niertap
Hazard to Self
Posts: 76
Registered: 5-8-2011
Member Is Offline
Mood: hyper-conjucated
|
|
recharging dehumidifier r410a//r134a//propane
I'm recharging my dehumidifier with refrigerant because it has stopped functioning. I was under the impression that it used r-134a, so i braised on
a valve and adapter, and charged it with it. However it appears that it actually is supposed to use r410a...
Currently the cold coils start to get cold enough for the first 2 mins or so, then they warm up to barely cold.
Some Ideas I've come up with are try to add or switch to propane, crimp the long/thin evaporator coil, reduce the pressure( remove some refrigerant),
possibly mess with the compressor so it runs to a lower pressure.
It's currently way over charged for 134a, at around 1,000 kPa
some data
---r134a 111,2 tetrafluoro ethane
bp -26.3c vap pressure at 25c 666.1kpa
--propane
bp -42c vap pressure 21.1c 853.16
--r410a 1:1 difluoromethane : pentafluoroethane
bp -48.5c vap pressure 21.1c 1,383kpa
Ignorance is bliss
Outliers in life are modeled by chemical kinetics
|
|
|
Rogeryermaw
National Hazard
Posts: 656
Registered: 18-8-2010
Member Is Offline
Mood: No Mood
|
|
r-410a is not that expensive and can be purchased without certification. protect your equipment and put the proper refrigerant in it. may also want to
replace the oil since you have used a different refrigerant.
|
|
|
Praxichys
International Hazard
Posts: 1063
Registered: 31-7-2013
Location: Detroit, Michigan, USA
Member Is Offline
Mood: Coprecipitated
|
|
Considering that a refrigerant leak is the cause of the unit's failure, you may be exposing yourself to the risk of a propane explosion if the leak
remains after recharging.
Fuel propane is often a mixture of propane and butane and will contain thiols as odorants as well as impurities of nitrogen and CO2. You may not get
the performance you expect, and the sulfur compounds might affect the integrity of the oil and pump.
|
|
|
WGTR
National Hazard
Posts: 971
Registered: 29-9-2013
Location: Online
Member Is Offline
Mood: Outline
|
|
You've got a problem that needs to be fixed before the unit will work again. These types of systems normally use sealed compressors, and all fittings
are brazed/soldered together. There aren't normally any exposed seals or places where the refrigerant can leak from, even over long periods of time.
If there is a leak, it is normally due to damage in the condenser/evaporator, or a worn-out compressor/plugged capillaries, and is probably not worth
your time to fix it...unless it is just for fun or for learning. How old is the unit?
|
|
|
Ubya
International Hazard
Posts: 1232
Registered: 23-11-2017
Location: Rome-Italy
Member Is Offline
Mood: I'm a maddo scientisto!!!
|
|
after 7 years he probably threw away his dehumidifier
---------------------------------------------------------------------
feel free to correct my grammar, or any mistakes i make
---------------------------------------------------------------------
|
|
|
Praxichys
International Hazard
Posts: 1063
Registered: 31-7-2013
Location: Detroit, Michigan, USA
Member Is Offline
Mood: Coprecipitated
|
|
Holy heck, somehow this showed up as a new thread for me... Did it get bumped by (subsequently deleted) spam perhaps? Wow.
|
|
|
Texium
Administrator
Posts: 4508
Registered: 11-1-2014
Location: Salt Lake City
Member Is Offline
Mood: PhD candidate!
|
|
Quote: Originally posted by Praxichys  | | Holy heck, somehow this showed up as a new thread for me... Did it get bumped by (subsequently deleted) spam perhaps? Wow. |
Yep- it got bumped by a sleeper spammer. I deleted the spam account.
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
