bb911gt4
Harmless
Posts: 17
Registered: 25-12-2013
Member Is Offline
Mood: No Mood
|
|
Sensitize Nitromethane for a rifle bullet round?
Hey guys,
I'm new to the forum and I was wondering if anyone has ever been successful in sensitizing Nitromethane to detonate with a rifle bullet round.
I've played around w/ Ammonium Nitrate/AL mixtures and had a blast.
Thanks!
|
|
|
gnitseretni
Hazard to Others
Posts: 280
Registered: 5-1-2007
Location: Medellin
Member Is Offline
Mood: No Mood
|
|
Not sure if it's bullet sensitive (I used a detonator), but I've successfully detonated NM sensitized with Microballoons that I found at a local hobby
store. Don't quote me on this, but I think you only need like 1% by weight microballoons.. which is not a lot in "weight" but is in "volume" because
it's so lightweight.
I have a 30-06 and plenty of NM, but no microballoons. If I did I would've tried it and let you know.
There are other ways to sensitize NM, but again, I don't know if they're bullet sensitive. You can sensitize NM with Amines, hexamine, Nitric acid,
etc. But I think microballoons is probably the easiest to find.
|
|
|
bb911gt4
Harmless
Posts: 17
Registered: 25-12-2013
Member Is Offline
Mood: No Mood
|
|
Ok,
Maybe I'll give that a try. Any idea what size microballoons are best?
How do you think this would compare to AN/AL mixtures?
I'd really like to hear from someone that has had a successful mixture before I start spending cash.
|
|
|
bb911gt4
Harmless
Posts: 17
Registered: 25-12-2013
Member Is Offline
Mood: No Mood
|
|
Hey guys,
So here's what I tried. 74% Nitromethane, 5% microballons, 5% Hexamine fuel tablet (from ESbit), 16% aluminum powder. I shot it with a .223 from
about 20 yds. There was no detonation. Any suggestions?
|
|
|
Ral123
National Hazard
Posts: 735
Registered: 31-12-2011
Member Is Offline
Mood: No Mood
|
|
NM is one of the most insensitive materials. It's so insensitive it's sold freely. It's like cast TNT. You want to make something that requires 400g
pressed TNT booster bullet sensitive.
Here's what you do: freeze the NM, crush it to micro crystals and mix it with micro magnesium particles. Then shoot with no less then .50 BMG
|
|
|
bb911gt4
Harmless
Posts: 17
Registered: 25-12-2013
Member Is Offline
Mood: No Mood
|
|
From everything I read, NM can be made cap sensitive w/ aluminum, amines, or microballoons. It seems that cap sensitive and rifle sensitive are not
too far off from each other.
|
|
|
Ral123
National Hazard
Posts: 735
Registered: 31-12-2011
Member Is Offline
Mood: No Mood
|
|
There's somewhat of a difference between a pointy lead slug at 750m/s and a gram well pressed PETN and lead azide in thin aircraft aluminium with
Gurney velocity of 2000m/s+ not to mention the extreme heat.
[Edited on 14-1-2014 by Ral123]
|
|
|
Dany
Hazard to Others
Posts: 482
Registered: 3-8-2013
Member Is Offline
Mood: No Mood
|
|
It's Gurney velocity, not grunny nor granny!!!!
on what Gurney velocity are you talking about???
Dany.
|
|
|
Ral123
National Hazard
Posts: 735
Registered: 31-12-2011
Member Is Offline
Mood: No Mood
|
|
It was about time someone to hard critique me. I was talking about the speed of the aluminium particles and gases that the cap will generate if the
case is reasonably thin walled.
|
|
|
bb911gt4
Harmless
Posts: 17
Registered: 25-12-2013
Member Is Offline
Mood: No Mood
|
|
I do have some powdered magnesium available. Do you think this would be better than the aluminum?
Do you guys know of any other good exploding target recipes?
|
|
|
Ral123
National Hazard
Posts: 735
Registered: 31-12-2011
Member Is Offline
Mood: No Mood
|
|
But it was a joke. Anyway about that recipe. So you need some chlorate and red phosphorus. And a bunch of spare body parts  . And there's always the classic Pb3O4/German dark.
|
|
|
hyfalcon
International Hazard
Posts: 1003
Registered: 29-3-2012
Member Is Offline
Mood: No Mood
|
|
copper oxide and aluminum powder works along with standard 70/30 flash.
|
|
|
Rosco Bodine
Banned
Posts: 6370
Registered: 29-9-2004
Member Is Offline
Mood: analytical
|
|
http://www.boomershoot.org/general/Nitro.htm
|
|
|
bb911gt4
Harmless
Posts: 17
Registered: 25-12-2013
Member Is Offline
Mood: No Mood
|
|
I appreciate the references to other ways to sensitize Ammonium Nitrate, but I'm really looking for something different.
I could easily pick up some aniline to sensitize my NM. Does anyone have experience with this?
|
|
|
Turner
Hazard to Others
Posts: 197
Registered: 2-12-2013
Member Is Offline
Mood: No Mood
|
|
I don't know what you do or don't have access to, rifle detonating explosives doesn't sound like a lot of fun to me, I'd just stick with your AN/al
charges.
You might try adding anhydrous nitric acid to your NM, this may or may not be bullet sensitive.
|
|
|
Pard
Harmless
Posts: 38
Registered: 29-11-2013
Member Is Offline
Mood: No Mood
|
|
Is possible you just want to do reactive target or is it imperative it must be sensitized mix. Otherwise you could have a layer on outside.
You say you had a blast with ammonium nitrate / nitromethane. I of understand it was not bullet sensitive. Though I've been told the reactive target
mix / tannerite mix was just ammonal. Surely if that works, then NM wouldn't make it less sensitive. At what distance does .223 achieve terminal
velocity? maybe 20 yards was too close or far.
|
|
|
Scientwisted
Harmless
Posts: 21
Registered: 6-12-2013
Location: Penn USA
Member Is Offline
Mood: mellow
|
|
The "terminal velocity" of any conventional gun round is achieved the moment the bullet leaves the end of the barrel. From then on it is acted upon by
wind resistance and drag and it will continue to loose velocity until it stops. As far as the NM for a reactive targets goes I'm stumped, I really
believe that AN/Al is the most efficient and economical material for reactive targets and if you like the way that works then you already have a
solution.
|
|
|
Turner
Hazard to Others
Posts: 197
Registered: 2-12-2013
Member Is Offline
Mood: No Mood
|
|
a bullet is intact traveling it's fastest approximately 10 feet or so beyond the end of a gun barrel depending on other factors.
|
|
|
bb911gt4
Harmless
Posts: 17
Registered: 25-12-2013
Member Is Offline
Mood: No Mood
|
|
Yeah, I thought about putting in on the outside, but really I'm looking for a simple target that is more powerful than the AN/AL mix. I don't really
want to go through the hassle of attaching it to the outside every time I want to shoot.
Thanks for the suggestion though!
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
