Sciencemadness Discussion Board

Copper Cyanurate > mystery compound?

numos - 13-3-2014 at 20:27

Ok... So I saw this substance mentioned in various posts here and there and I think it deserves its own topic.

For those who don't know, this substance can be made by reacting a Copper sulfate solution with an Na-DCCA solution. It quickly forms a dense purple precipitate which can easily be filtered.

Here is a link to Woelen's site, which is where I found out about it.

http://woelen.homescience.net/science/chem/exps/raw_material...

It is this purple stuff I want to focus on. (image 2)

First off what is it called? I've found various names including copper cyanurate, "Copper (II) ions and dichloroisocyanurate ions", and even "the mystery compound." Also what would the chemical formula be?

Flame test: (Images f1-f4)
Very interesting - almost progressive, starting out yellow, then transitioning to purple, then to green, before burning away. The pictures below are in chronological order and are taken in a 15 second period. I smelled chlorine as it was burning, so I'm glad I did this outside.

Solubility:
Does not dissolve in water, haven't tried ethanol, toluene, or chloroform, I'll update when I do

Reactions:
As it's not a very commonly seen substance so I've only been able to find a few reactions:

With acetone - originally was going to do a solubility test, but instead it reacted to form a brown substance, neither the purple or the brown seemed soluble in acetone.

With HCl - A very rapid reaction, if you are going to do it, let me warn you add the products to each other very slowly. The mixture turns a bright green and seems to give of chlorine gas. It formed a white precipitate (image 3) which I filtered, and I set out the green solution to dry. You can see what I believe to be the anhydrous on the left and the hydrate on the right (image 4). An interesting note: I used a stainless steel spatula to scrape off the dried, green product, it was still slight wet and seemingly reacted to the steel, which now has a copper coating. (image 5) What happened there? :o Notice the brown copper contamination in the hydrate from reacting with the steel.

What would these two products be?


I haven't had time to try these but apparently copper cyanurate (I'm going to call it that until I know its name) also reacts with acetic acid, and hydrogen peroxide.

2.jpg - 84kB 3.jpg - 94kB 4.jpg - 82kB 5.jpg - 132kB

f1.jpg - 55kB f2.jpg - 51kB f3.jpg - 52kB f4.jpg - 54kB

[Edited on 3-14-2014 by numos]

thesmug - 13-3-2014 at 22:02

Some sort of coordination complex?

HeYBrO - 13-3-2014 at 22:30

The HCl, being the stronger acid, i presume protonates the salt and you get cyanuric acid ( the white solid ) and Copper chloride xH2O. I know that Copper chloride tarnishes SS. Try heating the Copper chloride to the anhydride, which is brown. Have you taken a melting point of the white substance? The chlorine i think would be from unreacted Na-DCCA in the precipitate (did you wash your product?) I get the green but the rest is unknown to me. (probably to do with its structure)

Nicodem - 14-3-2014 at 08:37

Quote: Originally posted by numos  
Ok... So I saw this substance mentioned in various posts here and there and I think it deserves its own topic.

You think it deserves its own topic, but you don't think it deserves a proper review of these older posts? I for one would like to read them.
Quote:
For those who don't know, this substance can be made by reacting a Copper sulfate solution with an Na-DCCA solution. It quickly forms a dense purple precipitate which can easily be filtered.

I may be missing something, but I don't see how this would give you any kind of copper cyanurate? You would need a redox reaction for such a transformation, yet you mention no strong enough reducing reagents.
Quote:
First off what is it called?

You can only give systematic names to characterized compounds. So, naming it requires either the determination of its molecular and/or crystal structure, or checking the literature for this particular product.
Quote:
With acetone - originally was going to do a solubility test, but instead it reacted to form a brown substance, neither the purple or the brown seemed soluble in acetone.

With HCl - A very rapid reaction, if you are going to do it, let me warn you add the products to each other very slowly. The mixture turns a bright green and seems to give of chlorine gas. It formed a white precipitate (image 3) which I filtered, and I set out the green solution to dry.


You did some interesting characterization tests. However, these reactions are not consistent with any copper(II) cyanurates, but they are consistent with what one would expect from copper(II) dichlorocyanurates. I would suggest to check the literature for these instead.

You can also do a check for dichlorocyanurate, by first reducing it to the chloride with any suitable reducing reagent (ascorbic acid, NaHSO3, NaNO2, etc., measure if there is an exotherm), acidify with H2SO4(aq) to precipitate the cyanuric acid, filter, and check the filtrate with AgNO3. A positive test would be a strong indicator that what you have is not a cyanurate, but a dichlorocyanurate instead.

Edit: The reaction of CuSO4 and sodium dichloroisocyanurate in water is described in US3055889 and is claimed to give Na2[CuL4] where L is the dichloroisocyanurate ligand: (C3N3O3Cl2)-. Described are also the preparation of analogous Ca, K, Ba and Li tetrakis(dichloroisocyanuro)cuprates (or whatever they are called). Analogous Cd and Ni coordination compounds are also reported.
US3115493 describes the preparation of a lead dichloroisocyanurate and this is then used in the preparation of Pb[CuL4].
An analogous potassium nickelate dichloroisocyanuric complex is also known (DOI: 10.1016/0022-1902(64)90014-4).

[Edited on 14/3/2014 by Nicodem]

numos - 15-3-2014 at 08:59

Quote: Originally posted by Nicodem  
Quote: Originally posted by numos  
Ok... So I saw this substance mentioned in various posts here and there and I think it deserves its own topic.


You think it deserves its own topic, but you don't think it deserves a proper review of these older posts? I for one would like to read them.

This topic mentions the purple substance:
http://www.sciencemadness.org/talk/viewthread.php?tid=20205


These mention Na-DCCA and TCCA but not the purple compound, however I used them to find the preparation of this substance
https://www.sciencemadness.org/whisper/viewthread.php?tid=90...
http://www.sciencemadness.org/talk/viewthread.php?tid=18624

Sorry for not posting it in the original thread, I'm still fairly new here, please forgive me.


So then the purple substance I have is Na2[Cu(C3N3O3Cl2)4]?

HeYBrO: I did a test with the green compound produced. First I heated the dark green one, which I thought was the hydrate, it turned brown black, under direct flame it gave off a blue green color. The light green which I thought was the anhydrous salt gave off an orange color > sodium flame?

Anyways they are not the same compound! :o

The way I set out the green solution to dry was I put it in a HDPE one gallon water jug with the top cut off so I have a 1 by 1 foot drying bin, and I place this at an angle so the compound collects in one corner.

The light green dried off at the slant, meaning lower solubility? The dark green collected in the corner... interesting way to separate compounds based on solubility [Both are probably contaminated though]. So the dark green matched the description of copper chloride, but I have no clue what the light green could be.

Edit: fixed spelling and clarified some phrases
[Edited on 3-15-2014 by numos]

[Edited on 3-15-2014 by numos]