Pages:
1
2 |
Tungsten.Chromium
Harmless
Posts: 41
Registered: 9-9-2014
Member Is Offline
Mood: No Mood
|
|
Recommendations for a hotplate?
I'm really starting to get into my hobby of chemistry and while studyino it has taught me some cool stuff. I want to try a few things.
I have a few various Pyrex flasks and such, but it looks like a key thing I'm missing is a hot plate/magnetic stirrer. I've been researching around
it looks like this is one of the things you want to spend a few bucks on so it lasts(sort of like an electrician's multimeter).
The one I've been looking at is this one: http://www.amazon.com/gp/aw/d/B004DGIC0W?pc_redir=1414184305...
It looks like corning makes the best stuff, and this is one of the best models they have, but the cheapest I've been able to find it anywhere is over
500.00. Is it worth the money to invest in this one or am I better going with a cheaper option. I really like how it has digital readouts of the
stir RPM and temperature
Prosit!
|
|
Texium
Administrator
Posts: 4568
Registered: 11-1-2014
Location: Salt Lake City
Member Is Offline
Mood: PhD candidate!
|
|
You might want to check out ebay. I found this one there:
It's old, but it works great. I got it for only $45 including shipping!
|
|
j_sum1
Administrator
Posts: 6308
Registered: 4-10-2014
Location: At home
Member Is Offline
Mood: Most of the ducks are in a row
|
|
Really consider what you actually need. there will be plenty to spend your money on.
My magnetic stirrer is an old PC fan with two button neodymium magnets stuck onto it with a hot glue gun. Stirrer bars were $7 from China on eBay. I
am using a camp stove as a burner. I might bum around some yard sales to see if I can pick up a hot plate of some variety (Ok, the cheap motel
variety).
I am obviously going to run into trouble the day I wish to stir and heat at the same time. Then my setup will be a PITA. However, when that day
comes I will shell out for one of these or something similar: http://www.ebay.com.au/itm/271274303830?ssPageName=STRK:MEWA...
And as a bonus I will have some stirring and heating gear to allow me to do two things at once.
|
|
aga
Forum Drunkard
Posts: 7030
Registered: 25-3-2014
Member Is Offline
|
|
Choice of Hotplate/Stirrer basically comes down to two factors:-
1. Vanity
2. Money
The really expensive ones look nice, heat stuff and stir stuff.
The cheap ones look less nice, heat stuff and stir stuff.
The second hand ones look awful (if they ever really got used), heat stuff, and stir stuff.
Home made stuff can look, er, interesting, yet can still heat stuff, and stir stuff.
|
|
j_sum1
Administrator
Posts: 6308
Registered: 4-10-2014
Location: At home
Member Is Offline
Mood: Most of the ducks are in a row
|
|
Ok. I'm interesting.
|
|
forgotpassword
Harmless
Posts: 47
Registered: 12-8-2014
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by aga | Choice of Hotplate/Stirrer basically comes down to two factors:-
1. Vanity
2. Money
The really expensive ones look nice, heat stuff and stir stuff.
The cheap ones look less nice, heat stuff and stir stuff.
The second hand ones look awful (if they ever really got used), heat stuff, and stir stuff.
Home made stuff can look, er, interesting, yet can still heat stuff, and stir stuff. |
Well said.
|
|
DrMario
Hazard to Others
Posts: 332
Registered: 22-9-2014
Member Is Offline
Mood: Underpaid.
|
|
Quote: Originally posted by Tungsten.Chromium | I'm really starting to get into my hobby of chemistry and while studyino it has taught me some cool stuff. I want to try a few things.
I have a few various Pyrex flasks and such, but it looks like a key thing I'm missing is a hot plate/magnetic stirrer. I've been researching around
it looks like this is one of the things you want to spend a few bucks on so it lasts(sort of like an electrician's multimeter).
