Joe Skulan
Harmless
Posts: 21
Registered: 16-3-2016
Member Is Offline
Mood: No Mood
|
|
Micro heating element?
I am looking for a tiny heating element that can reach 1000°+, something on the order of 2-3mm wide and 5mm long. I want to put it the closed end of
a quartz tube to create a “hot finger” for growing metal crystals by vapor deposition. Anyone aware of such a thing, either off the shelf or
easily home made?
Thanks
|
|
|
yobbo II
National Hazard
Posts: 709
Registered: 28-3-2016
Member Is Offline
Mood: No Mood
|
|
The elements used and sold for 'vaping' may do the job.
They are a short coil of Kanthal wire
Yob
|
|
|
Joe Skulan
Harmless
Posts: 21
Registered: 16-3-2016
Member Is Offline
Mood: No Mood
|
|
good idea-- if they get hot enough.
|
|
|
Maker
Harmless
Posts: 46
Registered: 1-11-2015
Member Is Offline
Mood: No Mood
|
|
Buy a spool of Nichrome/Kanthal wire, you can make your own heating elements in any shape or size you want, and they can run at any temperature up to
about 1400°C. The size you want won't draw much current at all, you can get away with a really simple controller (Think; Potentiometer and power
supply).
|
|
|
Joe Skulan
Harmless
Posts: 21
Registered: 16-3-2016
Member Is Offline
Mood: No Mood
|
|
Thanks. I'm surrounded by DIY vapers, so this will be easier than I thought.
|
|
|
brubei
Hazard to Others
Posts: 187
Registered: 8-3-2015
Location: France
Member Is Offline
Mood: No Mood
|
|
maybe induction
|
|
|
Oscilllator
National Hazard
Posts: 659
Registered: 8-10-2012
Location: The aqueous layer
Member Is Offline
Mood: No Mood
|
|
Maybe a cigarette lighter from an old car? They have a perfectly shaped small circular coil of wire that can get up to red heat at least.
|
|
|
Magpie
lab constructor
Posts: 5939
Registered: 1-11-2003
Location: USA
Member Is Offline
Mood: Chemistry: the subtle science.
|
|
Maybe there is something of use here: elec heated tube
The single most important condition for a successful synthesis is good mixing - Nicodem
|
|
|
3DTOPO
Hazard to Self
Posts: 64
Registered: 14-2-2016
Member Is Offline
Mood: No Mood
|
|
They sell little SiC heaters on eBay. SiC is continuously good for around 1500C.
http://www.ebay.com/itm/FF003-SIC-Hot-Surface-Ignitor-for-Rh...
http://www.ebay.com/itm/New-Ignitor-Goodman-B1401018S-B14010...
Or as suggested, induction (perhaps with a graphite inductor in your quartz tube):
http://www.amazon.com/gp/product/B017UABBQY/ref=s9_simh_gw_g...
|
|
|
3DTOPO
Hazard to Self
Posts: 64
Registered: 14-2-2016
Member Is Offline
Mood: No Mood
|
|
PS. The induction heater with graphite would be good to around 3000C, provided of course the tube is kept cool and filled with argon (not just any
inert atmosphere) or a vacuum.
|
|
|
Texium
|
Thread Moved
22-11-2023 at 20:10 |
![[*]](images/xpblue/default_icon.gif){kind=icon}
