bluamine
Hazard to Others
Posts: 196
Registered: 17-8-2015
Member Is Offline
Mood: No Mood
|
|
sodium permanganate
Hi everyone!
Guys who worked with sodium permanganate before?
Is it a good alternative fo potassium permanganate?
|
|
|
Tsjerk
International Hazard
Posts: 3022
Registered: 20-4-2005
Location: Netherlands
Member Is Offline
Mood: Mood
|
|
It is a fine alternative for KMnO4 as long as you can keep it dry, as it is hygroscopic.
|
|
|
bluamine
Hazard to Others
Posts: 196
Registered: 17-8-2015
Member Is Offline
Mood: No Mood
|
|
Well that's obvious and I guess it's similar to many sodium salts that are more hygroscopic than their respective potassium cautions like
sodium/potassium nitrate.. Doesn't the hydrated form work as fine as the pre-dried form in an aqueous solution??!!
[Edited on 13-7-2022 by bluamine]
|
|
|
violet sin
International Hazard
Posts: 1475
Registered: 2-9-2012
Location: Daydreaming of uraninite...
Member Is Offline
Mood: Good
|
|
I'd assume it would be fine to use hydrated material in an aqueous solution, but I've been wrong before. The headache I see is weighing the proper
amount. You'd be guessing at the hydration level, so hopefully it's not super touchy about stoichiometry.
All seems straight forward, what kind of interactions would you imagine it would not work for? I mean if it's going into a pyro powder, that would
not be fun.
|
|
|
woelen
Super Administrator
Posts: 7976
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
I do not see it as a suitable alternative. I purchased NaMnO4 some years ago, but the material has decomposed. I now have an alkaline mix of MnO2,
sodium oxide/hydroxide and probably some sodium carbonate as well. There still is some NaMnO4 in the mix, but I think more than half of it has
decomposed.
On the other hand, KMnO4 is stable indefinitely. I still have some KMnO4, which I purchased more than 35 years ago, and it is as if I purchased it
yesterday. A nice dry crystalline solid.
I bought my NaMnO4, because I had the opportunity (it is amazingly hard to get your hands on). It can be used to make much more concentrated solutions
of permanganate, and it allows you to make other less soluble permanganates (e.g. ammonium permanganate, silver permanganate), but if you get some,
then you should use it quickly.
|
|
|
Keras
National Hazard
Posts: 766
Registered: 20-8-2018
Location: (48, 2)
Member Is Online
|
|
An another advantage of sodium salts is that you get more bang for your bucks, since the molar mass is less…
|
|
|
bluamine
Hazard to Others
Posts: 196
Registered: 17-8-2015
Member Is Offline
Mood: No Mood
|
|
Well, if it would take years to decompose, it would be just fine..
I guess you can remake it using sodium hypochlorite solution which may convert MnO2/NaOH mixture to NaMnO4, but you will have to separate NaCl then..
I have no idea how to do it since organic solvents can't be used to percepitate sodium chloride out..
I want to make some ethylene glycol, so I guess it would help me to make a concentrated and cold solution. I think also I'd better use it instead of
potassium permanganate because I won't need to recycle sodium sulfate
Quote: Originally posted by Keras  | | An another advantage of sodium salts is that you get more bang for your bucks, since the molar mass is less… |
Yes that's one reason I want to use it for
|
|
|
Texium
Administrator
Posts: 4508
Registered: 11-1-2014
Location: Salt Lake City
Member Is Offline
Mood: PhD candidate!
|
|
| Quote: Originally posted by Keras | | An another advantage of sodium salts is that you get more bang for your bucks, since the molar mass is less… |
Except that you actually don’t, since NaMnO4 tends to be a lot more expensive than KMnO4, and you have to use it up before it
turns into permanganate soup and/or degrades.
Can you not get ethylene glycol based antifreeze where you live? Here it’s about $12 for a gallon/3.8 liters that just needs to be
distilled to remove dye and corrosion inhibitors.
[Edited on 7-14-2022 by Texium]
|
|
|
Fantasma4500
International Hazard
Posts: 1677
Registered: 12-12-2012
Location: Dysrope (aka europe)
Member Is Offline
Mood: dangerously practical
|
|
well one advantage manganate has over permanganate, is that manganate is doable to make melting NaOH with MnO2, were still struggling to make KMnO4
K2MnO4 would also be doable in similar fashion
|
|
|
Keras
National Hazard
Posts: 766
Registered: 20-8-2018
Location: (48, 2)
Member Is Online
|
|
| Quote: Originally posted by Texium | | Except that you actually don’t, since NaMnO4 tends to be a lot more expensive than KMnO4, and you have to use it up before it turns into
permanganate soup and/or degrades. |
Can’t you turn NaMnO₄ into KMnO₄ by mixing it with KCl or KOH, for example? Ok, that has nothing to do with the price, just wondering.
|
|
|
bluamine
Hazard to Others
Posts: 196
Registered: 17-8-2015
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by Texium | Can you not get ethylene glycol based antifreeze where you live? Here it’s about $12 for a gallon/3.8 liters that just needs to be distilled to
remove dye and corrosion inhibitors.
[Edited on 7-14-2022 by Texium] |
I got some before, but since the commercial product contains other various other chemicals i guess it'd be a bad idea to extract it from antifreeze
|
|
|
bluamine
Hazard to Others
Posts: 196
Registered: 17-8-2015
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by Keras |
Can’t you turn NaMnO₄ into KMnO₄ by mixing it with KCl or KOH, for example? Ok, that has nothing to do with the price, just wondering.
|
Well theotically you can, but how would you seperate substances since all of them are water soluble, and you likely can't use any organic solvents
because they will react with permanganate ions
|
|
|
Keras
National Hazard
Posts: 766
Registered: 20-8-2018
Location: (48, 2)
Member Is Online
|
|
| Quote: Originally posted by bluamine |
Well theotically you can, but how would you seperate substances since all of them are water soluble, and you likely can't use any organic solvents
because they will react with permanganate ions |
Solubility is readily different: I read 900 g/L for sodium permanganate (!) vs 76 g/L for potassium permanganate, which is not even the tenth. Under
those conditions, any well-conducted recrystallisation should give you almost pure KMnO₄.
|
|
|
bluamine
Hazard to Others
Posts: 196
Registered: 17-8-2015
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by Keras |
Solubility is readily different: I read 900 g/L for sodium permanganate (!) vs 76 g/L for potassium permanganate, which is not even the tenth. Under
those conditions, any well-conducted recrystallisation should give you almost pure KMnO₄. |
I know KMnO4 wouldn't be a problem since it's not very soluble,by I guess one should consider other salts, like NaOH & NaCl which is very soluble
(NaCl: 316g/l if I'm not wrong)
|
|
|
draculic acid69
International Hazard
Posts: 1371
Registered: 2-8-2018
Member Is Offline
|
|
Unless you are using it for a specialised synthesis I don't see how it would benefit you.
Sounds like reinventing the wheel to me just to arrive at ethylene glycol.
If it's about the journey I get it but if it's not then you should just distill the radiator coolant
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