The one I've been looking at is this one: http://www.amazon.com/gp/aw/d/B004DGIC0W?pc_redir=1414184305...
It looks like corning makes the best stuff, and this is one of the best models they have, but the cheapest I've been able to find it anywhere is over
500.00. Is it worth the money to invest in this one or am I better going with a cheaper option. I really like how it has digital readouts of the
stir RPM and temperature
|
That is, indeed, one of the best hotplates under US$1000. It's the kind my research institute would buy, because
- it uses PWD to adjust the hotplate temperature, which allows it to quickly reach the desired temperature, with little overshoot (cheaper hotplates
use a simple on/off system). This is combined with a CPU-controlled algorithm, again, to attain the target temperature quickly and with low overshoot.
- it allows for accurate temperature adjustment with very low bias.
- very durable ceramic plate surface. You start to appreciate this when your hotplate is as heavily used as ours.
- option to add external temperature sensor (or, as Corning calls them, "external controller").
- uniform temperature distribution across the plate. You will appreciate this... quite rarely, I guess, if all you need to do is heat a beaker. If
you need to process wafers or other flat samples (with films), you will want this feature - but to be honest, you'd need a larger hotplate.
How important are the features listed above? For an amateur, probably not too much. I am an amateur too (in addition to my day job), and I know I
wouldn't invest in such a hotplate. Not unless I become unexpectedly rich, which isn't going to happen as I don't play the lottery.
Finally, that Corning hotplate will only fully shine if you also buy this:
http://www.amazon.com/Corning-External-Temperature-Controlle...
- that is, the external thermal sensor that allows you to adjust the temperature of the liquid you're heating, rather than just adjust the temperature
of the plate on which you are heating. These Corning thermal sensors are quite expensive, and adding it all together, you'll have to pay US$ 900.
Too much, IMHO, for an amateur.
Instead, look for the cheaper Chinese hotplates that go for about US$100 including shipping. Everything on those models is worse than with the Corning
hotplate, but you still can stir and heat, and have a reasonable control over the temperature.
[Edited on 26-10-2014 by DrMario]
|
|
DrMario
Hazard to Others
Posts: 332
Registered: 22-9-2014
Member Is Offline
Mood: Underpaid.
|
|
Not at all true. The expensive hotplates definitely have their place. Not in an amateur lab perhaps, but their raison d'etre has nothing to do with
"vanity".
|
|
jamit
Hazard to Others
Posts: 375
Registered: 18-6-2010
Location: Midwest USA
Member Is Offline
Mood: No Mood
|
|
The hotplate above is not good. It may be cheap but it's too old and unreliable and cosmetically very ugly - haha. The best hotplate/stirrer combo
is manufactured by Corning. Any one of the following model will be an excellent addition to any home lab: PC-351, PC-320 or PC-420. I personally
prefer the PC-420 model. They will cost about 150.00 on ebay, used. I used my hotplate stirrer quite a bit so I rather make some investment. Good
luck.
|
|
NOV:5
Harmless
Posts: 24
Registered: 5-9-2014
Member Is Offline
Mood: Moodless
|
|
I guess I'm near about the same place. It's probably a newbie thing, scouring Ebay looking for gear. I've had quite an education on glassware..still
wondering how one decides on a joint size standard...
I did the the same thing you've done when it came to a hot plate/stirrer... Initially I bought a $20 hot plate at Walmart. It worked but I wanted some
indication of temperature..
I looked all over ebay, tons of choices from top to bottom. Ended up buying the 10 x 10 Corning digital with probe at Amazon...
Mainly because I wanted digital, the corning looked like a solid unit, and it is.
Looking for a centrifuge now, will probably get that used..
Edited to add;
So far the most startling thing cost wise, has been books..
