runninfarmer
Harmless
Posts: 23
Registered: 5-12-2011
Member Is Offline
Mood: No Mood
|
|
6 g/hr Ozone Generator Build
I've built a 6 g/hr ozone generator using these ozone generators off ebay: http://www.ebay.com/itm/200980883484?_trksid=p2057872.m2749....
All the plastic brackets are 3D printed and I will post the stl files on thingiverse if anyone's interested. Here's the link to the thingiverse page:
http://www.thingiverse.com/thing:795015. It's working pretty well. I'm going to test it on some canola oil.
[Edited on 27-4-2015 by runninfarmer]
[Edited on 27-4-2015 by runninfarmer]
[Edited on 27-4-2015 by runninfarmer]
|
|
|
Dr.Bob
International Hazard
Posts: 2656
Registered: 26-1-2011
Location: USA - NC
Member Is Offline
Mood: No Mood
|
|
Cool, I have used a few ozone generators before, but that is a nice small size. The bigger ones are a real PITA to use, and the ones I used were
from the 1970's or so, so not real modern. Not that the technology has changes in a century. But very cool.
|
|
|
runninfarmer
Harmless
Posts: 23
Registered: 5-12-2011
Member Is Offline
Mood: No Mood
|
|
Thanks Dr.Bob! I'm excited to test it fully. Need to get my hands on a decent sized oxygen tank and regulator.
|
|
|
Varmint
Hazard to Others
Posts: 264
Registered: 30-5-2013
Location: Near Atlanta, GA
Member Is Offline
Mood: No Mood
|
|
What is the fan for?
And if there is anything but quartz or glass in contact with the gas you don't have an ozone generator, but an ozone and possibly toxic byproducts
generator.
6G/Hr based on what?
|
|
|
runninfarmer
Harmless
Posts: 23
Registered: 5-12-2011
Member Is Offline
Mood: No Mood
|
|
Pretty sure they're quartz tubes, you need a cooling fan to blow on the tubes, otherwise they overheat. Only byproducts you should get are ozone, if
running pure O2. Some people run air as input, which can lead to NOx and HNO3 formation which would be bad. Most ozone tubes are designed with quartz
and stainless steel. If you go to the ebay link, each tube is rated to produce 3 g/hr. I have not verified this yet, so I believe the 6 g/hr rating is
fair.
[Edited on 27-4-2015 by runninfarmer]
|
|
|
hissingnoise
International Hazard
Posts: 3940
Registered: 26-12-2002
Member Is Offline
Mood: Pulverulescent!
|
|
| Quote: | | . . . each tube is rated to produce 3 g/hr. |
Something of a wild exaggeration, obviously . . .
|
|
|
jock88
National Hazard
Posts: 505
Registered: 13-12-2012
Member Is Offline
Mood: No Mood
|
|
How would you actually go about verify how much ozone it products?
|
|
|
hissingnoise
International Hazard
Posts: 3940
Registered: 26-12-2002
Member Is Offline
Mood: Pulverulescent!
|
|
Dissolve it in CCl4, and weigh . . .
|
|
|
runninfarmer
Harmless
Posts: 23
Registered: 5-12-2011
Member Is Offline
Mood: No Mood
|
|
How is that an exaggeration, particularly if passing pure O2? Unless you know the design equations for ozone generation, how do you know? I've read
online most of the small scale generators use the same size and type of tubes. This board is full of haters apparently.
[Edited on 27-4-2015 by runninfarmer]
|
|
|
Varmint
Hazard to Others
Posts: 264
Registered: 30-5-2013
Location: Near Atlanta, GA
Member Is Offline
Mood: No Mood
|
|
Describe the output voltage and current of the high voltage sources please.
|
|
|
runninfarmer
Harmless
Posts: 23
Registered: 5-12-2011
Member Is Offline
Mood: No Mood
|
|
That is a good questions. The ebay page says 10W, while I found an identical one with 40W rating at 3 kV. Based on these numbers, I would say 3kV at
3-13 mA.
|
|
|
Marvin
National Hazard
Posts: 995
Registered: 13-10-2002
Member Is Offline
Mood: No Mood
|
|
I would think a colourimetric iodide test would work for ozone determination. Either go forward with a known oxidising agent to get reference levels
or back titrate with a reducing agent.
3g/h from a 10W device sounds... optimistic. I think most people would expect 1g/h or less.
|
|
|
Molecular Manipulations
Hazard to Others
Posts: 447
Registered: 17-12-2014
Location: The Garden of Eden
Member Is Offline
Mood: High on forbidden fruit
|
|
Sadly, running two ozone generators in series wont quite double the production yields. Diatomic oxygen is split into seperate atoms, called radicals.
