Yttrium2
Perpetual Question Machine
Posts: 1104
Registered: 7-2-2015
Member Is Offline
|
|
Hydrochloric acid 32%
Should it be yellowish green or clear?
|
|
|
Gammatron
Hazard to Others
Posts: 125
Registered: 30-8-2022
Location: Abandoned Uranium Mines
Member Is Offline
|
|
If you're talking about hardware store acid, it is yellow because it's contaminated, iron I believe. Pure HCl is clear.
|
|
|
Keras
National Hazard
Posts: 768
Registered: 20-8-2018
Location: (48, 2)
Member Is Offline
|
|
32% hydrochloric acid is clear. If yours turns yellowish, just add a crystal of sodium thiosulphate, it should clear up immediately.
|
|
|
Tsjerk
International Hazard
Posts: 3022
Registered: 20-4-2005
Location: Netherlands
Member Is Offline
Mood: Mood
|
|
Quote: Originally posted by Keras  | | 32% hydrochloric acid is clear. If yours turns yellowish, just add a crystal of sodium thiosulphate, it should clear up immediately.
|
What does thiosulfate do?
|
|
|
Keras
National Hazard
Posts: 768
Registered: 20-8-2018
Location: (48, 2)
Member Is Offline
|
|
It reduces Cl₂ to Cl⁻. I suppose the yellow colouration is caused by dissolved Cl₂.
|
|
|
Bedlasky
International Hazard
Posts: 1219
Registered: 15-4-2019
Location: Period 5, group 6
Member Is Offline
Mood: Volatile
|
|
Hardware store HCl is usually contaminated with iron. Yellow is from Fe3+ ions, not from chlorine.
|
|
|
unionised
International Hazard
Posts: 5102
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
Reduction of Fe(III) to Fe(II) will remove the colour.
|
|
|
Bedlasky
International Hazard
Posts: 1219
Registered: 15-4-2019
Location: Period 5, group 6
Member Is Offline
Mood: Volatile
|
|
Yeah, but iron is still there. You introduce more contamination by reducing agent.
|
|
|
j_sum1
Administrator
Posts: 6218
Registered: 4-10-2014
Location: Unmoved
Member Is Offline
Mood: Organised
|
|
Distillation is the way to go.
I have found that addition of water and azeotropic distillation of my hardware store HCl has been extremely helpful. I get a non-fuming product. It
is consistently clean. The concentration is pretty consistent at 20.2%. It is useful for most purposes. And on the occasions when I do need
something stronger (which is actually not that often), I can always concentrate it by bubbling some gaseous HCl through it.
Iron is not the only possible contaminant btw. Around here I have had a few purchases of HCl that were very low in iron but contained titanium (of
all things).
[edit]
I will add, it is not advisable to distil to dryness. Or even close. There can be a surprising amount of rubbish in here. And my experience is that
it is difficult to get the flask clean again.
[Edited on 3-10-2022 by j_sum1]
|
|
|
Mateo_swe
National Hazard
Posts: 505
Registered: 24-8-2019
Location: Within EU
Member Is Offline
|
|
I have bought some about 32% HCL several years ago and it was clear when i purchased it.
But after many years now it has got a slightly yellowish color after long storage.
I see many new batches at the store got same slightly yellowish color and i think its because of long storage.
|
|
|
chornedsnorkack
National Hazard
Posts: 521
Registered: 16-2-2012
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by Mateo_swe | I have bought some about 32% HCL several years ago and it was clear when i purchased it.
But after many years now it has got a slightly yellowish color after long storage.
I see many new batches at the store got same slightly yellowish color and i think its because of long storage. |
Maybe it is because it originally had (weakly coloured) FeCl2 impurity, which slowly oxidized into (strongly coloured) FeCl3 impurity?
Other colourless impurities which might slowly oxidize into yellowish ones would include HI and HBr.
Also: FeCl2 and FeCl3 are not volatile on the distillation of HCl (in the region of up to 110 C). HBr, HI and Br2 are. I2 less so, but more than
FeCl3.
[Edited on 5-10-2022 by chornedsnorkack]
[Edited on 5-10-2022 by chornedsnorkack]
|
|
|
Rainwater
National Hazard
Posts: 799
Registered: 22-12-2021
Member Is Offline
Mood: indisposition to activity
|
|
By placing a container of dirty hcl, next to a container of 1/2 volume h2o, all inside a sealed container. The water will draw out the hcl, for 500ml
it takes about a 24hours at 25c, longer when cold. Density shows about 20%
"You can't do that" - challenge accepted
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
