Sciencemadness Discussion Board
Not logged in [Login ]
Go To Bottom

Printable Version  
Author: Subject: Hydrogenation of cinnamic aldehyde
finetune
Harmless
*




Posts: 14
Registered: 8-10-2019
Member Is Offline


[*] posted on 20-11-2019 at 13:31
Hydrogenation of cinnamic aldehyde


Good evening!
As I have some cinnamic aldehyde on the shelf I thought about reducing the double bond to get hydrocinnamic aldehyde.
At first I found the CTH article, but noting about a CTH reduction in acidic media, as the alkali will result in an unwanted aldol condensation.
Catalytic transfer hydrogenation of cinnamic acid in alkaline aqueous medium using PdCl2/HCOOH/NaOH
https://doi.org/10.1016/S0040-4039(00)01365-4

I came to the result to use a catalytic hydrogenation with 5% Pd/C in EtOH at low hydrogen pressure and preferably ambient temperature. but on further reading I became more confused the more I read. There is a shitload of articles regarding the catalytic reduction of alpha beta unsaturated aldehydes, most of the ones I had on the screen dealing with the selectivity of certain catalysts. That´s also why I became more and more confused (and most probably because I made the mistake of not taking notes).

The main question still in my head is about the solvent. I remember reading somwhere that the solvent can have a (high?) influene on the selectivity of the reduction. I would use 96% EtOH or anh. MeOH.

At the moment my conditions would be:
Cinnamic aldehyde
10 vol. eq. 96% EtOH or MeOH
1 to 5 mol% 5% Pd/C
3-5 bar H2
20°C

I tested my reactor up to 15 bar, 150°C, so this should be no problem here. If somebody has a grat catalyst wich requires higher pressure, I can build the reactor myself. I have quite a lot of metals in my collection, but no Raney alloy for example.

Ideas and suggestions are welcome!

Finetune

[Edited on 20-11-2019 by finetune]
View user's profile View All Posts By User
finetune
Harmless
*




Posts: 14
Registered: 8-10-2019
Member Is Offline


[*] posted on 20-11-2019 at 14:27


I just found an article wich describes Pd/C poisoned with diphenyl sulfide.
It´s pretty much what I was looking for :)

Chemoselective Hydrogenation Method Catalyzed by Pd/C Using Diphenylsulfide as a Reasonable Catalyst Poison
DOI: 10.1016/j.tet.2006.09.094
View user's profile View All Posts By User
Corrosive Joeseph
National Hazard
****




Posts: 915
Registered: 17-5-2015
Location: The Other Place
Member Is Offline

Mood: Cyclic

[*] posted on 20-11-2019 at 14:29


3-phenylpropanal literature search
https://www.sciencemadness.org/whisper/files.php?pid=501805&...


/CJ




Being well adjusted to a sick society is no measure of one's mental health
View user's profile View All Posts By User
finetune
Harmless
*




Posts: 14
Registered: 8-10-2019
Member Is Offline


[*] posted on 20-11-2019 at 15:08


Forum response on opening the link:
"Sorry, you are not permitted to view this forum"

Why is that?
View user's profile View All Posts By User
Corrosive Joeseph
National Hazard
****




Posts: 915
Registered: 17-5-2015
Location: The Other Place
Member Is Offline

Mood: Cyclic

[*] posted on 20-11-2019 at 15:22


Oops, you need access to References and whimsy....... But I should have known that. (facepalm)
Here it is again - https://ufile.io/9oxr29k4


/CJ




Being well adjusted to a sick society is no measure of one's mental health
View user's profile View All Posts By User
S.C. Wack
bibliomaster
*****




Posts: 2419
Registered: 7-5-2004
Location: Cornworld, Central USA
Member Is Offline

Mood: Enhanced

[*] posted on 20-11-2019 at 18:15


NaBH4 is the preferred way to make Pd catalysts. And Pt, and Ni...but in this case...Pd.



"You're going to be all right, kid...Everything's under control." Yossarian, to Snowden
View user's profile Visit user's homepage View All Posts By User

  Go To Top