| Search |
Perchlorate compositions
Rosco- Tried your AP/MEKP 50/50 mix. Appeared that the good, oily component sank to the bottom, oppo ... |
18-9-2006 at 17:48
by: waxman |
Binaries ( reactive targets)
My MEKP doesn't freeze in the freezer overnight- stays oily liquid.
Thanks for the "partially froze ... |
31-8-2006 at 18:24
by: waxman |
Binaries ( reactive targets)
Canuck- that does seem a tad "excessive" for a gun range!
I've been using 10 ml of MEKP in a small ... |
31-8-2006 at 03:01
by: waxman |
Needed: Thermocouple resistance vs temperature chart
Thermocouples are best used with the instrument specifically designed to convert their micro/milli v ... |
19-6-2006 at 02:47
by: waxman |
Tannerite
Canuck- Quite the reactive target! What was in it? |
12-6-2006 at 02:25
by: waxman |
Tannerite
AP alone goes off with a nice flash/bang with a 2550 fps .17HMR bullet. It would be ideal if it coul ... |
5-6-2006 at 16:49
by: waxman |
Liquid chlorine eplosive
Doubtful. http://www.nchz.sk/en/PRODUCTS/INORG/cl2.htm |
4-6-2006 at 18:12
by: waxman |
Red Flash Powder
The thread on Flash Powder revels in the wonders of KMnO3, Al, and Sulfur. Best advice is to not lea ... |
3-6-2006 at 19:07
by: waxman |
Flash Powder
Hey kaBOOM- some would say making a pound of flash is also "INSAIN"!
I'm trying an ounce or two. |
30-5-2006 at 16:31
by: waxman |
dimethyl ether
Tried both propane and MAPP. Propane fires easier, and I can't get a comparable big blast from the M ... |
4-5-2006 at 17:04
by: waxman |
dimethyl ether
Indeed! Cranked the propane down, and boom! Nice! I'm shooting the gas in by an air chuck/Shrader fi ... |
30-4-2006 at 11:24
by: waxman |
dimethyl ether
Thank you, Swany! I've built a propane injector, but using a 6" X 1/2" pipe section as a "resevoir". ... |
30-4-2006 at 05:54
by: waxman |
dimethyl ether
Looking for non-sticky alternatives to hairspray as a fuel for a spudgun. Any ideas? |
29-4-2006 at 19:23
by: waxman |
