Swinfi2
Hazard to Others
Posts: 131
Registered: 19-2-2018
Location: England
Member Is Offline
Mood: Catalytic
|
|
What would your first experiment be if you had access to room temperature superconductors?
While I recognise that this could just be a hype-train and might not be as easy as ("silver nanoparticles in a gold matrix") it seems. After reading
this Did iisc team find a room temperature superconductor..? I've been intrigued by the implications. If it is possible that any/most of us could be a
few relatively simple steps away from rt superconductors, what would you do with them first?
I would try to make a DIY H1 NMR (for it's obvious utility). But there are so many other possibilities I'm sure I've not even heard of most of them,
so what would you do?
|
|
Sulaiman
International Hazard
Posts: 3668
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
I'd probably build a giant coil of many many turns to create a large volume high intensity magnetic field to investigate something or other, then I'd
forget how much energy is stored in the field
and electrocute myself when switching off
If the CPR is successful then my second experiment will be at a smaller scale, levitation probably.
|
|
Herr Haber
International Hazard
Posts: 1236
Registered: 29-1-2016
Member Is Offline
Mood: No Mood
|
|
When talking about superconductors what is meant by room temperature is far below what most people understand.
I've had similar discussions when talking about super acids.
|
|
Sigmatropic
Hazard to Others
Posts: 307
Registered: 29-1-2017
Member Is Offline
Mood: No Mood
|
|
Do they mean room temperature, on the antarctic pole, during the middle of the polar winter?
|
|
SWIM
National Hazard
Posts: 970
Registered: 3-9-2017
Member Is Offline
|
|
I would have them tested and find out how they work and patent them and rake in the big bucks.
What advanced alien race or unknown genius is it that supplies me with this technology which does not yet exist on earth?
I would owe them a great debt of thanks.
|
|
Swinfi2
Hazard to Others
Posts: 131
Registered: 19-2-2018
Location: England
Member Is Offline
Mood: Catalytic
|
|
In the article they indicated two values, one around -20c and 20%ish granular supercoducting regions and the other was more speculative around +50c
(don't quote that I'm rounding) but that's if it's real, someone spotted a copy paste in the noise of a graph.
but in context I was referring to having the material without worrying about the details past what's needed.
|
|
weilawei
Hazard to Others
Posts: 130
Registered: 3-12-2017
Member Is Offline
Mood: No Mood
|
|
My research will require several liters of a chloroplatinic acid solution.
|
|
clearly_not_atara
International Hazard
Posts: 2771
Registered: 3-11-2013
Member Is Offline
Mood: Big
|
|
levitation obviously
but the article was debunked
|
|
Melgar
Anti-Spam Agent
Posts: 2004
Registered: 23-2-2010
Location: Connecticut
Member Is Offline
Mood: Estrified
|
|
If I had unlimited resources, then probably a tokamak. But I don't, so in all likelihood, I'd probably just build an energy-storage coil that could
be charged up and discharged to generate indoor lightning bolts.
The first step in the process of learning something is admitting that you don't know it already.
I'm givin' the spam shields max power at full warp, but they just dinna have the power! We're gonna have to evacuate to new forum software!
|
|
unionised
International Hazard
Posts: 5119
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
I think you may have muddled the term with "high temperature" superconductors.
High temperatures meant "warmer than liquid helium/ hydrogen"
I suspect that the first experiment I'd do with a room temperature superconductor would be to warm it up and measure the critical temperature.
Also, if anyone is planning to sell their soul to the devil for a room temp SC, remember that the critical temperature is not the only parameter that
matters.
The Horned One may offer you a material with a critical temperature of, for example, 30C, but a vanishingly small critical magnetic field strength.
You could have a material that's a SC- until you put any useful current through it, or a SC magnet that stops superconducting as soon as it's
usefully magnetised.
|
|
Ozone
International Hazard
Posts: 1269
Registered: 28-7-2005
Location: Good Olde USA
Member Is Offline
Mood: Integrated
|
|
Assuming I could put about 200A into it, probably make a cryo-free high-field NMR spectrometer.
O3
-Anyone who never made a mistake never tried anything new.
--Albert Einstein
|
|
GrayGhost-
Hazard to Self
Posts: 61
Registered: 31-10-2017
Location: Argentina
Member Is Offline
Mood: No Mood
|
|
Mmmmm I make the skate of McFly in back to future
|
|
Herr Haber
International Hazard
Posts: 1236
Registered: 29-1-2016
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by unionised |
I think you may have muddled the term with "high temperature" superconductors.
High temperatures meant "warmer than liquid helium/ hydrogen"
|
I think you are right
Last time I had this conversation with someone and researched a bit (10+ years ago) the highest operating temperatures were around room
temperature.
If your room was made of dry ice blocks in Siberia during the harshest winter ever.
Not as cold as helium, but far from the 20c° we all love.
|
|
Mr. Wizard
International Hazard
Posts: 1042
Registered: 30-3-2003
Member Is Offline
Mood: No Mood
|
|
i'd nest together three superconducting shells and make a stasis field.
|
|