Sciencemadness Discussion Board
Not logged in [Login ]
Go To Bottom

Printable Version  
Author: Subject: ETN synthesis without H2SO4
Mikhail01
Harmless
*




Posts: 4
Registered: 23-10-2019
Member Is Offline


[*] posted on 29-12-2019 at 13:22
ETN synthesis without H2SO4


Have any of you tried nitrating erythritol with only 100% HNO3?
Some nitrations have to be performed without H2SO4, such as RDX... and as far as i know it is possible to nitrate certain polyols like mannitol, glycerine with great yield (using only WFNA)... can the same be applied to erythritol, and if so, do any of you have some experience or a synthesis?
View user's profile View All Posts By User
Pyro_cat
Hazard to Others
***




Posts: 243
Registered: 30-4-2018
Member Is Offline

Mood: No Mood

[*] posted on 30-12-2019 at 19:51


From what I have read I think I remember that the H2SO4 is needed to pull out the water.

Is 100% nitric acid is that even possible outside a high end lab ?

Distilling nitric is not something I have experimented with yet.

See what happens if I get back into mastering nitrocellulose.
View user's profile View All Posts By User
Vosoryx
National Hazard
****




Posts: 282
Registered: 18-6-2017
Location: British Columbia, Canada
Member Is Offline

Mood: Serial Apple Enjoyer

[*] posted on 30-12-2019 at 19:57


if you can get WFNA. but i cant think of a way to WFNA without using H2SO4 in the first place.



"Open your mind son, before someone opens it for you." - Dr. Walter Bishop
View user's profile View All Posts By User
Mikhail01
Harmless
*




Posts: 4
Registered: 23-10-2019
Member Is Offline


[*] posted on 31-12-2019 at 15:11


Quote: Originally posted by Pyro_cat  
From what I have read I think I remember that the H2SO4 is needed to pull out the water.

Is 100% nitric acid is that even possible outside a high end lab ?

You can distill the weak nitric acid to pretty close to 100% with the help of some concentrated H2SO4. I think you could make RDX even with less than 99% concentrated nitric acid but with great loss of yield...

Quote: Originally posted by Vosoryx  
if you can get WFNA. but i cant think of a way to WFNA without using H2SO4 in the first place.

Yes, the whole process has to involve H2SO4 either directly or indirectly, i was just curious about if someone has ever tried synthesizing ETN with only WFNA, i was curious about the possible yields...

I don't really want this thread to turn into an argument about costs or ease of acquiring reagents. Yes, i know you can obtain sulfuric acid relatively easily nowadays, but i'd like to add that even though you need H2SO4 to distill the weak HNO3 you can recycle it (with a bit of loss of sulfuric acid) so in the end, if one had a cheap source of HNO3 (Birkeland-Eyde process comes to mind, which might be even cheaper than buying actual lab grade HNO3 for some people, although time consuming-) and a proper distillation apparatus you could -almost- forget about the valuable sulfuric acid. It should be noted that sulfuric acid will likely be forbidden or strictly regulated in coming years, specially in the EU, and making nitric acid is easier than making sulfuric acid (you only need air, water and energy).

Looks like no one has tried it, so i will probably do it myself in the not so far future and report back, for the sake of it.

[Edited on 31-12-2019 by Mikhail01]
View user's profile View All Posts By User
underground
International Hazard
*****




Posts: 574
Registered: 10-10-2013
Location: Europe
Member Is Offline


[*] posted on 31-12-2019 at 16:24


It is actually working. I have seen a patent (don't remember which one exactly) that PETN has been made with FNA with almost 100% yields, so i am pretty sure it is working for ETN too. I would though make PETN or RDX with FNA.

[Edited on 1-1-2020 by underground]
View user's profile View All Posts By User
Microtek
International Hazard
*****




Posts: 550
Registered: 23-9-2002
Member Is Offline

Mood: No Mood

[*] posted on 2-1-2020 at 05:22


Whenever I have made PETN, I have always used WFNA (and no sulfuric). The yields are better, and the product is easier to purify (and it is more economical since the sulfuric that was used to concentrate the nitric in the first place can be reconcentrated and reused indefinitely). I'm sure that a similar process could be used for ETN.
Nitric acid can be concentrated using Mg(NO3)2 instead of sulfuric for breaking the azeotrope, though I don't think it is practical on the lab scale.
View user's profile View All Posts By User
Yamato71
Hazard to Self
**




Posts: 58
Registered: 8-2-2012
Member Is Offline

Mood: No Mood

[*] posted on 30-1-2021 at 20:45


33 ml of WFNA will esterify 10 g of pentaerythritol with excellent yields without the need for SA. It has been decades, but IIRC, PETN yields were consistently in the 20+ gram range. I assume that this works because nitric acid forms a 68/32% azeotrope with water. !00% nitric acid sequesters the water produced by the esterification just as sulfuric acid would, driving the reaction forward, until the acid concentration reaches 68%. This method has the added advantage of producing far less heat since SA isn't being hydrated.
View user's profile View All Posts By User
Fyndium
International Hazard
*****




Posts: 1131
Registered: 12-7-2020
Location: Not in USA
Member Is Offline


[*] posted on 31-1-2021 at 06:44


The economics favor the use of pure nitric acid instead of double acid, and apparently it gives also favorable yields.

The HNO3 can be generated without sulfuric acid. The sulfuric acid used to dehydrate and distill WFNA can be regenerated with effort. Nurdrage experimented if some nitrate salts can be used as dehydrating agents.

Has anyone got synthesis description on their WFNA nitration process for ETN/PETN with observations about the process kinetics? Microtek?
View user's profile View All Posts By User
fredsci93
Harmless
*




Posts: 19
Registered: 29-12-2017
Member Is Offline

Mood: No Mood

[*] posted on 23-3-2021 at 21:40


Not to be discouraging, I understand the reasoning for using FNA instead of sulphuric/AN however ETN yields via this (AN/H2SO4) process for me have been >~95% after purification, so even if it is more economical it cannot be any better than the conventional method, that being said ETN is an easy compound so I would not be surprised if FNA (yellow or white) would give yields ~95%. Just wanted to defend the current method as it's already perfect in my eyes :D

[Edited on 24-3-2021 by fredsci93]
View user's profile View All Posts By User
Etanol
Harmless
*




Posts: 31
Registered: 27-2-2012
Member Is Offline

Mood: No Mood

[*] posted on 24-3-2021 at 11:57


Quote: Originally posted by Microtek  

Nitric acid can be concentrated using Mg(NO3)2 instead of sulfuric for breaking the azeotrope, though I don't think it is practical on the lab scale.

It is work. I prepared 92% HNO3 with Mg(NO3)2*H2O and 86% HNO3 with Ca(NO3)2 from 70% HNO3. Concentration is of more 95% after the second distillation.
View user's profile View All Posts By User

  Go To Top