Sciencemadness Discussion Board

Synthesis of Arecoline - 3 Steps from Nicotinic Acid

Arrhenius - 22-8-2010 at 14:22

<div style="text-align: center;"><span style="color: Red;">
**Caution! Iodomethane is a probable carcinogen and is highly volatile!**
**Caution! Arecoline is a possible carcinogen and is biologically active!**</span></div></strong><br />


Arecoline is an alkaloid natural product found in the fruit of the Areca palm, Areca catechu. The fruit, known colloquially as betel nuts, is used recreationally in various Pacific and Asian cultures for its mild stimulant properties, and is also used in Ayurvedic medicine and traditional Chinese medicine. Arecoline is a muscarinic acetylcholine M1 and M2 receptor agonist, and has generated moderate interest in academic research for use in Alzheimer's and other neurodegenerative conditions, though its application is hindered by the compound's reported carcinogenicity (see Wikipedia). Additionally, the strucuture-activity relationship of arecoline analogues is of continued interest in medicinal chemistry.[1, 2, 3] While arecoline itself is commercially available and relatively inexpensive, its synthesis is presented here as an 'intermediate' level synthesis, and an extremely brief 'total synthesis'. This route utilizes a Fischer esterification,[4] N-methylation and semi-reduction using in situ generated sodium triacetoxyborohydride.[5] Arecoline hydrobromide was obtained 11% overall yield starting from nicotinic acid - no attempt was made to optimize yield.

arecoline scheme1.gif - 6kB


Discussion
The Fischer esterification of nicotinic acid proceeds in good yield provided sufficient sulfuric acid is present, and provided the reaction is allowed to run long enough. N-methylation proceeded uneventfully in excellent yield. Though literature preparation of N-methyl pyridinium salts generally call for toluene and/or heating, this reaction was found to proceed in acetone at room temperature overnight. The subsequent semi-reduction of this methylpyridinium salt to the tetrahydropyrdine has also been reported using sodium borohydride in biphasic benzene/water [6](lit. 42%), though the purported yield with sodium triacetoxyborohydride is higher (lit. 67%). Sodium triacetoxyborohydride is a mild reducing agent, and will selectively reduce iminium species and aldehydes. Note that the pyridinium species produced here could be considered an "ene-iminium" ion - upon reduction of the first iminium, the enamine can tautomerize to the iminium and undergo reduction. Sodium borohydride is not expected to provide this selectivity, and is more likely to give methyl 1-methylpiperidine-3-carboxylate as a by-product. The crude 1H-NMR of the triacetoxyborohydride reduction indicated good conversion to product, but fractional crystallization of the product as the hydrobromide salt proved difficult. Modification of this purification step would likely improve yield dramatically. It is uncertain whether the hydrochloride salt is comparable to the hydrobromide produced here. On a small scale (<1g), this reduction proceeded in >50% isolated yield.

arecoline scheme2.gif - 5kB

arecoline scheme3.gif - 3kB


Experimental

Methyl Nicotinate
Nicotinic acid (25g, 203mmol) was suspended in methanol (75ml) and sulfuric acid (30ml) was added cautiously over ~1 hr. The now homogeneous mixture was refluxed for 2 hrs, cooled to room temperature, poured into chipped ice and basified to pH >10 with solid potassium carbonate <span style="color: Red;">(**Caution! A large amount of CO2 is evolved**)</span>. The basic solution was extracted with ethyl acetate (3x 75ml), and the combined organic phase was dried over magnesium sulfate, filtered and concentrated to give methyl nicotinate as a lightly colored oil which solidified upon standing (20.40g, 73%).

3-(methoxycarbonyl)-1-methylpyridinium iodide
Methyl nicotinate (20.40g, 149mmol) was dissolved in acetone (200ml), the solution was cooled to 0ºC and iodomethane (28ml, 447mmol) was added with stirring (no exotherm observed). The reaction vessel was wrapped in aluminum foil, andthe reaction was allowed to warm to room temperature and stand overnight. The thick suspension was filtered, rinsed with acetone, and dried in vacuo to give the title compound as a light yellow, hygroscopic solid (37.57g, 91%). This material was used without purification, but may be recrystallized from ethanol.

