Mildronate
Hazard to Others
Posts: 428
Registered: 12-9-2009
Member Is Offline
Mood: Ruido sintetico
|
|
what is this
I buy this stuf in local black market but wat it is? Is it part from rotavap or it's destillation aparatus, it had broken one pipe, but i know good
glassblower who can fix it.
   
|
|
|
Dr.Bob
International Hazard
Posts: 2658
Registered: 26-1-2011
Location: USA - NC
Member Is Offline
Mood: No Mood
|
|
Looks like some sort of condenser for an old rotary evaporator. It might have been an extra trap to help capture low boiling solvents. But you
could use it for that purpose. Since most rotovaps have spherical joints for the collection flask, you could put it in place of that as a second
condenser. We have done similar things with dry ice traps/dewar condesers for highly volatile solvents.
|
|
|
Mildronate
Hazard to Others
Posts: 428
Registered: 12-9-2009
Member Is Offline
Mood: Ruido sintetico
|
|
it doesnt had joint for vacum or valve. This is very strange glasware
|
|
|
mr.crow
National Hazard
Posts: 884
Registered: 9-9-2009
Location: Canada
Member Is Offline
Mood: 0xFF
|
|
Looks like a bong. I'm kind of amused how all the stoners started using ground glass joints, borosilicate, and keck clips. Not for me, I like my
science glassware a lot more!
So the flask like thing on the end looks like a bump trap for steam distillation. It looks like there is a tiny spherical joint connected to the inner
section (last picture). Looks like a water jacket on the outside with the broken hose barb.
I'm guessing Rotavap too. The condenser faces downwards with the flask on the top. That way the input faces down at and angle and the solvents leave
the end of the condenser as a liquid. The joint looks so tiny, wouldn't pressure build up?
Double, double toil and trouble; Fire burn, and caldron bubble
|
|
|
Mildronate
Hazard to Others
Posts: 428
Registered: 12-9-2009
Member Is Offline
Mood: Ruido sintetico
|
|
Yes there is water jacket outside with broken hose barb. Yoint is tinny. Another strange thing: spirall had only one hose barb.
|
|
|
mr.crow
National Hazard
Posts: 884
Registered: 9-9-2009
Location: Canada
Member Is Offline
Mood: 0xFF
|
|
The other end of the spiral probably goes to the outside jacket
Double, double toil and trouble; Fire burn, and caldron bubble
|
|
|
Mildronate
Hazard to Others
Posts: 428
Registered: 12-9-2009
Member Is Offline
Mood: Ruido sintetico
|
|
maybe hard to tell, I will connect it to water later. I had idea to build rotavap from this, i can get rotavap mechanism with motor, few glablowing
modifications.
|
|
|
bfesser
Resident Wikipedian
Posts: 2114
Registered: 29-1-2008
Member Is Offline
Mood: No Mood
|
|
Looks like a condenser for distillation with a bump trap on the right. Definitely not rotavap.
|
|
|
Mildronate
Hazard to Others
Posts: 428
Registered: 12-9-2009
Member Is Offline
Mood: Ruido sintetico
|
|
There is no info for something like this.
|
|
|
not_important
International Hazard
Posts: 3873
Registered: 21-7-2006
Member Is Offline
Mood: No Mood
|
|
The kong thing is a condenser, I believe. It's both a outer jacket and an inner coil model, I've several similar looking one. They're intended to be
used vertical, one is part of a lab distilled water rig and included a 5 liter flask with imbedded immersion heater.
|
|
|
Mildronate
Hazard to Others
Posts: 428
Registered: 12-9-2009
Member Is Offline
Mood: Ruido sintetico
|
|
This condenser is from soviet water bidestilator.
[Edited on 22-9-2011 by Mildronate]
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
