Rosco Bodine - 17-11-2005 at 07:42
Here's an interesting and easily made compound which may have usefulness as an intermediate in organic syntheses , including the preparation of
polymers .
It may also have interest as a possible reactant and sensitizer for ammonium nitrate explosive compositions .
It possibly could also form energetic nitrosite type compounds .
Attachment: WO0078835A2 Triazone.pdf (781kB)
This file has been downloaded 1194 times
BASF - 17-11-2005 at 08:55
1,3,5-triazine-2-one, no?
Then this would be the K-6 backbone......triple nitrosation in acetic acid and oxidation with HNO3 99%, here we go 
But ... maybe this is too good to be true...
BTW, how can we purify the crude product?
[Edited on 17-11-2005 by BASF]
Rosco Bodine - 17-11-2005 at 09:27
About the purification I'm not sure , but the material is water soluble and is present in high concentration so in many reactions it could likely
be used without further purification .
There is another material which I have considered may have possible usefulness as a fusible binder for pyrotechnics . See the attached file .
Ketone N is polymerized cyclohexanone .
[Edited on 17-11-2005 by Rosco Bodine]
Attachment: Ketone N.pdf (70kB)
This file has been downloaded 1025 times
ordenblitz - 17-11-2005 at 17:34
quote:
----------------------------------------------
fusible binder for pyrotechnics
----------------------------------------------
You have my attention, please elaborate.
Rosco Bodine - 17-11-2005 at 19:35
Ketone N is cheap , ~$10 pound , and is a low melting 75 - 85 C hot melt adhesive sort of material which is neutral pH and non - reactive , chemically
stable material that is waterproof but soluble in organic solvents . It is used by conservators for
preserving oil paintings for museums and such , mixed with solvent and sprayed on as a protective sealant lacquer . It lasts
for decades without any deterioration or yellowing . There is an aerosol spray for
archival preservation of photographs , sold under the brand name Rembrandt ,
and the lacquer it contains is Ketone N .
It is probably possible to spray pyrotechnic powders or crystalline materials with a solvent carried film of Ketone N , and then press the
compositions warmed to the point where the Ketone N flows under pressure to
bind and seal the materials permanently upon cooling , also gluing the composition quite securely to the walls of its container .
There are other polymers which would work similarly , but Ketone N is probably one of the least expensive .
Rosco Bodine - 22-1-2007 at 19:13
Here's another easily made triazone which could be a useful intermediate .
Attachment: US3814753 Triazone variant.pdf (489kB)
This file has been downloaded 1263 times