Methyl 1-methyl-1,2,5,6-tetrahydropyridine-3-carboxylate hydrobromide
3-(Methoxycarbonyl)-1-methylpyridinium iodide (37.57g, 135mmol) was dissolved in a mixture of methanol (150ml) and glacial acetic acid (80ml) and cooled to 0ºC. Sodium borohydride (10.21g, 270mmol) was added in portions over ~1 hr <span style="color: Red;">(**Caution! A large amount of H2 is evolved! Hydrogen is extremely flammable!**)</span> The reaction mixture was an intense orange color (see below). The mixture was stirred for 3hrs, then quenched with water (50ml), washed with diethyl ether (2x 75ml), basified to pH >10 with solid NaOH while cooling in an ice bath, and extracted with DCM (3x 100ml). The combined DCM extract was dried over MgSO4, filtered and concetrated to give 17.65g of a red oil (84% crude, see NMR below). This oil was dissolved in water (ca. 100ml) and acidified to pH ~4 with hydrobromic acid. The water was evaporated in vacuo to give a red-brown foam. The residue was dissolved in hot ethanol, and diethyl ether added to induce crystallization. Only one crop of crystals could be obtained, which was recrystallized from ethanol/ether to give the title compound as a light yellow crystalline solid. Structure was confirmed by NMR and melting point (4.97g, 16%. MP 167-172ºC).

stab reduction.jpg - 89kB
Sodium triacetoxyborohydride reduction

arecoline product.jpg - 152kB
Purified product

Spectra

1H-NMR crude free base (CDCl3)
arecoline_crude1Hnmr.jpg - 14kB

1H-NMR Purified Hydrobromide (D2O)
arecoline_hbr_1Hnmr.jpg - 18kB

13C-NMR Purified Hydrobromide (D2O)
arecoline_hbr_13Cnmr.jpg - 20kB

13C-NMR v. DEPT-135 Purified Hydrobromide (D2O)
arecoline_hbr_13Cdept135.jpg - 31kB


References
1. Arkivoc 2009 (ix) 45-56.
2. Eur J Med Chem. 2009, 44(12):4848-54.
3. Eur. J. Pharmacol (1987), 134(1), 61-67
4. J. Am. Chem. Soc. (1951) 73, 5614
5. Chin. J. Pharmaceuticals (Zhongguo Yiyao Gongye Zazhi) 2004, 35(5) 265.
6. Khimiko-Farmatsevticheskii Zhurnal, Vol, 10, No, 11, pp. 90–91, November, 1976.

[Edited on 24-8-2010 by Arrhenius]

Nicodem - 23-8-2010 at 15:38

Beautiful!

The first total synthesis at Sciencemadness! Your contribution is so perfect that I have nothing to add. Well, except that you misspelled "ethyl nicotinate" everywhere where "methyl nicotinate" should be. :P

Though of topic, while we are on topic of arecoline, I might just as well attach the chapter on arecoline analogues and their SAR for those more medicinal chemistry oriented rather than total synthesis motivated. There are some interesting synthetic approaches described though:

Muscarinic Agonists for the Central Nervous System
Raymond Baker and Angus M . MacLeod
in: Drug Design for Neuroscience (ed. by Alan P. Kodkowski)

Attachment: Muscarinic agonists for the central nervous system.pdf (581kB)
This file has been downloaded 2168 times


Arrhenius - 23-8-2010 at 18:54

Haha, thank you Reviewer #1 - I wont' tell you I made the ethyl ester as well. Changes made as noted :P. I'm a little bummed with the yield, but that's life. Perhaps dropping this stuff out of ether as its hydrochloride would be a viable workup, and circumvent possible ester hydrolysis in the way I did it. Hope you enjoy the NMR - sorry it's a bit difficult to read - I just love having a DRX-500 at my house!

Quantum_Dom - 28-8-2010 at 17:35

Really the first one ever ? Now I had to comment as knowing this, coupled to the fact that I find your report impeccable, deserves nothing less than a very cheerful congratulations ! :)

Are Q&A's still a possibility though ? :P A very quick one if you dont mind :D.

