Merryp
Harmless
Posts: 29
Registered: 27-4-2019
Member Is Offline
|
|
Sodium oxide via decomposition of Sodium sulfate - would it work?
I think it's fair to assume that sulfur dioxide would be the first thing to go upon heating to decomposition temperature in an open crucible (or
distillation apparatus, if you
Question is how the rest of the molecule would act. If it's elemental sodium, that'd probably start evaporating as well, possibly reacting with the
SO2 again.
If it's going to form sodium oxide immediately, that'd be way more convenient, since it'll remain solid at that temperature range.
I think the latter case is probable, but I'm not entirely sure. Can sodium oxide be easily obtained by roasting the sulfate?
|
|
|
rockyit98
Hazard to Others
Posts: 283
Registered: 12-4-2019
Location: The Known Universe
Member Is Offline
Mood: no mood is a good mood
|
|
2NaOH------(HEAT)-------->Na2O+H20 works
but molten NaOH react with glass, Porcelain ,aluminium,stainless steel ,nickel,graphite must use
Magnesia(MgO) container aka crucible. if O2 free copper might work.
Na2CO3---(HEAT)------>Na2O +CO2
is the best so far. adding a vacuum pumps help a lot.
"A mind is a terrible thing to lose"-Meisner
|
|
|
Tsjerk
International Hazard
Posts: 3022
Registered: 20-4-2005
Location: Netherlands
Member Is Offline
Mood: Mood
|
|
Sulfur in sulfate is in oxidation state VI. It won't change upon heating. Therefore you won't get SO2.
No element will change in oxidation state. Guess again.
But then again, the temperature this will happen is high. And the reactants at that temp are quite reactive.
|
|
|
12thealchemist
Hazard to Others
Posts: 181
Registered: 1-1-2014
Location: The Isle of Albion
Member Is Offline
Mood: Rare and Earthy
|
|
Sodium sulphate can be thermally decomposed by heating, but this starts at around 1000°C and is very slow at this temperature, becoming appreciable
nearer 1400°C. At these extremes, the normally-evolved sulphur trioxide from the sulphate anion itself thermally decomposes into oxygen and sulphur
dioxide. Sodium oxide is the solid product, but for the amateur to reach these temperatures on any sensible scale, I wish him luck.
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
