wessonsmith
Hazard to Others
Posts: 203
Registered: 15-2-2018
Location: elsewhere
Member Is Offline
|
|
What wessonsmith is working on.
1) Nickel Hydrazine Nitrate (NHN) - Dextrinated
How-to video- step by step process
https://youtu.be/rPxdDSUGxo4
2) Cardboard #8 power detonator based on NHN as the primary
*** DO NOT ATTEMPT THIS METHOD WITH ANY PRIMARY OTHER THAN NHN ***
How-to video
https://youtu.be/6P4yiN_A-o4
Power test
https://youtu.be/BzCQxxl_dw0
3) Thermobaric (enhanced blast) plastic
*ETN 55.00%
Al(3μm/) 12.00%
Mg/Al(44μm/325mesh) 18.00%
Soy Lecithin(liquid) 0.30%
HTPB Resin 11.70%
Isodecyl Pelargonate Plasticizer 0.74%
Modified MDI Isocyanate Curative 1.84%
CAO-5 Antioxidant 0.44%
* If you don't use the positive OB% of ETN then you will need to adjust the formula as follows: 45% PETN or RDX and 10% Ammonium Perchlorate.
Thermobaric / NHN comparison video
https://youtu.be/aF3s5UIgMdY
4) Plastic based on ETN/NHN/Lithium Grease: UPDATED
67% ETN average particle size 220 µm
18% NHN average particle size 13 µm
15% Lithium Grease (Super Tech General Purpose Lithium Grease)
Power test / demonstration video
https://youtu.be/ZWfAZgSxsCI
|
|
|
wessonsmith
Hazard to Others
Posts: 203
Registered: 15-2-2018
Location: elsewhere
Member Is Offline
|
|
Energetics Documents
I have assembled a bunch of reading material that I have found useful.
https://drive.google.com/open?id=1MghARjFF35BnV4ZhMJKGKtrOYR...
|
|
|
ShotBored
Hazard to Others
Posts: 124
Registered: 19-5-2017
Location: Germany
Member Is Offline
Mood: No Mood
|
|
Your how-to video was fantastic, I was pretty pissed I only got to watch it once before it got removed....
|
|
|
MineMan
National Hazard
Posts: 996
Registered: 29-3-2015
Member Is Offline
Mood: No Mood
|
|
Great work Wesson! Be safe, it’s a very unique hobby!
Also. Check out energetic heretics videos on YT if you haven’t. Really interesting compounds.
|
|
|
wessonsmith
Hazard to Others
Posts: 203
Registered: 15-2-2018
Location: elsewhere
Member Is Offline
|
|
Thanks.
Which video, in particular, do you want back up?
|
|
|
wessonsmith
Hazard to Others
Posts: 203
Registered: 15-2-2018
Location: elsewhere
Member Is Offline
|
|
Quote: Originally posted by MineMan  | Great work Wesson! Be safe, it’s a very unique hobby!
Also. Check out energetic heretics videos on YT if you haven’t. Really interesting compounds. |
Thanks.
[Edited on 29-2-2020 by wessonsmith]
|
|
|
twelti
Hazard to Others
Posts: 217
Registered: 20-2-2019
Member Is Offline
|
|
Curious about the NHN. Would it detonate if you put a small amount on a metal plate and gave it a rap with a standard sized hammer? What about
moderate grinding? I know this isn't the most scientific test but just curious.
|
|
|
wessonsmith
Hazard to Others
Posts: 203
Registered: 15-2-2018
Location: elsewhere
Member Is Offline
|
|
| Quote: Originally posted by twelti | | Curious about the NHN. Would it detonate if you put a small amount on a metal plate and gave it a rap with a standard sized hammer? What about
moderate grinding? I know this isn't the most scientific test but just curious. |
A solid rap with a hammer against a hard surface, yes. Moderate grinding, no.
Here is a paper testing various Hydrazine complexes of transition metals, including NHN.
https://pdfs.semanticscholar.org/7ed5/24109f55815dc81cf1e7c3...
|
|
|
dave321
Harmless
Posts: 45
Registered: 22-11-2012
Member Is Offline
Mood: No Mood
|
|
wesson,
i would not like to hear that you had an accident with the above procedure.
although nhn may not be particularly sensitive to friction , the material underneath it,
is melt cast etn, which is i understand very sensitive to shock.
surely there is a risk of you pounding the wooden rammar (to compress
the nhn) and potentially setting of the melt cast etn.?
stay safe
|
|
|
wessonsmith
Hazard to Others
Posts: 203
Registered: 15-2-2018
Location: elsewhere
Member Is Offline
|
|
| Quote: Originally posted by dave321 | wesson,
i would not like to hear that you had an accident with the above procedure.
although nhn may not be particularly sensitive to friction , the material underneath it,
is melt cast etn, which is i understand very sensitive to shock.
surely there is a risk of you pounding the wooden rammar (to compress
the nhn) and potentially setting of the melt cast etn.?
stay safe |
I appreciate your concern. Melt-cast ETN is less sensitive to shock than powdered ETN it's nearly as insensitive to shock as PETN, 96% of PETN. ETN
in the MOLTEN state is VERY sensitive and shouldn't be confused with melt-cast.