These are very unstable, and will combine with the first particals they smash into, if they hit an oxygen molecule, they form ozone, a radical affords
a oxygen molecule, and an ozone molecule produces two oxygen molecules. Thus the higher the concentration of ozone, the higher the chances of creating
more oxygen from it, and the lower yields will be.
-The manipulator
We are all here on earth to help others; what on earth the others are here for I don't know. -W. H. Auden
|
|
|
macckone
International Hazard
Posts: 2159
Registered: 1-3-2013
Location: Over a mile high
Member Is Offline
Mood: Electrical
|
|
Nitrogen oxides are an unavoidable by-product with air contact. When ozone contacts nitrogen the nitrogen oxides form. Unless you use pure oxygen and
pump it into the substance you want to oxidize.
|
|
|
hissingnoise
International Hazard
Posts: 3940
Registered: 26-12-2002
Member Is Offline
Mood: Pulverulescent!
|
|
| Quote: | | This board is full of haters apparently. |
Bollocks!
|
|
|
runninfarmer
Harmless
Posts: 23
Registered: 5-12-2011
Member Is Offline
Mood: No Mood
|
|
Yes, I have already stated air will form NOx with ozone, which is why I intend to use pure O2. Also, to answer Molecular's statement, this is run in
parallel, not series. There will be two pure O2 feeds and combined into one outlet after ozonation.
|
|
|
Molecular Manipulations
Hazard to Others
Posts: 447
Registered: 17-12-2014
Location: The Garden of Eden
Member Is Offline
Mood: High on forbidden fruit
|
|
Oh I see, that should double the total production, but the concentration will remain the same.
Macckone, ozone cannot oxidize nitrogen under standard conditions, you are right that using air can produce nitrogen oxides, but this due to
dinitrogen being split into radicals, which combine with oxygen or oxygen radicals combining with dinitrogen. Never ozone oxidizing dinitrogen.
[Edited on 28-4-2015 by Molecular Manipulations]
-The manipulator
We are all here on earth to help others; what on earth the others are here for I don't know. -W. H. Auden
|
|
|
macckone
International Hazard
Posts: 2159
Registered: 1-3-2013
Location: Over a mile high
Member Is Offline
Mood: Electrical
|
|
Never say never, there is an article from the AMS regarding nitrogen fixation due to lightning that found that ozone can oxidize nitrogen. If
nitrogen is present in the feed gas then most nitrogen oxides are a result of lower oxides reacting with ozone and oxygen to form higher oxides. N
2 O is formed by ozone with nitrogen.
|
|
|
Molecular Manipulations
Hazard to Others
Posts: 447
Registered: 17-12-2014
Location: The Garden of Eden
Member Is Offline
Mood: High on forbidden fruit
|
|
Ref? I just searched for a couple minutes with no hits. Ozone reacting to make nitrous rather than nitric indeed makes kinetic sense, and does explain
how nitrogen could get oxidized without making the color or smell of nitric. However I bet nitrous reacts again with ozone to make oxygen and
nitrogen, not sure about that though.
-The manipulator
We are all here on earth to help others; what on earth the others are here for I don't know. -W. H. Auden
|
|
|
macckone
International Hazard
Posts: 2159
Registered: 1-3-2013
Location: Over a mile high
Member Is Offline
Mood: Electrical
|
|
Not sure if this is the right one.
http://journals.ametsoc.org/doi/abs/10.1175/1520-0469%281980...
Most of the lower oxides are oxidized by ozone and oxygen in the
presence of moisture. There are lot of pathways that are not
very common at room temperature. I think the key is ozone
being a very unstable compound and colliding with nitrogen with
enough energy. Ozone at room temperature probably reacts very
slowly but at a few thousand degrees it will almost always react,
Ie. In microseconds.
|
|
|
cmos6667
Hazard to Self
Posts: 50
Registered: 10-4-2015
Member Is Offline
Mood: No Mood
|
|
sorry if this is off topic but any idea if this can be modified to produce NO?
|
|
|
hissingnoise
International Hazard
Posts: 3940
Registered: 26-12-2002
Member Is Offline
Mood: Pulverulescent!
|
|
Yes ─ Jacobs Ladder and the Birkeland-Eyde process!
Both produce higher temperature arcs . . .
|
|
|
cmos6667
Hazard to Self
Posts: 50
Registered: 10-4-2015
Member Is Offline
Mood: No Mood
|
|
Thank you, so basically you could modify an ozone generator? (Maybe higher output)
|
|
|
hissingnoise
International Hazard
Posts: 3940
Registered: 26-12-2002
Member Is Offline
Mood: Pulverulescent!
|
|
You could also check out B-E process videos on youtube . . . ?
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
