Sciencemadness Discussion Board
Not logged in [Login ]
Go To Bottom

Printable Version  
 Pages:  1  2
Author: Subject: Which nitrate to buy?
woelen
Super Administrator
*********




Posts: 7976
Registered: 20-8-2005
Location: Netherlands
Member Is Offline

Mood: interested

[*] posted on 14-4-2015 at 05:52


One recrystallization is enough to get a nice pure product.

After boiling down, first let it cool to room temperature before putting it in the freezer. The slower the cooling down, the larger and nicer your crystals will be and the easier it will be to decant the liquid from the crystal mass. You also must not boil down so that the solution is saturated at the boiling point. If you do that, then you get very fast crystallization, leading to small crystals and less pure crystals.




The art of wondering makes life worth living...
Want to wonder? Look at https://woelen.homescience.net
View user's profile Visit user's homepage View All Posts By User
Blunotte
Harmless
*




Posts: 49
Registered: 2-4-2015
Member Is Offline

Mood: No Mood

[*] posted on 15-4-2015 at 07:01


Argh, I cannot find here the potassium carbonate, I have only sodium bicarbonate, but it's solubility it's very low :mad:
So I need some time for this experiment, sorry :(




View user's profile View All Posts By User
Bert
Super Administrator
*********




Posts: 2821
Registered: 12-3-2004
Member Is Offline

Mood: " I think we are all going to die. I think that love is an illusion. We are flawed, my darling".

[*] posted on 15-4-2015 at 07:50


Quote: Originally posted by Blunotte  
Argh, I cannot find here the potassium carbonate, I have only sodium bicarbonate, but it's solubility it's very low :mad:
So I need some time for this experiment, sorry :(


Find wood ashes, or charcoal ashes. Do a water extraction...

http://faculty.rmc.edu/jthoburn/ChemArt/EX03.Potash.pdf

Been done since dawn of civilization-


[Edited on 15-4-2015 by Bert]




Rapopart’s Rules for critical commentary:

1. Attempt to re-express your target’s position so clearly, vividly and fairly that your target says: “Thanks, I wish I’d thought of putting it that way.”
2. List any points of agreement (especially if they are not matters of general or widespread agreement).
3. Mention anything you have learned from your target.
4. Only then are you permitted to say so much as a word of rebuttal or criticism.

Anatol Rapoport was a Russian-born American mathematical psychologist (1911-2007).

View user's profile View All Posts By User
Sulaiman
International Hazard
*****




Posts: 3558
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline


[*] posted on 15-4-2015 at 14:56


just planning for RFNA / WFNA synthesis via
Ca(NO3)2 + H2SO4 = 2HNO3 + CaSO4
and I have questions ...

1) since the calcium sulphate precipitate may mess up my distillation flask
is there any reason why I should not perform the reaction in a beaker
then decant the liquid into the distillation flask ?

2) one mole of calcium nitrate = 164 g
requires one mole of sulphuric acid = 98 g = c56 ml of 96% H2S04
if I bake the calcium nitrate above 130 C to get the anhydrous form
how much excess sulphuric acid do I need for the drying part?
(my inclination is to use c100 ml total but I'd like to know how to calculate it)

3) I have a small vacuum pump for filtrations on order
http://www.ebay.co.uk/itm/311057103383?_trksid=p2060353.m274...
if I use this (with a NaOH trap) and it does produce its advertised -80 kpa
(21 kpa absolute, c160 mm Hg)
the nitric acid should boil at about 45 C ... is it worth the effort ?
View user's profile View All Posts By User
violet sin
International Hazard
*****




Posts: 1475
Registered: 2-9-2012
Location: Daydreaming of uraninite...
Member Is Offline

Mood: Good

[*] posted on 15-4-2015 at 15:43


@ Blunotte: Potassium carbonate can be made from cream of tartar according to wiki( almost bottom of the page). Should be able to find that in a store, I got some from the bulk bins for cheap. Think a couple pounds of it was less than 5$ US in this way.
View user's profile View All Posts By User
 Pages:  1  2

  Go To Top