xxxxx
Hazard to Others
Posts: 115
Registered: 21-5-2004
Member Is Offline
Mood: No Mood
|
|
2 stroke crankshaft vs 4 stroke crankshaft
in a 2 stroke engine the crankshaft is two discs with holes drilled for the pin for the main piston rod pin and some sort of thingamabob to transmit
power to the transmision. the crankshaft rests on beefy heavy duty bearings. in contrast the crankshaft for a four stroke engine requires complicated
machining and it rests on tiny soft metal bearings about as thick as a stick of gum and about as big. it seems like it would be better to make a four
stroke crankshaft more like a two stroke crankshaft.
|
|
|
bio2
Hazard to Others
Posts: 447
Registered: 15-1-2005
Member Is Offline
Mood: No Mood
|
|
Some Suzuki and Honda 4 strokes use ball bearing cranks.
Plain bearings are much quieter and don't necessarily wear out sooner than ball bearings.
|
|
|
xxxxx
Hazard to Others
Posts: 115
Registered: 21-5-2004
Member Is Offline
Mood: No Mood
|
|
piston rods for 2 stroke vs four stroke
another thing is the piston rods. in a four stroke the piston rods are two pieces which bolt together, because otherwise it would be impossible to get
the piston on the crankshaft. in a two stroke the piston is one piece and the main piston rod bearing is some needle bearings in a plastic cage.
removing the piston rod in a two stroke is a major hassle requiring a hydralic press of some force and precision. is there some reason why two stroke
piston rods couldn't be two pieces bolted together with the needle bearing cage in two halves?
|
|
|
12AX7
Post Harlot
Posts: 4803
Registered: 8-3-2005
Location: oscillating
Member Is Offline
Mood: informative
|
|
I might've seen them both ways, I'm not sure. I'm not big engine fanatic.
It's probably cheaper. Two strokes are small and cheap as hell, think about it.
Tim
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