If you watch my video, I am not pounding anything. I am pressing down on the material. The reason I am using a waxed paper tube and a soft wooden
dowel is to both eliminate friction and shock danger.
When I do use metal tubes, my setup is completely different. Even then, the risk of detonation pressing into a metal tube is very low, BUT because
its metal the risk of being blinded by flying shrapnel requires extra special care. I can tell you this if I didn't have NHN I wouldn't be making
detonators AT ALL. The amount of special equipment you would need to SAFELY make detonators using anything else wouldn't be worth it for the casual
experimenter like me.
[Edited on 1-3-2020 by wessonsmith]
|
|
|
ShotBored
Hazard to Others
Posts: 124
Registered: 19-5-2017
Location: Germany
Member Is Offline
Mood: No Mood
|
|
All of them were good, but the NHN synthesis video itself was very well done and easy to follow
|
|
|
wessonsmith
Hazard to Others
Posts: 203
Registered: 15-2-2018
Location: elsewhere
Member Is Offline
|
|
Thanks. It's back up.
|
|
|
Johnny Windchimes
Hazard to Self
Posts: 61
Registered: 28-5-2019
Member Is Offline
Mood: Sorry, it's my chimes~!
|
|
Neat stuff!
Are your videos on bitchute? A bit of a reduced listing on Youtube for semi-obvious reasons currently....
|
|
|
wessonsmith
Hazard to Others
Posts: 203
Registered: 15-2-2018
Location: elsewhere
Member Is Offline
|
|
Taking videos down is the way I stay under the radar, regardless of the platform. Anytime I see a video I like that I know the powers that be
wouldn't, I download them
|
|
|
Mikhail01
Harmless
Posts: 4
Registered: 23-10-2019
Member Is Offline
|
|
What do you think about using Liptakov's CHP instead of NHN?
It looks like a reasonable alternative... pretty insensitive, non-toxic, powerful and safe to manufacture (unlike NHN synthesis which involves
hydrazine)...
https://youtu.be/ZV9Pv3Jdtak
By the way, i really appreciate what you're doing around here, it's a pity this place is a bit dead (no pun intended).
|
|
|
wessonsmith
Hazard to Others
Posts: 203
Registered: 15-2-2018
Location: elsewhere
Member Is Offline
|
|
| Quote: Originally posted by Mikhail01 | What do you think about using Liptakov's CHP instead of NHN?
It looks like a reasonable alternative... pretty insensitive, non-toxic, powerful and safe to manufacture (unlike NHN synthesis which involves
hydrazine)...
https://youtu.be/ZV9Pv3Jdtak
By the way, i really appreciate what you're doing around here, it's a pity this place is a bit dead (no pun intended). |
CHP is an excellent alternative. The main caveat is the need for strong confinement. I am also uncertain as to the shelflife of CHP and any
reactivity issues it might have. As for the dangers associated with using Hydrazine Monohydrate, they are absolutely a SERIOUS concern, however, they
are also easily addressed by using proper safety gear.
If you are going to synthesis powerful energetics, you are going to be around some VERY dangerous chemicals. So safety is paramount. I like NHN
because I can use paper detonators which eliminate any shrapnel concern.
Thanks for the encouragement, you are correct, this board has died off.
|
|
|
monolithic
Hazard to Others
Posts: 435
Registered: 5-3-2018
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by Mikhail01 | What do you think about using Liptakov's CHP instead of NHN?
It looks like a reasonable alternative... pretty insensitive, non-toxic, powerful and safe to manufacture (unlike NHN synthesis which involves
hydrazine)...
https://youtu.be/ZV9Pv3Jdtak
By the way, i really appreciate what you're doing around here, it's a pity this place is a bit dead (no pun intended). |
What ever happened to Liptakov?
|
|
|
wessonsmith
Hazard to Others
Posts: 203
Registered: 15-2-2018
Location: elsewhere
Member Is Offline
|
|
| Quote: Originally posted by monolithic | | Quote: Originally posted by Mikhail01 | What do you think about using Liptakov's CHP instead of NHN?
It looks like a reasonable alternative... pretty insensitive, non-toxic, powerful and safe to manufacture (unlike NHN synthesis which involves
hydrazine)...
https://youtu.be/ZV9Pv3Jdtak
By the way, i really appreciate what you're doing around here, it's a pity this place is a bit dead (no pun intended). |
What ever happened to Liptakov? |
The last time he posted was in Sept. He must be busy with real-world stuff He
is/was one of the few posters on this forum that I have a lot of respect for.
|
|
|
MineMan
National Hazard
Posts: 996
Registered: 29-3-2015
Member Is Offline
Mood: No Mood
|
|
Ahhh. LL, truly one of my favorite posters. And PHILOU of course too! I wish both of those the best happiest life... they deserve super models.
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
