drzdude
Harmless
Posts: 35
Registered: 25-2-2018
Member Is Offline
Mood: No Mood
|
|
Looking to buy nitroethane
Looking for nitroethane for a synth of aminomethyl propanol, but amateur chemistry gods have to make my life hard living in the US. Anyone have some
they have no use for? Thanks!
|
|
|
Vosoryx
Hazard to Others
Posts: 282
Registered: 18-6-2017
Location: British Columbia, Canada
Member Is Offline
Mood: Serial Apple Enjoyer
|
|
http://www.sciencemadness.org/talk/viewthread.php?tid=78203#...
It's in Canada, so might be expensive shipping to the states... especially being a restricted chemical.
Hope this helps.
"Open your mind son, before someone opens it for you." - Dr. Walter Bishop
|
|
|
drzdude
Harmless
Posts: 35
Registered: 25-2-2018
Member Is Offline
Mood: No Mood
|
|
Hey I actually U2U’d him about a week ago, but thanks a lot for the help!
|
|
|
Vosoryx
Hazard to Others
Posts: 282
Registered: 18-6-2017
Location: British Columbia, Canada
Member Is Offline
Mood: Serial Apple Enjoyer
|
|
Then I don't know... Sorry. Depending on how much you need, it can be made. (But i'm almost sure it's cheaper to buy it somehow, the yields suck.)
https://erowid.org/archive/rhodium/chemistry/nitroethane.htm...
"Open your mind son, before someone opens it for you." - Dr. Walter Bishop
|
|
|
drzdude
Harmless
Posts: 35
Registered: 25-2-2018
Member Is Offline
Mood: No Mood
|
|
Yeah the yields suck and none are even OTC, was hoping for a better solution.
|
|
|
monolithic
Hazard to Others
Posts: 435
Registered: 5-3-2018
Member Is Offline
Mood: No Mood
|
|
ACRIFIX 1S0117 or 1S0116 (Google it), if you can figure out a way of separating the nitroethane.
|
|
|
Reboot
Hazard to Others
Posts: 141
Registered: 8-8-2017
Member Is Offline
Mood: No Mood
|
|
Oooh! Nice find. You'll want the 117 stuff (pure solvent, the 116 is 'thickened', probably with dissolved acrylic.) Shouldn't be too hard to
separate (fractional distillation, perhaps followed by a water wash should give a good enough product for most purposes.)
|
|
|
Magpie
lab constructor
Posts: 5939
Registered: 1-11-2003
Location: USA
Member Is Offline
Mood: Chemistry: the subtle science.
|
|
Search Klotz Nitro.
The single most important condition for a successful synthesis is good mixing - Nicodem
|
|
|
monolithic
Hazard to Others
Posts: 435
Registered: 5-3-2018
Member Is Offline
Mood: No Mood
|
|
Isn't that nitropropane?
|
|
|
Magpie
lab constructor
Posts: 5939
Registered: 1-11-2003
Location: USA
Member Is Offline
Mood: Chemistry: the subtle science.
|
|
Yes, I’m sorry.
Kiara Sky on eBay sells 15ml for $8.45 as a brush saver.
[Edited on 11-3-2018 by Magpie]
The single most important condition for a successful synthesis is good mixing - Nicodem
|
|
|
monolithic
Hazard to Others
Posts: 435
Registered: 5-3-2018
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by Magpie  | Yes, I’m sorry.
Kiara Sky on eBay sells 15ml for $8.45 as a brush saver.
[Edited on 11-3-2018 by Magpie] |
I've never sat down to price out one of the "reasonable" syntheses of nitroethane (sodium ethylsulfate procedure, I guess) but is it any cheaper/more
expensive than $8.45/15ml?
|
|
|
Mesa
Hazard to Others
Posts: 264
Registered: 2-7-2013
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by Reboot |
Oooh! Nice find. You'll want the 117 stuff (pure solvent, the 116 is 'thickened', probably with dissolved acrylic.) Shouldn't be too hard to
separate (fractional distillation, perhaps followed by a water wash should give a good enough product for most purposes.)
|
Why fractional distillation? Nitroethane has more than 25*c difference in BP to the other compounds except n-butanol. It might be easier to do
simple distillation and deal with the tiny butanol impurity if necessary.
No azeotropes to worry about either.
^^^ Referring to 0116 product.
[Edited on 12-3-2018 by Mesa]
|
|
|
nelsonB
Hazard to Self
Posts: 71
Registered: 5-9-2013
Member Is Offline
Mood: No Mood
|
|
be sure its the good one,
the quick set use nitromethane that has a lower boiling point so it set faster.
[Edited on 12-3-2018 by nelsonB]
|
|
|
drzdude
Harmless
Posts: 35
Registered: 25-2-2018
Member Is Offline
Mood: No Mood
|
|
I say distill off the nitroethane / butanol azeotrope (bp of 117.8c) and add potassium acetate to lower the volatility of the alcohol? Other than that
can’t find much literature on n-butanol forming an azeotrope with either benzene or methanol (both don’t form one with nitroethane) which could
have been useful.
| Quote: Originally posted by Mesa | | Quote: Originally posted by Reboot |
Oooh! Nice find. You'll want the 117 stuff (pure solvent, the 116 is 'thickened', probably with dissolved acrylic.) Shouldn't be too hard to
separate (fractional distillation, perhaps followed by a water wash should give a good enough product for most purposes.)
|
Why fractional distillation? Nitroethane has more than 25*c difference in BP to the other compounds except n-butanol. It might be easier to do
simple distillation and deal with the tiny butanol impurity if necessary.
