bit shaky ... |
13-3-2023 at 05:51
by: pdb |
Cutting with primary
Nitrobenzenediazonium perchlorate, 50 mg + 4 mg PIB. In my experience, it is by far the most powerfu ... |
11-3-2023 at 15:22
by: pdb |
Measuring VOD
Synchronising measuring instruments such as oscilloscopes with such fast phenomena is not easy. Here ... |
9-2-2022 at 13:27
by: pdb |
Cutting with primary
This time I shot the back of the Bristol to avoid the camera being blinded by the flash of the deton ... |
30-11-2021 at 02:32
by: pdb |
Cutting with primary
Again, the nitrobenzenediazonium perchlorate provides a beautiful image, captured at 240 fps. I thi ... |
24-11-2021 at 14:03
by: pdb |
Trial with (NCN3)3
This time I tried to form a trail of CTA (cyanuric triazide) by melting (m.p. 94°).But once liquid, ... |
2-11-2021 at 08:36
by: pdb |
Cutting with AgN3
The same cutting experiment with AgN3 does not work well: the size of the crystals (much larger than ... |
26-10-2021 at 02:02
by: pdb |
Cutting with primary
The plexiglass assembly consists, from top to bottom, of a sheet of explosive (PETN preferable becau ... |
23-10-2021 at 01:39
by: pdb |
Cutting with primary
[rquote=666460&tid=158024&author=katyushaslab]nitrobenzenediazonium perchlorate? Is that the ... |
22-10-2021 at 07:29
by: pdb |
Cutting with primary
[rquote=666444&tid=158024&author=Laboratory of Liptakov]Finally someone with Art of primary ... |
21-10-2021 at 22:59
by: pdb |
Cutting with primary
Next try with a 41 cm path. Photo quality is poor due to lack of light.
[file]90631[/file] [fi ... |
21-10-2021 at 07:36
by: pdb |
Cutting with primary
Cutting test of bristol board with a primary explosive.The primer is nitrobenzenediazonium perchlora ... |
21-10-2021 at 06:56
by: pdb |
5-ATZ(5-Aminotetrazole), the nitrotetrazolate ion and friends
[rquote=660511&tid=8144&author=DBX Labs]the impure DBX-1 present in the first product cataly ... |
22-5-2021 at 06:18
by: pdb |
Advice from someone who has successfully prepared crystalline DBX-1
I have prepared DBX-1 according to Fronabarger twice, with similar results. I have no doubt about th ... |
11-5-2021 at 05:30
by: pdb |
Question about NaNT purification
I refer to "Facile method for preparation of NaNT" (US9,598,380). It works well and is indeed very e ... |
6-5-2021 at 23:01
by: pdb |
Brisance of some primaries
Both happened to be on the same aluminium sheet just because I had no other sheet left. The comparis ... |
13-5-2020 at 01:16
by: pdb |
Brisance of some primaries
Right. The fuse or the e-match were maintened over the opening in such a way that they didn't increa ... |
11-5-2020 at 04:35
by: pdb |
Brisance of some primaries
This is a short study comparing 4 uncommon primaries. |
11-5-2020 at 04:16
by: pdb |
Sensitivity of PETN to mechanical effects in non-aqueous solution
Gasoline is a generic name I used because I don't know the exact translation in your country of what ... |
15-7-2016 at 11:27
by: pdb |
Sensitivity of PETN to mechanical effects in non-aqueous solution
No, I want a product storable for years, which eliminates all gels containing NG and the like. |
15-7-2016 at 06:50
by: pdb |
Sensitivity of PETN to mechanical effects in non-aqueous solution
@hissingnoise : 12% of 50/50 PIB from self-amalgaming tape and oil SAE 10W. My trials with sebacate ... |
15-7-2016 at 05:56
by: pdb |
Sensitivity of PETN to mechanical effects in non-aqueous solution
I have to prepare some plastique, from a crop of PETN. However it is not flour-like, but rather crys ... |
15-7-2016 at 02:53
by: pdb |
Sebacate impact : none ?!
After purchasing bis(2-ethylhexyl) sebacate, I started testing around 20 combinations, with the foll ... |
2-6-2016 at 08:24
by: pdb |
E-Process failures
Sorry to dig up this old thread, but I didn’t find any better place in the forum to post my questi ... |
12-12-2012 at 08:03
by: pdb |
| [Next Page] |
