Sciencemadness Discussion Board
Not logged in [Login ]
Go To Bottom

Printable Version  
Author: Subject: Moisture absorber refill stuff.
MR AZIDE
Hazard to Self
**




Posts: 64
Registered: 21-5-2012
Location: UNITED KINGDOM
Member Is Offline

Mood: Fizzing

[*] posted on 13-7-2012 at 10:56
Moisture absorber refill stuff.



Another OTC chemical find: ( UK people)

This is a big tub of crystals that I saw In a hardware store today.
Its for refilling those plastic moisture absorbers, that you put in a space to dehumidify it.


http://www.wilkinsonplus.com/insulation/kilrock-refill-for-moisture-traps-1kg/invt/0135524/


I cant find an MSDS, but on the back of the tub ,it seems its mostly, if not all full of CaCl2 powder / crystals, according to what I read on the back of the tub.
It can be bought in 1 and 2.5 Kg amounts.

Might be a nice easy access and cheap way of making freezing mixtures etc......
View user's profile View All Posts By User
Hexavalent
International Hazard
*****




Posts: 1564
Registered: 29-12-2011
Location: Wales, UK
Member Is Offline

Mood: Pericyclic

[*] posted on 13-7-2012 at 11:53


I'm certain that this has been covered somewhere before.

How pure is the calcium chloride? Suitable for experiments, do you think?




"Success is going from failure to failure without loss of enthusiasm." Winston Churchill
View user's profile View All Posts By User
MR AZIDE
Hazard to Self
**




Posts: 64
Registered: 21-5-2012
Location: UNITED KINGDOM
Member Is Offline

Mood: Fizzing

[*] posted on 13-7-2012 at 12:00



Probably be OK for ice freezing mixtures, attaining a much lower temp than NaCl ice freezing mixtures.
Usefull for a dessicator/ drying agent.

I suppose if it is impure, it could be recrystallized, although it is very soluble.

We need an MSDS!!!!

Some moisture absorbers contain CaO.
View user's profile View All Posts By User
Hexavalent
International Hazard
*****




Posts: 1564
Registered: 29-12-2011
Location: Wales, UK
Member Is Offline

Mood: Pericyclic

[*] posted on 13-7-2012 at 12:11


Dp us a favour; add some to liquid water. If it fizzes and reacts, then its probably calcium oxide. If it dissolves, and then a precipitate forms when you add some sodium sulfate or carbonate solution then it's likely to be calcium chloride.



"Success is going from failure to failure without loss of enthusiasm." Winston Churchill
View user's profile View All Posts By User
Pyro
International Hazard
*****




Posts: 1305
Registered: 6-4-2012
Location: Gent, Belgium
Member Is Offline

Mood: No Mood

[*] posted on 13-7-2012 at 15:26


i bought some of that stuff lately, it comes in prills that look a lot like calcium oxide, but when i break em in half there is just a thin crust of powdery stuff, the rest is a crystal. it will be fine for drying substances. but I don't know about as a reagent



all above information is intellectual property of Pyro. :D
View user's profile View All Posts By User

  Go To Top