Sciencemadness Discussion Board
Not logged in [Login ]
Go To Bottom

Printable Version  
Author: Subject: K2CO3 : is it moisture or melting ?
metalresearcher
National Hazard
****




Posts: 819
Registered: 7-9-2010
Member Is Offline

Mood: Reactive

[*] posted on 3-10-2025 at 10:33
K2CO3 : is it moisture or melting ?


Probably the latter, I pointed a pyrometer to it (blurred in the video as too close) and saw 800 C which is close to its mp of 891 C.
I was wondering that the K2CO3 attracted that much moisture, but the 'moisture' was actually liquid K2CO3.

https://vlix.io/video/e572c2c5edc4f5bef039/

[Edited on 2025-10-3 by metalresearcher]
View user's profile View All Posts By User
RU_KLO
Hazard to Others
***




Posts: 313
Registered: 12-10-2022
Location: Argentina
Member Is Offline


[*] posted on 9-10-2025 at 11:17


hi,
From this:

The melting point of K2CO3, as measured by DTA, is 905°C in CO2 and 900°C in N2.

Of the many compounds that exist in the comprehensive K±H±C±O system, four anhydrous compounds, K2O, KHCO3, KOH, and K2CO3 are of principal interest under ordinary ambient environments. Potassium hydrogen arbonate, KHCO3, forms under certain conditions of H2O and CO2 partial
pressures, but it decomposes rapidly between 1008 and 2008C. Potassium hydroxide, KOH, which forms under conditions of suf®cient moisture and low CO2 partial pressure, melts at 360ºC and boils at 1316ºC. K2CO3 occurs in two forms, g and b. The g phase transforms to the b form at 421ºC and the b form is stable up to the melting point, near 900ºC.

Thermal stability of potassium carbonate near its melting point
Richard L. Lehmana,*, Jefffery S. Gentry1b, Nick G. Glumaca
a Rutgers University, Piscataway, NJ 08855, USA b RJ Reynolds, Inc., Winston-Salem, NC 27102, USA


Maybe some carbonate transformed into KOH and there was some water.



Attachment: s0040-60312900289-5.pdf (226kB)
This file has been downloaded 239 times





Go SAFE, because stupidity and bad Luck exist.
View user's profile View All Posts By User

  Go To Top