metalresearcher
National Hazard
Posts: 731
Registered: 7-9-2010
Member Is Offline
Mood: Reactive
|
|
No F2 in element webshops : why ?
On several webshops like www.elementsales.com or www.smart-elements.com samples of evenry element till 83 (Bi) are available, except Tc and Pm which are too radioactive. Obvious. But wat also
lacks is Fluorine. Yes I know it is too reactive to put it into a sealed glass ampoule, it would attack the glass. The same with PMMA or Lexan.
But why not in transparent Teflon ? That is inert to F2 gas.
[Edited on 2011-5-31 by metalresearcher]
|
|
|
hissingnoise
International Hazard
Posts: 3940
Registered: 26-12-2002
Member Is Offline
Mood: Pulverulescent!
|
|
Translucent teflon, yes, but I don't think it gets anywhere near as transparent as glass!
And I'd be surprised if there's any material that will contain it indefinitely . . .
|
|
|
woelen
Super Administrator
Posts: 7976
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
Some years ago smart-elements sold a sample of F2 in a quartz ampoule. One part of F2 was mixed with 2 parts of an inert gas and this mix was sealed
in the quartz tube. The gas mix had a very faint yellowish/brown color. This sample was outrageously expensive (EUR 300) and I wonder how long such a
sample will last.
|
|
|
hissingnoise
International Hazard
Posts: 3940
Registered: 26-12-2002
Member Is Offline
Mood: Pulverulescent!
|
|
Wiki says this about containment . . .
|
|
|
The WiZard is In
International Hazard
Posts: 1617
Registered: 3-4-2010
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by metalresearcher  | On several webshops like www.elementsales.com or www.smart-elements.com samples of evenry element till 83 (Bi) are available, except Tc and Pm which are too radioactive. Obvious. But wat also
lacks is Fluorine. Yes I know it is too reactive to put it into a sealed glass ampoule, it would attack the glass. The same with PMMA or Lexan.
But why not in transparent Teflon ? That is inert to F2 gas. |
Fluorine's cousin.
7. The permeability of glass to iodine and bromine vapours.
James Brierley Firth. Jour. Chem. Soc. Lond., 117, 1602-3 (1920).
—Iodine and bromine do not diffuse through glass under ordinary
experimental conditions. Only in extreme cases is there a
possibility of such diffusion. After a period of nine and one-half
years, iodine was found to have passed through a glass bulb 0.208
mm. thick. The bulb was heated to 360 °C for 100 days during the
experiment. In this experiment the bulb was placed in a large tube
and both tube and bulb evacuated. In another case, in which
iodine was found to pass through 0.211 mm. of glass, there was a
vacuum outside of the bulb and atmospheric pressure inside. here
was no evidence of bromine passing through a similar thickness of
glass after nine and one-half years. J. L. C.
http://tinyurl.com/33ct5wb
I wonder if there is still time to sign up?!
https://www.dnsc.dla.mil/pdf/Iodine%20BOA_Final.pdf
http://www.iodinenetwork.net/Resources_Iodine_Industry.html
Byda the US National Stock Piles biggest problem is Tin Disease
once it starts the only cure it to sell the infected tin off before the
disease spreads.
|
|
|
neptunium
National Hazard
Posts: 985
Registered: 12-12-2011
Location: between Uranium and Plutonium
Member Is Offline
|
|
did you see that video?
https://www.youtube.com/watch?v=vtWp45Eewtw
pretty cool huh!
need we say more about F2 reactivity?
[Edited on 19-12-2012 by neptunium]
|
|
|
Pyro
International Hazard
Posts: 1305
Registered: 6-4-2012
Location: Gent, Belgium
Member Is Offline
Mood: No Mood
|
|
if you want to see it, make it!
have you guys heard of the idea about keeping F2 in a CaF2 container? it's supposed to work.
all above information is intellectual property of Pyro.  |
|
|
kristofvagyok
National Hazard
Posts: 659
Registered: 6-4-2012
Location: Europe
Member Is Offline
Mood: No Mood
|
|
There IS F2 in webshops, the only thing what is important when buying a sample is the believing that your sample contains some of it.
https://www.youtube.com/watch?v=TQDjILTly3s
Mineral webshops offers large, nice samples of fluorite, buy some and hope that it contains a few atoms of elemental fluorine(:
I have a blog where I post my pictures from my work: http://labphoto.tumblr.com/
-Pictures from chemistry, check it out(:
"You can’t become a chemist and expect to live forever." |
|
|
bahamuth
Hazard to Others
Posts: 384
Registered: 3-11-2009
Location: Norway
Member Is Offline
Mood: Under stimulated
|
|
This guy has a tube quartz tube with the stuff and the recipe to make one your self:
Real visible fluorine. (http://periodictable.com)
Any sufficiently advanced technology is indistinguishable from magic.
|
|
|
neptunium
National Hazard
Posts: 985
Registered: 12-12-2011
Location: between Uranium and Plutonium
Member Is Offline
|
|
pretty cool! Theo has some very nice samples!
[Edited on 19-12-2012 by neptunium]
|
|
|
99chemicals
Hazard to Others
Posts: 174
Registered: 24-3-2012
Location: In the Octet
Member Is Offline
Mood: No Mood
|
|
Could you theoretically use a CaF2 vial to store Florine or would it react? If you grew a crystal and milled a lid and bottle body with a CNC?
Obviously that would be very expensive.
|
|
|
UnintentionalChaos
International Hazard
Posts: 1454
Registered: 9-12-2006
Location: Mars
Member Is Offline
Mood: Nucleophilic
|
|
| Quote: Originally posted by 99chemicals | | Could you theoretically use a CaF2 vial to store Florine or would it react? If you grew a crystal and milled a lid and bottle body with a CNC?