[Edited on 27-10-2014 by NOV:5]
[Edited on 27-10-2014 by NOV:5]
Remember, Remember...
|
|
Texium
Administrator
Posts: 4568
Registered: 11-1-2014
Location: Salt Lake City
Member Is Offline
Mood: PhD candidate!
|
|
Quote: Originally posted by jamit | The hotplate above is not good. It may be cheap but it's too old and unreliable and cosmetically very ugly - haha. The best hotplate/stirrer combo
is manufactured by Corning. Any one of the following model will be an excellent addition to any home lab: PC-351, PC-320 or PC-420. I personally
prefer the PC-420 model. They will cost about 150.00 on ebay, used. I used my hotplate stirrer quite a bit so I rather make some investment. Good
luck. | If you're referring to the hotplate that I have, I've tested it, and it works great. It's got a
durable ceramic plate and the whole thing is built like a ton of bricks. My theory is that if it's continued working well for the past 40 years it's
not going to give out any time soon!
|
|
Dr.Bob
International Hazard
Posts: 2724
Registered: 26-1-2011
Location: USA - NC
Member Is Offline
Mood: No Mood
|
|
I have a few more older used Corning stirring hotplates that I am currently checking, cleaning, and testing. I have sold most of these used ones for
$100 plus shipping, which is about $20. A few need new cords, which is what I am working on now. It turns out that DCM, DMSO, DMF, and many other
solvents are rough on the cords and soften the plastic a lot. :-( But I have lots of replacement cords from other items.
I have a few used ones, mostly 351 type or other older ones. Most are a little stained or dirty, but I have been using the same models for years in
the lab at work, some of those are 20+ years old, and still work well. If people are interested, let me know and I can make a waiting list. Once I
get some ready, I will go by the people who were first to ask. I also have one or two stirring only plates, maybe also one hot plate only (no
stirring). The stir plates are great for use with heating mantles and are a little cheaper
|
|
j_sum1
Administrator
Posts: 6308
Registered: 4-10-2014
Location: At home
Member Is Offline
Mood: Most of the ducks are in a row
|
|
Thanks Dr Bob. I think I know the answer to this, but how much would it cost to ship to Australia?
If the total cost could be kept below $150 I might be interested in one of these.
|
|
DrMario
Hazard to Others
Posts: 332
Registered: 22-9-2014
Member Is Offline
Mood: Underpaid.
|
|
Dr.Bob, in which country are you and your Corning hotplates? USA? In that case j_sum1 may not be able to use them. And neither could I
|
|
DrMario
Hazard to Others
Posts: 332
Registered: 22-9-2014
Member Is Offline
Mood: Underpaid.
|
|
Quote: Originally posted by zts16 | You might want to check out ebay. I found this one there:
It's old, but it works great. I got it for only $45 including shipping! |
My greatest issue with that hotplate is that I have no knowledge of the plate's temperature, and no way to adjust said temperature.
|
|
Texium
Administrator
Posts: 4568
Registered: 11-1-2014
Location: Salt Lake City
Member Is Offline
Mood: PhD candidate!
|
|
Quote: Originally posted by DrMario | Quote: Originally posted by zts16 | You might want to check out ebay. I found this one there:
It's old, but it works great. I got it for only $45 including shipping! |
My greatest issue with that hotplate is that I have no knowledge of the plate's temperature, and no way to adjust said temperature.
| Yes, unfortunately the plastic dial that shows what temperature it's at is missing.
|
|
DrMario
Hazard to Others
Posts: 332
Registered: 22-9-2014
Member Is Offline
Mood: Underpaid.
|
|
Quote: Originally posted by zts16 | Quote: Originally posted by DrMario | Quote: Originally posted by zts16 | You might want to check out ebay. I found this one there:
It's old, but it works great. I got it for only $45 including shipping! |
My greatest issue with that hotplate is that I have no knowledge of the plate's temperature, and no way to adjust said temperature.
| Yes, unfortunately the plastic dial that shows what temperature it's at is missing. |
And even if it were there it would be too imprecise to indicate anything meaningful.
