SnailsAttack
Hazard to Others
Posts: 163
Registered: 7-2-2022
Location: The bottom of Lake Ontario
Member Is Offline
|
|
Why does vinegar only react with certain metal oxides?
Is there an explanation as to why 5% vinegar reacts with some metal oxides but not others? I've found that it dissolves zinc oxide readily, but not
iron(III) oxide or manganese(II,III) oxide. Why? Copper(II) oxide also reacts with vinegar but very very slowly.
|
|
|
macckone
International Hazard
Posts: 2159
Registered: 1-3-2013
Location: Over a mile high
Member Is Offline
Mood: Electrical
|
|
It depends on the enthalpy of formation and solvation.
Even chromium (III) oxide will eventually dissolve in 5% acetic acid.
You may not live long enough to observe it, but it happens.
All acetates are soluble but a lot of oxides are not which slows things down.
|
|
|
Texium
Administrator
Posts: 4508
Registered: 11-1-2014
Location: Salt Lake City
Member Is Offline
Mood: PhD candidate!
|
|
A more practical consideration is the surface area and physical structure of the metal oxide, which is largely determined by how it was prepared. Many
metal oxides, especially those used in pottery, are calcined. This means they are heated to extremely high temperatures, which improves their
stability in ceramics, but ruins their reactivity towards acids. Essentially, calcination increases particle size and drastically decreases the
surface area of the particles. This can often make them quite inert to anything but fusion with molten alkali.
See here for a paper that discusses calcination temperature vs surface area and particle size for various metal oxides: https://www.researchgate.net/profile/Wanazelee-Bakar/publica...
[Edited on 7-11-2022 by Texium]
|
|
|
CharlieA
National Hazard
Posts: 645
Registered: 11-8-2015
Location: Missouri, USA
Member Is Offline
Mood: No Mood
|
|
Absent physical changes to the surface, say though calcining, doesn't the activity series of metals play a part in this?
|
|
|
Texium
Administrator
Posts: 4508
Registered: 11-1-2014
Location: Salt Lake City
Member Is Offline
Mood: PhD candidate!
|
|
Nope. If you have copper(II) oxide and dissolve it in HCl to make copper(II) chloride, there’s no redox reaction happening, so activity series is
irrelevant. Reducing oxides to their metals is a different story.
|
|
|
teodor
National Hazard
Posts: 872
Registered: 28-6-2019
Location: Heerenveen
Member Is Offline
|
|
At room temperature acetic acid exists mainly as a dimer, two carboxyl groups are connected via hydrogen bonding. Some solutes can break this dimer
others are incapable of doing so.
Also among acetates probably only some alkali and alkali earths are ionic. Other salts are more or less covalent (Co, Li), has polymeric structure
(some forms of Cu acetate), or chelate complexes (Cu, Cr, Zn, UO2 ...). This makes this family rather complex and does not always behave as the acid +
oxide = normal salt.
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