Is theyre any reasons, besides the chemical environment, that proton HA has such a high chemical shift ? It certainly has been a while since my last 1H NMR analysis but instinctively I would never have thought such a proton would be that deshielded. Though I tend to point towards a possible reason that it is part of an alpha-beta unsaturated carbonyl system, I am not sure if it is actually the reason.

Hope my question makes sense. Again my compliments !

QD

[Edited on 29-8-2010 by Quantum_Dom]

DJF90 - 29-8-2010 at 03:16

Quantum_Dom: Vinylic protons are typically in the 5-6ppm region. Add to that the deshielding mesomeric effect afforded by the ester group in conjugation (would put a + charge on the carbon adjacent to that proton) and its reasonable cause for the its appearance at 7.1ppm.

Arrhenius: Nice work mate. Would be nice to see more work like this in the future. And you have a DRX-500 in your house??! That must cost a fortune, for the upkeep if not for the purchase!

Quantum_Dom - 29-8-2010 at 04:36

Quote: Originally posted by DJF90  
Quantum_Dom: Vinylic protons are typically in the 5-6ppm region. Add to that the deshielding mesomeric effect afforded by the ester group in conjugation (would put a + charge on the carbon adjacent to that proton) and its reasonable cause for the its appearance at 7.1ppm.


Eureka. Thanks DJF90 !

rrkss - 29-8-2010 at 08:08

Awesome writeup. I'm jealous that you have an NMR in your house. Would love to have one of those.

One question, in the first esterification, I notice you use an incredibly large amount of H2SO4. What is your reasoning behind that?

[Edited on 8-29-10 by rrkss]

Arrhenius - 29-8-2010 at 16:16

Quote: Originally posted by rrkss  
I'm jealous that you have an NMR in your house. Would love to have one of those.

One question, in the first esterification, I notice you use an incredibly large amount of H2SO4. What is your reasoning behind that?
[Edited on 8-29-10 by rrkss]


I was only joking, I merely have access to NMR facilities - I don't own one. :P As for the large excess of sulfuric acid, I tried several times with 'catalytic' or 1eq of acid, and found this to give very poor results. I would guess this is because the substrate is basic, so you're immediately protonating the substrate, and the conjugate acid is not effective in catalyzing the esterification. Additionally, using a large excess helps to desiccate the reaction, driving it to higher conversion (Le Chatelier principle).

DJF90: I've only got a few ideas for things to come... nothing to spectacular. I'd like to do something collaborative on here if possible - have several folks work on different steps. I like palladium catalysis, and was thinking about making dibenzylideneacetone, Pd2(dba)3 from Pd metal (Pd coins are cheap) and attempting benzopyran or benzodipyran synth via Heck rxn.

[Edited on 30-8-2010 by Arrhenius]

Nicodem - 30-8-2010 at 01:40

Funny to see how many actually believed one of our members has a 500MHz NMR machine at home, but it is possible after all. If you live in a university campus then you can kind of say that you have one at home.

In my experience, the fastest and higher yielding Fischer esterification to methyl benzoates is by using 150 mol% H2SO4, 1.5-2 mL MeOH per mmol substrate, and heating the mixture for about 1 h at 100 °C in an autoclave. It always gives excellent, near to quantitative yields, and was used also on some aminobenzoic acids where the yields were slightly lower though (~90%). Using conventional reflux took days on some difficult benzoic acids, particularly some hydroxy substituted ones, and the yields were always considerably worse. Not all acids are that difficult to esterify though, for example, for most aliphatic ones an hour of reflux in methanol is more than enough.

Arrhenius, here is an idea for you given that you found the reduction of the pyridinium interesting. Sodium dithionite could possibly reduce pyridinium salts, though using it on methyl nicotinate would probably give a mess and precautions to prevent hydrolysis would have to be used. However, you could try reducing N-benzyl pyridinium bromide (easily made) by refluxing in Na2S2O4/Na2CO3/H2O. I wander where would it stop and if it would give good selectivity for one end product.

Quote: Originally posted by Nicodem  
The first total synthesis at Sciencemadness!