Really, that's my only (but pretty fundamental) gripe with your hotplate. Otherwise, it's quite solid.
|
|
j_sum1
Administrator
Posts: 6308
Registered: 4-10-2014
Location: At home
Member Is Offline
Mood: Most of the ducks are in a row
|
|
Like I said before, consider what you actually need.
If you actually need precise control over the exact temperature you are providing then you will need something flash. Me, the most I am likely to
need to do is put a thermometer in my flask to find out what is going on. Too hot and I turn it down. Too cold and I turn it up. i suspect this is
typical of most hobby chemists.
To answer the original question, you don't need the fancy schmancy hotplate. Spend your money on something else until you do need it. By then you
will have the experience and knowledge to know exactly what your requirements are. (Buying something more than what you need could amount to vanity.
Or a misplaced sense of convenience. Or having too much money. Or something else. But whatever it is, for a beginner it is not chemistry related.)
|
|
diddi
National Hazard
Posts: 723
Registered: 23-9-2014
Location: Victoria, Australia
Member Is Offline
Mood: Fluorescent
|
|
temp stability is important if you are refluxing or distilling. and variable stirrer speed I found very important as well.
|
|
Dr.Arz
Harmless
Posts: 26
Registered: 14-10-2014
Member Is Offline
Mood: No Mood
|
|
Is the hotplate strong enough? I have found that weaker, less than 500 watt plates are pretty toyish on doing anything unless you do 50ml volumes and
have 8 hours time to distill them. Plus if you gonna do vacuum distillations you will need magnetic stirring or it will puke all up.
Just for you to know the chinese bante plate is horrible. It takes half an hour to heat 50ml of water to boil and the stirrer is so unbalanced it will
vibrate the contents off the plate in no time.
[Edited on 27-10-2014 by Dr.Arz]
|
|
j_sum1
Administrator
Posts: 6308
Registered: 4-10-2014
Location: At home
Member Is Offline
Mood: Most of the ducks are in a row
|
|
Quote: Originally posted by Dr.Arz | Just for you to know the chinese bante plate is horrible. It takes half an hour to heat 50ml of water to boil and the stirrer is so unbalanced it will
vibrate the contents off the plate in no time |
Thanks for the heads up. On closer inspection I see that it is only 150 watts. When I get around to buying something I will get one with more
oomph.
|
|
DrMario
Hazard to Others
Posts: 332
Registered: 22-9-2014
Member Is Offline
Mood: Underpaid.
|
|
Quote: Originally posted by Dr.Arz |
Just for you to know the chinese bante plate is horrible. It takes half an hour to heat 50ml of water to boil and the stirrer is so unbalanced it will
vibrate the contents off the plate in no time.
[Edited on 27-10-2014 by Dr.Arz] |
Which ones are these "bante" hot plates? If you can link to a photo of one, that would help me a great deal.
|
|
j_sum1
Administrator
Posts: 6308
Registered: 4-10-2014
Location: At home
Member Is Offline
Mood: Most of the ducks are in a row
|
|
I think the one I linked to up thread.
http://www.sciencemadness.org/talk/viewthread.php?tid=41282&...
|
|
Dr.Bob
International Hazard
Posts: 2724
Registered: 26-1-2011
Location: USA - NC
Member Is Offline
Mood: No Mood
|
|
I am in the US, so these are 110 V, not helpful in most other countries. But there are other used ones on Ebay and other sites which come up, some
are reasonably priced. Corning makes 220 versions, so that would be fine for most other countries.
|
|
DrMario
Hazard to Others
Posts: 332
Registered: 22-9-2014
Member Is Offline
Mood: Underpaid.
|
|
Not really: the only "reasonably" priced Corning hotplates are from US eBay sellers. The rest, which is very little, is unreasonably priced.
I just spent the better part of a quarter of an hour trying to find any non-US Corning hotplate on eBay. I came up with nothing.
|
|
Pages:
1
2 |