Abromination
Hazard to Others
Posts: 432
Registered: 10-7-2018
Location: Alaska
Member Is Offline
Mood: 1,4 tar
|
|
Tin from Solder
Doing some research on the forum, it seems a decent amount of people have tried to extract tin from solder with little success. I've found that it
really isnt that hard just to electrolyze a solution of sodium chloride with a solder anode and copper cathode.
Lead chloride precipitates out leaving a stannous chloride solution which can be electrolyzed to form tin crystals.
List of materials made by ScienceMadness.org users:
https://docs.google.com/spreadsheets/d/1nmJ8uq-h4IkXPxD5svnT...
--------------------------------
Elements Collected: H, Li, B, C, N, O, Mg, Al, Si, P, S, Fe, Ni, Cu, Zn, Ag, I, Au, Pb, Bi, Am
Last Acquired: B
Next: Na
-------------- |
|
|
DavidJR
National Hazard
Posts: 908
Registered: 1-1-2018
Location: Scotland
Member Is Offline
Mood: Tired
|
|
You can also get lead free solders, many of which are substantially tin and contain only small amounts of other metals like copper and silver.
|
|
|
VSEPR_VOID
National Hazard
Posts: 719
Registered: 1-9-2017
Member Is Offline
Mood: Fullerenes
|
|
lead sulfate and chloride I believe are insoluble
Within cells interlinked
Within cells interlinked
Within cells interlinked
|
|
|
12thealchemist
Hazard to Others
Posts: 181
Registered: 1-1-2014
Location: The Isle of Albion
Member Is Offline
Mood: Rare and Earthy
|
|
Lead chloride is noticeably more soluble in solutions where there is already a high chloride concentration.
|
|
|
DraconicAcid
International Hazard
Posts: 4278
Registered: 1-2-2013
Location: The tiniest college campus ever....
Member Is Offline
Mood: Semi-victorious.
|
|
Lead will form complex ions with excess chloride, so some of it will stay in solution. The sulphate may be a better choice- it doesn't coordinate
nearly as well.
Please remember: "Filtrate" is not a verb.
Write up your lab reports the way your instructor wants them, not the way your ex-instructor wants them.
|
|
|
ave369
Eastern European Lady of Mad Science
Posts: 596
Registered: 8-7-2015
Location: No Location
Member Is Offline
Mood: No Mood
|
|
I did a tin-lead separation by dissolving solder in nitric acid. Lead went into solution as lead nitrate, and tin ended up in precipitate as, I think,
tin dioxide or stannic acid. Of course, it was actually lead I was after, and the dioxide was discarded.
Smells like ammonia....
|
|
|
Fyndium
International Hazard
Posts: 1192
Registered: 12-7-2020
Location: Not in USA
Member Is Offline
|
|
My tin contains 99.3% Sn and 0.7% Cu. I wonder if it could be useful in any chemistry applications.
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