I have to correct myself. I later remembered that Klute reported the synthesis of zingerone two years ago.

Arrhenius - 2-9-2010 at 23:39

Quote: Originally posted by Nicodem  
...precautions to prevent hydrolysis would have to be used. However, you could try reducing N-benzyl pyridinium bromide (easily made) by refluxing in Na2S2O4/Na2CO3/H2O. I wander where would it stop and if it would give good selectivity for one end product.


I would be very suprised if this was not hydrolyzed rapidly to the aldehyde (e.g. Zinke aldehyde synthesis; in itself interesting). I think STAB is quite selective as a 2e reducing agent, whereas dithionite would be initiating single electron reduction. Who knows. I'm not very familiar with dithionite though. On the note of single electron reductions, I'm very intrigued by the use of silicon in dissolving metal reductions.

Nicodem - 5-9-2010 at 08:18

Quote: Originally posted by Arrhenius  
Quote: Originally posted by Nicodem  
...precautions to prevent hydrolysis would have to be used. However, you could try reducing N-benzyl pyridinium bromide (easily made) by refluxing in Na2S2O4/Na2CO3/H2O. I wander where would it stop and if it would give good selectivity for one end product.


I would be very suprised if this was not hydrolyzed rapidly to the aldehyde (e.g. Zinke aldehyde synthesis; in itself interesting). I think STAB is quite selective as a 2e reducing agent, whereas dithionite would be initiating single electron reduction. Who knows. I'm not very familiar with dithionite though. On the note of single electron reductions, I'm very intrigued by the use of silicon in dissolving metal reductions.

I'm not aware of dithionite use in SET reductions. I always though it is a typical two electron reducing reagent.
Anyway, I did a preliminary experiment on the reduction of 1-benzylpyridinium chloride with Na2S2O4/Na2CO3/H2O and surprisingly the reduction goes all the way to N-benzylpiperidine!

Experiment:

To 1-benzylpyridinium chloride (415 mg, 2 mmol), Na2S2O4 (1750 mg, 10 mmol) and Na2CO3 (640 mg, 6 mmol) was added water (25 mL). Some gas evolution was observed during the dissolution and the resulting yellowish clear solution rapidly discoloured to completely colourless. This solution was refluxed for 5 h (without reaction progress monitoring), cooled and extracted with ethyl acetate (10 mL). The extract showed one major peak on HPLC and a little impurity on the more polar side. A HPLC run with a bit of toluene added as an internal standard confirmed that no reductive cleavage of benzylpyridinium to toluene occurred. TLC also showed one strong spot and some minor impurities. Part of the extract was rotavaped and analysed by NMR, which confirmed that the major product is N-benzylpiperidine (see Org. Synth. for 1H and 13C NMR spectral data of benzylpiperidine). NMR fits well and all the DEPT135 peaks are present also in the cited 13C NMR. The IR spectra also matched.

BnPip1H.gif - 46kB
BnPipDEPT.gif - 46kB
Edit: I corrected the phase in the DEPT135 spectra, which was previously upside down, and reuploaded it. For those who don't know what the peak phase in DEPT means: CH&CH3 carbons give a + phase (up), while all CH2 give a - phase (down), quaternary carbons give no signal (DEPT spectra are based on 13C-1H coupling), chemical shifts remain identical to 13C NMR.

[Edited on 10/9/2010 by Nicodem]

Arrhenius - 5-9-2010 at 11:31

Interesting. I didn't search very thoroughly, but it seems dithionite is known for reducing pyridinium salts, as well as an array of other functionality. As for the mechanism, I figured it was single electron reduction on the basis of dithionite generating alkyl radicals from alkyl halides. I don't know if it's still the consensus, but a couple papers implicate SET.