Obviously that would be very expensive. |
Large blocks of perfectly clear CaF2 are already used to produce optical components. I'm sure that a vessel could be made and polished to glass-like
transparency, filled with completely anhydrous F2 through a tiny hole, and sealed, perhaps with a polished, very high surface area taper and an
extremely fine film of perfluorinated grease.
Heavy metal fluoride glasses may also be an option for a more conventional ampoule, but would need a secondary ampoule to protect it from atmospheric
moisture.
Department of Redundancy Department - Now with paperwork!
'In organic synthesis, we call decomposition products "crap", however this is not a IUPAC approved nomenclature.' -Nicodem
|
|
|
woelen
Super Administrator
Posts: 7976
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
O yes, I think that it is possible to make a sample of fluorine, contained in some glass-like metal fluoride, but the cost of making such a thing,
just for display purposes, would be enormous. Probably a decent size sample will cost thousands of dollars and nobody is willing to pay such an amount
for such a sample, especially if there is uncertainty about how long such a sample will last.
I remember having seen pictures of samples of fluorine in ordinary glass ampoules, containing a clearly visible brownish/green gas mix, but I think
that these were fake. This ampoule has been on the Wiki page for fluorine for a while, but the picture was removed very quickly. Of course you can
make fake ampoules containing a little NO2 and mostly Cl2 (which, if made dry do not react with each other) and most people won't notice, because
nearly no one really knows how fluorine looks like. Especially if the gas mix is not too concentrated and the color is only weak (which apparently is
the case with real fluorine), then I think that most people won't notice the fake content.
|
|
|
paulr1234
Hazard to Self
Posts: 51
Registered: 30-8-2010
Member Is Offline
Mood: No Mood
|
|
With some persistence, earlier this year, I finally got a response from the guy that Bahamuth links to. He was willing to make one of those
Si-encapped, teflon grease treated tubes for me but he wanted a lot (a thousand bucks or so if I remember correctly.)
You can have a pretty decent night in Vegas with a $1,000.
|
|
|
Endimion17
International Hazard
Posts: 1468
Registered: 17-7-2011
Location: shores of a solar sea
Member Is Offline
Mood: speeding through time at the rate of 1 second per second
|
|
A thousand dollars? Is he insane?
I've seen that link long time ago and I agree it's possible. But a thousand dollars? LOL
Fluorine is very, very pale in colour, therefore a decent tube is needed.
|
|
|
Lambda-Eyde
National Hazard
Posts: 857
Registered: 20-11-2008
Location: Norway
Member Is Offline
Mood: Cleaved
|
|
There was a discussion on /r/chemistry about this a few days ago: http://www.reddit.com/r/chemistry/comments/148zbn/i_want_thi...
This just in: 95,5 % of the world population lives outside the USA
You should really listen to ABBAPlease drop by our IRC channel: #sciencemadness @ irc.efnet.org
|
|
|
neptunium
National Hazard
Posts: 985
Registered: 12-12-2011
Location: between Uranium and Plutonium
Member Is Offline
|
|
making F2 and its container is hardly a weekend home chemist endavour! it take platinum electrodes and CaF2 mix with HF to electrolysis... i mess with
clorine and bromine but Fluorine is a whole different ball game ... besides fluorides are toxic and so is F2, it could be done but what a mess it
would be to clean afterward! and how much would it cost in equipment just for that one experiment ...
|
|
|
Dr.Bob
International Hazard
Posts: 2658
Registered: 26-1-2011
Location: USA - NC
Member Is Online
Mood: No Mood
|
|
For $1000 you could likely buy an entire cylinder of F2. It would certainly not be transparent, but you could create a giant mess with it if it
leaks. But it would be a real sample.
I used to work (long ago) at a company with F2, HF, and several other lovely gases, and the EPA/OSHA/ETC would require yet more containment and more
special ventilation every few years, until it became impossible to work with. Now the same work is likely done in China by people with little
training, no safety equipment, and little clue what they are doing.
|
|
|
neptunium
National Hazard
Posts: 985
Registered: 12-12-2011
Location: between Uranium and Plutonium
Member Is Offline
|
|
and even with the money i doubt anybody would sale to a home chemist.....they wont even sale chlorine !
|
|
|
metalresearcher
National Hazard
Posts: 731
Registered: 7-9-2010
Member Is Offline
Mood: Reactive
|
|
Transparent medium to store elemental F2 ?
The site www.smart-elements.com supplies all nonradioactive elements except Fluorine.
This sample is actually a sample of CaF2 and not elemental F2. There is no transparent medium such as glass, quartz, Al2O3, etc. which can hold F2
without being attacked. But I know that teflon does withstand F2 and that transparent teflon exists as well. So why these acryl boxes not coated with
transparent teflon on the inside ?
[Edited on 2013-8-12 by metalresearcher]
|
|
|
papaya
National Hazard
Posts: 615
Registered: 4-4-2013
Member Is Offline
Mood: reactive
|
|
Yes, it's CaF2
|
|
|
bahamuth
Hazard to Others
Posts: 384
Registered: 3-11-2009
Location: Norway
Member Is Offline
Mood: Under stimulated
|
|
I guess since Teflon is as gas tight as a sieve and would not hold it for prolonged periodes.
Searching the forum gives:
No F2 in element webshops : why ?
Edit:
And quartz can hold fluorine, as can be read and seen in the aforementioned thread.
[Edited on 12-8-2013 by bahamuth]
Any sufficiently advanced technology is indistinguishable from magic.
|
|
|
bfesser
|
Threads Merged
12-8-2013 at 06:06 |
![[*]](images/xpblue/default_icon.gif){kind=icon}
