Sciencemadness Discussion Board
Not logged in [Login ]
Go To Bottom

Printable Version  
Author: Subject: Ice and salt bath to cool to -16°C
OBLONG
Harmless
*




Posts: 8
Registered: 17-9-2016
Member Is Offline

Mood: No Mood

[*] posted on 17-9-2016 at 18:35
Ice and salt bath to cool to -16°C


Hi, what's the ratio of ice to salt to get an ice bath down to -16°C? Sorry if this is a really dumb question. Thanks
View user's profile View All Posts By User
NedsHead
Hazard to Others
***




Posts: 409
Registered: 9-12-2014
Location: South Australia
Member Is Offline

Mood: No Mood

[*] posted on 17-9-2016 at 22:14


https://en.wikipedia.org/wiki/Cooling_bath

Water and ice baths

A bath of ice and water will maintain a temperature 0 °C since the melting point of water is 0 °C. However, adding a salt such as sodium chloride will lower the temperature through the property of melting-point depression. Although the exact temperature can be hard to control, the weight ratio of salt to ice influences the temperature:

−10 °C can be achieved with a 1 to 2.5 ratio by weight of calcium chloride hexahydrate to ice.
−20 °C can be achieved with a 1 to 3 ratio by weight of sodium chloride to ice.
−40 °C can be achieved with a 1 to 0.8 ratio by weight of calcium chloride hexahydrate to ice.




View user's profile View All Posts By User
OBLONG
Harmless
*




Posts: 8
Registered: 17-9-2016
Member Is Offline

Mood: No Mood

[*] posted on 17-9-2016 at 23:04


Thank you :)
View user's profile View All Posts By User
Ashot
Hazard to Self
**




Posts: 79
Registered: 9-7-2016
Member Is Offline

Mood: No Mood

[*] posted on 18-9-2016 at 11:24


Or you can try a mix of water and isopropanol at ratio 60/40 to get a solution with -18c freezing point.
View user's profile Visit user's homepage View All Posts By User
Texium
Administrator
Thread Moved
18-9-2016 at 11:26
BromicAcid
International Hazard
*****




Posts: 3250
Registered: 13-7-2003
Location: Wisconsin
Member Is Offline

Mood: Rock n' Roll

[*] posted on 18-9-2016 at 16:09


If you are going to try this, cool both reagents as low as possible, that includes putting the salt in the freezer to start out with. The ice should be in chips, not chunks, it will slow down the process. At least those are pointers from using this mix to make iced cream.



Shamelessly plugging my attempts at writing fiction: http://www.robvincent.org
View user's profile Visit user's homepage View All Posts By User
MrHomeScientist
International Hazard
*****




Posts: 1806
Registered: 24-10-2010
Location: Flerovium
Member Is Offline

Mood: No Mood

[*] posted on 19-9-2016 at 06:46


Something I've always wondered about : Does simply mixing calcium chloride and ice result in a mixture at -40 C? What would cause the drop in temperature? I get that melting point depression makes the mix freeze at a lower temperature, but would you need supplemental cooling to actually reach -40?
View user's profile Visit user's homepage View All Posts By User
gdflp
Super Moderator
*******




Posts: 1320
Registered: 14-2-2014
Location: NY, USA
Member Is Offline

Mood: Staring at code

[*] posted on 19-9-2016 at 07:32


Quote: Originally posted by MrHomeScientist  
Something I've always wondered about : Does simply mixing calcium chloride and ice result in a mixture at -40 C? What would cause the drop in temperature? I get that melting point depression makes the mix freeze at a lower temperature, but would you need supplemental cooling to actually reach -40?
A positive enthalpy of dissolution. The salts useful in ice salt baths are both very soluble in cold water, and have a high enthalpy of dissoution. As the surface of the ice melts, the salt begins dissolving in this water, simultaneously lowering the freezing point of the water and lowering the temperature of the ice bath. Once all of the salt is dissolved, the bath will begin warming up to room temperature as a normal ice bath would. Note that with calcium chloride, only the hexahydrate salt has a positive enthalpy of dissolution, using the anhydrous salt will instead result in hot water rather than an ice bath.



View user's profile View All Posts By User
MrHomeScientist
International Hazard
*****




Posts: 1806
Registered: 24-10-2010
Location: Flerovium
Member Is Offline

Mood: No Mood

[*] posted on 19-9-2016 at 07:50


Yes I think that's where some of my confusion came from - I always think of calcium chloride as being hot when it dissolves, but I only ever use the anhydrous salt (Damp Rid). Good to know!
View user's profile Visit user's homepage View All Posts By User

  Go To Top