See:
J. Org. Chem. (1981) 46, 5457
J. Am. Chem. Soc. (1955) 77, 2261

I'd love to see your mechanistic proposal though :)

Nicodem - 5-9-2010 at 14:14

Ah, damn, I should have searched the literature first! I found it such a coincidence that I found a vial of benzylpyridinium chloride just a couple days after my previous reply above, that I just had to set up a reduction experiment. Now that I searched I found plenty of papers on the reduction of pyridiniums by Na2S2O4, though nearly all describing the reduction to 1,4-dihydropyridines. However, in an Chemistry Letters paper they obtained complete reductions on some substrates and say: "When N-benzylpyridinium chloride was reduced under the same conditions, the product isolated was N-benzylpiperidine (37%)."

As far as the mechanism goes, I always thought it goes kind of like in the path B of the JOC paper you cited above. Though the results of that study mainly confirms it, some other papers I encountered searching raised some new doubts. So I got convinced things may not be that simple. It is surprising how easily single electron transfer occurs in some of these sulfo reagents(considering in particular the related thiourea dioxide), so SET reductions are not to be ruled out.

Well, I learn new things every day. Bellow is the relevant excerpt from Comprehensive organic synthesis: Reduction, Volume 8
(Ian Fleming) that kind of minireviews this (off) topic:

pyridinium.gif - 104kB

[Edited on 5/9/2010 by Nicodem]

Arrhenius - 5-9-2010 at 15:47

Ya, I think the dihydropyridine outcome sort of points to single electron processes. I can see how substitution might greatly alter this Birch-type reactivity. Hm. Very interesting. It's great that the reaction was pretty clean for you. No benzylamine either it sounds like - so no hydrolysis of intermediates. The obvious difference is in the conditions. It's plausible that the dihydropyridine (shown above) is rapidly formed (they say 0-10ºC, 10min), and forced to saturation under refluxing conditions, which is not possible under Birch conditions.

Sandmeyer - 6-9-2010 at 03:27

Nice work there Arrhenius! :o :D Btw, have you tried using plain NaBH4 for the reduction of pyridinium for a better yield? During model studies, a couple years ago, I got decent yields of arecoline and some of its analogues from corresponding pyridiniums, using plain NaBH4. I have the lab-notebook at my previous job so I can't give any experimental details, but I followed the method in last entry (lysergic acid): https://www.erowid.org/archive/rhodium/chemistry/lysergic.he...

[Edited on 6-9-2010 by Sandmeyer]

Arrhenius - 9-9-2010 at 22:25

Thank you. No, I did not try plain borohydride. As I mentioned above, the literature cites STAB as being a milder more selective reagent. NaBH4 in alcohol seems like it would work fine. I'm not really sure why some literature syntheses use biphasic reduction conditions - seems unnecessary and likely to degrade the pyridinium salt.

Sandmeyer - 10-9-2010 at 12:41

There is a nice, scaled-up procedure from a paper entitled Tetrahydropyridyloxadiazoles: semi-rigid muscarinic ligands, see J. Med. Chem., 1991, 34 (3), pp 1086–1094 DOI: 10.1021/jm00107a032


arrhenius-arecoline.GIF - 19kB

Arrhenius - 12-9-2010 at 22:35

Ah. I'm aware that this works, but I was concerned about over reduced side products, which might be difficult to remove by means other than chromatography. Along that line, I'm willing to bet that chromatography or distillation post-reduction would significantly improve yield. Chromatography free synthesis is commendable, but my report above definitely didn't pull it off that well.

UnintentionalChaos - 4-12-2010 at 19:12

Quote: Originally posted by Arrhenius  
Ah. I'm aware that this works, but I was concerned about over reduced side products, which might be difficult to remove by means other than chromatography. Along that line, I'm willing to bet that chromatography or distillation post-reduction would significantly improve yield. Chromatography free synthesis is commendable, but my report above definitely didn't pull it off that well.


Real men use chromatography. Honestly, having done a fair share of them now, it's not all that difficult for small quantities (of course, I'm from the flash chromatography camp and we had solvent recycling stills available)

If I'd written up my total synthesis of 6,6'-dibromoindigo a few months ago, I would have beaten you to first total synth on science madness. But oh well, I'll enjoy my tube of precious purple powder. :D

manimal - 12-5-2014 at 18:48

It might be worthwhile to try aluminum amalgam for reducing the methyl nicotinate methiodide, since it is also a mild agent capable of reducing iminiums.