Petn1933
Hazard to Others
Posts: 106
Registered: 16-9-2019
Member Is Offline
|
|
My new blasting machine 2
this is my new electric blasting machine!
Medium power.
Firing Voltage: 270 VDC Maximum
Firing Energy: 4.2 Joule (w/s)
Power Source: 6v,4AA battery
Charge time:about 5s.
Compact and useful device.
 
|
|
|
Rainwater
National Hazard
Posts: 798
Registered: 22-12-2021
Member Is Offline
Mood: indisposition to activity
|
|
I love the size. Mines as big as a shoe box and has 6 heavy d cells in side. Use it for cadweld charges and the occasional trench blast. Got a little
use a few days ago with the new years.
"You can't do that" - challenge accepted
|
|
|
specialactivitieSK
Hazard to Self
Posts: 94
Registered: 21-10-2014
Member Is Offline
Mood: No Mood
|
|
New toy VOPIL M524
 
|
|
|
specialactivitieSK
Hazard to Self
Posts: 94
Registered: 21-10-2014
Member Is Offline
Mood: No Mood
|
|
Upgrade
 
|
|
|
Mateo_swe
National Hazard
Posts: 501
Registered: 24-8-2019
Location: Within EU
Member Is Offline
|
|
I guess the guts of these contain some very low resistance, high energy caps and a charging circuit.
And some bleed resistors to remove the energy if left alone for a while, disarming the device.
Are there any DIY variants of this sort of device one can build?
I have some electronic skills but would prefer to start with a proven design compared to develop something from scratch.
|
|
|
Petn1933
Hazard to Others
Posts: 106
Registered: 16-9-2019
Member Is Offline
|
|
Quote: Originally posted by Mateo_swe  | I guess the guts of these contain some very low resistance, high energy caps and a charging circuit.
And some bleed resistors to remove the energy if left alone for a while, disarming the device.
Are there any DIY variants of this sort of device one can build?
I have some electronic skills but would prefer to start with a proven design compared to develop something from scratch. |
in my opinion ; You can use the flash charging circuit of disposable cameras as a basic idea.
In Google, the schematics of those circuits are available.
As someone who has worked with standard military examples of these devices; The basic idea of all of them is like the charging circuit of disposable
cameras.
Good luck
|
|
|
Mateo_swe
National Hazard
Posts: 501
Registered: 24-8-2019
Location: Within EU
Member Is Offline
|
|
That is probably a good idea to try.
Those flash caps in one-time cameras are pretty powerful, i have played around with them long ago.
If not enough power several caps can be used.
I guess it depends on how long cable one wants to use to the e-match or similar.
Some remote wireless triggering signal would be nice, then just a short cable from the explosive to the DIY device would be needed.
Also, in the the one-time cameras there is a trigger coil that can be used to trigger the discharge of the caps.
The main thing must be to make it absolutely safe, so it doesnt accidently trigger somehow.
Maybe a mecanical pin that needs to be removed by a thin rope, but it kind of ruins the wireless triggering.
A long cable is probably better and safer.
[Edited on 2022-10-14 by Mateo_swe]
|
|
|
Sir_Gawain
Hazard to Others
Posts: 267
Registered: 12-10-2022
Location: Due South of Due West
Member Is Offline
Mood: Yes.
|
|
I have not had much luck with photoflash capacitors, but a microwave oven capacitor charged to 4kv will detonate ETN every time.
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