No azeotropes to worry about either.
^^^ Referring to 0116 product.
[Edited on 12-3-2018 by Mesa] |
|
|
|
XeonTheMGPony
International Hazard
Posts: 1636
Registered: 5-1-2016
Member Is Offline
Mood: No Mood
|
|
https://www.acrylite-shop.com/US/us/details.htm?$product=ad3...
some thing I found when researching the stuff, handy as I do plexiglass work too! so need a good glue! 1gal for 170usd not bad at all
|
|
|
drzdude
Harmless
Posts: 35
Registered: 25-2-2018
Member Is Offline
Mood: No Mood
|
|
Yeah that’s what we’re talking about above, thanks for the info though!
|
|
|
Melgar
Anti-Spam Agent
Posts: 2004
Registered: 23-2-2010
Location: Connecticut
Member Is Offline
Mood: Estrified
|
|
Correct me if I'm wrong, but none of the other components of this stuff would seem to impede a nitroaldol reaction. Huh.
The first step in the process of learning something is admitting that you don't know it already.
I'm givin' the spam shields max power at full warp, but they just dinna have the power! We're gonna have to evacuate to new forum software!
|
|
|
drzdude
Harmless
Posts: 35
Registered: 25-2-2018
Member Is Offline
Mood: No Mood
|
|
I think you’re right, but all but n-butanol are easy to separate, and the alcohol definitely wouldn’t be an issue.
| Quote: Originally posted by Melgar | | Correct me if I'm wrong, but none of the other components of this stuff would seem to impede a nitroaldol reaction. Huh. |
|
|
|
nelsonB
Hazard to Self
Posts: 71
Registered: 5-9-2013
Member Is Offline
Mood: No Mood
|
|
Just saw the shipping price to canada of acrylite-shop.com,
International Ground (residential): 492.09 USD
this is ridiculous
[Edited on 24-3-2018 by nelsonB]
|
|
|
monolithic
Hazard to Others
Posts: 435
Registered: 5-3-2018
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by nelsonB | Just saw the shipping price to canada of acrylite-shop.com,
International Ground (residential): 492.09 USD
this is ridiculous
[Edited on 24-3-2018 by nelsonB] |
Maybe try e-mailing them? They could probably work out something cheaper than $500. It's not like you live in Borneo -- there's no reason it should be
that expensive.
|
|
|
drzdude
Harmless
Posts: 35
Registered: 25-2-2018
Member Is Offline
Mood: No Mood
|
|
Sample bottle size shipping to Pennsylvania cost me 20$, it isn't cheap unfortunately. But yes 500$ is ridiculous!
| Quote: Originally posted by monolithic | | Quote: Originally posted by nelsonB | Just saw the shipping price to canada of acrylite-shop.com,
International Ground (residential): 492.09 USD
this is ridiculous
[Edited on 24-3-2018 by nelsonB] |
Maybe try e-mailing them? They could probably work out something cheaper than $500. It's not like you live in Borneo -- there's no reason it should be
that expensive. |
|
|
|
Mush
National Hazard
Posts: 632
Registered: 27-12-2008
Member Is Offline
Mood: No Mood
|
|
https://static.summitracing.com/global/images/instructions/k...
"Contains 50% Nitropropane and 50% Koolinal as blending and cooling agents.Koolinal also resists detonation and preignition."
I couldn't find weather it is 1- or 2-nitropropane. Knowing that 2-nitropropane highly carcinogen it must be 1-NP. I don't think that 2-NP would be
allowed in the US market such a high concentration.
|
|
|
Mush
National Hazard
Posts: 632
Registered: 27-12-2008
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by Reboot |
Oooh! Nice find. You'll want the 117 stuff (pure solvent, the 116 is 'thickened', probably with dissolved acrylic.) Shouldn't be too hard to
separate (fractional distillation, perhaps followed by a water wash should give a good enough product for most purposes.)
|
ACRIFIX 1S 0116 contains ethylformate, nitroethane, butan-1-ol.
ACRIFIX 1S 0117 contains other than just ethylformate and nitroethane
Komponente CAS-Nummer Gefahrensymbol(e) / R-Sätze Gehalt
Ethylformiat 109-94-4 F, Xn 11-20/22-36/37 30,0 - 60,0 %
Nitroethan 79-24-3 Xn 10-20/22 30,0 - 60,0 %
2-Phenoxyethanol 122-99-6 Xn 22-36 3,0 - 7,0 %
Ethylacetat 141-78-6F, Xi 11-36-66-67 3,0 - 7,0 %
Butan-1-ol 71-36-3 Xn 10-22-37/38-41-67 1,0 - 5,0 %
RS Pro 250ml could be a better choice for UK users.
dichloromethane 30-70%
nitroethane 20-50 %
1-methoxy-2-propanol 5-25 %
[Edited on 13-10-2018 by Mush]
|
|
|
ntthanhbin
Harmless
Posts: 1
Registered: 4-3-2019
Member Is Offline
|
|
I wonder which make acrifix 117 is an azeotrope. Refer to TDS, I found that acrifix 117 contains less than 1% solid. Does it has hydrogen bonding?
|
|
|
zed
International Hazard
Posts: 2277
Registered: 6-9-2008
Location: Great State of Jefferson, City of Portland
Member Is Offline
Mood: Semi-repentant Sith Lord
|
|
Looking to buy? As far as I know, that's OK.
Problem is, most folks here, if they had some, would be legally prohibited from selling it to you.
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
