ChemistryForever
Hazard to Self
Posts: 64
Registered: 6-12-2018
Member Is Offline
|
|
n-butyllithium
I'm planning to synthesize some n-BuLi under a homemade glove box in an argon atmosphere ( i mean like i put argon in that box from a tank, and an
oxygen detector to be sure that the oxygen level is as low as possible ). After the synthesis : would a rubber placed instead of the normal cap for a
bottle be good/safe, to ensure that no air gets in, so if i use it i use a syringe ?
|
|
|
Ubya
International Hazard
Posts: 1232
Registered: 23-11-2017
Location: Rome-Italy
Member Is Offline
Mood: I'm a maddo scientisto!!!
|
|
do you mean a rubber septa?
anyway, maybe a rubber septa alone could work, but a second safety device would be better, i've seen pyrophoric liquids are stored in metal (don't
know if metal is compatible with n-BuLi) cans with a ball valve AND a rubber septa. if you can manage to add a ball valve to your storage container
you can be pretty sure no air will get in, and yea use a syringe to pull the n-BuLi when you need it
---------------------------------------------------------------------
feel free to correct my grammar, or any mistakes i make
---------------------------------------------------------------------
|
|
|
Dr.Bob
International Hazard
Posts: 2659
Registered: 26-1-2011
Location: USA - NC
Member Is Offline
Mood: No Mood
|
|
A good rubber septa would be fine, I would just secure it with some wire, so it cannot pop off or leak. If you keep it lower in molarity, it is much
safer as well. Somewhere between 1.5 and 2.5 M is ideal.
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
