| Pages:
1
2
3 |
phlogiston
International Hazard
Posts: 1375
Registered: 26-4-2008
Location: Neon Thorium Erbium Lanthanum Neodymium Sulphur
Member Is Offline
Mood: pyrophoric
|
|
you also need to come up with an accurate method for assaying your fractions.
Don't underestimate the amount of work.
Although you seem content with just speculating and guessing, perhaps it is time to do a few minutes of googling for you, just to get an idea if your
approach is feasible.
Copper isotopes on an Ion exchange resin:
http://www.sciencedirect.com/science/article/pii/S0016703701...
They mention a mass fractionation coefficient of 0.67 promille.
So you would need a little more than 1700 steps to go from 30.8% <sup>63</sup>Cu. to 95%.
You should probably automate the process. Also because you'll need to repeat it many times to obtain significant amounts.
-----
"If a rocket goes up, who cares where it comes down, that's not my concern said Wernher von Braun" - Tom Lehrer |
|
|
Marvin
National Hazard
Posts: 995
Registered: 13-10-2002
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by deltaH  | | the nice thing about copper is that both isotopes are NMR active and fairly strongly so, therefore, a simple testing device to non destructively assay
such an alloy could in theory be constructed... ? |
This might work with salts but I would expect it to fail with metal bars.
|
|
|
deltaH
Dangerous source of unreferenced speculation
Posts: 1663
Registered: 30-9-2013
Location: South Africa
Member Is Offline
Mood: Heavily protonated
|
|
@marvin
Could you elaborate please?
|
|
|
deltaH
Dangerous source of unreferenced speculation
Posts: 1663
Registered: 30-9-2013
Location: South Africa
Member Is Offline
Mood: Heavily protonated
|
|
Can somebody volunteer @phlogiston's article please. I cannot access it. Thanks.
|
|
|
bfesser
Resident Wikipedian
Posts: 2114
Registered: 29-1-2008
Member Is Offline
Mood: No Mood
|
|
Please request papers in <strong><a href="forumdisplay.php?fid=21">References</a></strong>, not in public fora:
<strong><a href="viewthread.php?tid=25035">Wanted References and Needed Translations (9)</a></strong>
[edit] I've <a href="viewthread.php?tid=25035&page=8#pid302937">requested the paper</a> on your behalf—because I'd like
something to read. Don't expect me to do the work for you next time, though. And be sure to send a thank you U2U to whomever retrieves it. 
[Edited on 11.10.13 by bfesser]
|
|
|
deltaH
Dangerous source of unreferenced speculation
Posts: 1663
Registered: 30-9-2013
Location: South Africa
Member Is Offline
Mood: Heavily protonated
|
|
Oh crud... need to request access for that too, poor @polverone... I'm giving him a lot of work. Thanks for the request @bfesser
|
|
|
bfesser
Resident Wikipedian
Posts: 2114
Registered: 29-1-2008
Member Is Offline
Mood: No Mood
|
|
Huh. I thought you would have requested References access before Whimsy. When you're granted access, you'll see
that the paper has already been retrieved by Dany.
What's up with the @ before usernames?
|
|
|
deltaH
Dangerous source of unreferenced speculation
Posts: 1663
Registered: 30-9-2013
Location: South Africa
Member Is Offline
Mood: Heavily protonated
|
|
Just a bad habit for making names stand out... I need to quit doing that! So far people have been mostly attaching references they refer to.
|
|
|
bfesser
Resident Wikipedian
Posts: 2114
Registered: 29-1-2008
Member Is Offline
Mood: No Mood
|
|
Yup. People do that a lot, but it's good practice to keep them in the private forum so they don't show up on Google. We don't need
Polverone getting sued or the website shutdown because some publication's arsehole lawyers decide to actively enforce their
copyright. It's not an official policy (yet), but I'm trying to steer members in that direction.
[edit] I use boldface type ( [b] or <strong> ), as that's how the board software displays usernames.
[Edited on 11.10.13 by bfesser]
|
|
|
deltaH
Dangerous source of unreferenced speculation
Posts: 1663
Registered: 30-9-2013
Location: South Africa
Member Is Offline
Mood: Heavily protonated
|
|
Yeah my thoughts the same and agreed!
|
|
|
deltaH
Dangerous source of unreferenced speculation
Posts: 1663
Registered: 30-9-2013
Location: South Africa
Member Is Offline
Mood: Heavily protonated
|
|
| Quote: | They mention a mass fractionation coefficient of 0.67 promille.
So you would need a little more than 1700 steps to go from 30.8% 63Cu. to 95%. |
This is indeed very large!
How did you work this out?
Yes automation is key, which is why I was initially fond of some electrophoresis version where you could send the ions backwards and forwards across
the length of some stationary phase.
Thanks for the paper, I now know that I can use a ionic resin as the stationary phase and 3M HCl to elute with.
Now to figure out the simplest way to automate this... there's lots of room for creative problem solving here lol
|
|
|
ElectroWin
Hazard to Others
Posts: 224
Registered: 5-3-2011
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by watson.fawkes |
Isotopic separation is just plain difficult, requiring expensive equipment that's expensive to run. Not to mention the test equipment to characterize
the product is itself expensive (mass spectrometer).
|
dangit, i want the future to be here already..
then i could just employ maxwell's demon to do my dirty work. 
|
|
|
phlogiston
International Hazard
Posts: 1375
Registered: 26-4-2008
Location: Neon Thorium Erbium Lanthanum Neodymium Sulphur
Member Is Offline
Mood: pyrophoric
|
|
I intentionally left this as an exercise for the student  The math is not
difficult (if I can do it, nearly anyone can).
Also, read up on 'theoretical plates' if you have to. This is an important concept in chromatography and will help you realise how making a column
with ion-exchange resin, rather than doing it 'batch-wise', will help in terms of the number of purification steps you need.
It shouldn't be too hard to automate an ion-exchange based approach.
[Edited on 14-10-2013 by phlogiston]
-----
"If a rocket goes up, who cares where it comes down, that's not my concern said Wernher von Braun" - Tom Lehrer |
|
|
| Pages:
1
2
3 |
![[*]](images/xpblue/default_icon.gif){kind=icon}
