Sauron
International Hazard
Posts: 5351
Registered: 22-12-2006
Location: Barad-Dur, Mordor
Member Is Offline
Mood: metastable
|
|
Fluorine Generation
As a matter of curiosity, is there any laboratory method of generation of F2 other than electrolysis.
Brauer has pretty good details on a couple of different electrolytic methods but I was rather more interested in any alternative - other than buying a
lecture bottle or a cylinder, something that can't be done here without special government dispensation.
I ran across a reaction involving BrF3 and this is prepared from the elements. So far I have not found a commercial source for BrF3 either. It is a
liquid, so this is a bit surprising.
[Edited on 27-5-2007 by Sauron]
|
|
|
Oxydro
Hazard to Others
Posts: 152
Registered: 24-5-2004
Location: NS, Canada
Member Is Offline
Mood: distracted
|
|
I quote from the great Wiki:
| Quote: |
In 1986, preparing for a conference to celebrate the 100th anniversary of the discovery of fluorine, Karl Christe discovered a purely-chemical
preparation by reacting together at 150 °C solutions in anhydrous HF of K2MnF6 and of SbF5. The reaction is:
K2MnF6 + 2SbF5 → 2KSbF6 + MnF2 + F2
This is not a practical synthesis, but demonstrates that electrolysis is not essential. |
But I'm fairly sure thats not going to work for you  . I don't think you're going
to find anything "easier" than the Moissan process
"Our interest's on the dangerous side of things" -- Browning
|
|
|
Sauron
International Hazard
Posts: 5351
Registered: 22-12-2006
Location: Barad-Dur, Mordor
Member Is Offline
Mood: metastable
|
|
Interesting but 21 years old. Hasn't anyone surpassed this in two decades?
Anyway I will simply look a bit harder for the commercial source for this interhalogen (like maybe Fluorochem). Negatory with Aldrich, and Alfa. Not a
good omen.
Anyway the "great wilki" may be in error. This from the chemieonline.de webforum:
auch möglich:
K2MnF6 + 2 SbF5 --> 2 KSbF6 + MnF3 + 1/2 F2 (bei 150°C)
wobei K2MnF6 und SbF5 so hergestellt werden:
2 KMnO4 + 2 KF + 10 HF + 3 H2O2 --> 2 K2MnF6 + 8 H2O + 3 O2
SbCl5 + 5 HF --> SbF5 + 5 HCl
Quelle: RIEDEL, Anorganische Chemie, deGryter, 4. Aufl.
--------------------------------------------------------------------------------
So is it MnF2 or MnF3 and is the yield of F2 really this wretched?
[Edited on 27-5-2007 by Sauron]
|
|
|
roamingnome
Hazard to Others
Posts: 363
Registered: 9-9-2006
Member Is Offline
Mood: No Mood
|
|
MicroGen Fluorine Generators Eliminate any Supply Problems
http://www.future-fab.com/documents.asp?d_ID=1103
i think a i saw something about degrading CFC's to HF in-situ generation
|
|
|
not_important
International Hazard
Posts: 3873
Registered: 21-7-2006
Member Is Offline
Mood: No Mood
|
|
| Quote: | Originally posted by Sauron
Interesting but 21 years old. Hasn't anyone surpassed this in two decades?
Anyway the "great wilki" may be in error. This from the chemieonline.de webforum:
|
Wiki has a typo, or someone 'corrected' the 'obviously wrong' MnF3
Go here
http://classes.uleth.ca/200303/chem3810a/ps7.pdf
for a study sheet which includes a scan of Inorganic Chemistry's report of the process, along with some other interesting items.
[Edited on 27-5-2007 by not_important]
|
|
|
JohnWW
International Hazard
Posts: 2849
Registered: 27-7-2004
Location: New Zealand
Member Is Offline
Mood: No Mood
|
|
In that non-electrolytic preparation above, the F2 generated would, surely, quickly re-oxidize the MnF3 byproduct to MnF4 or higher oxidation states,
unless immediately removed. Incidentally, F2 gas is supposed to be deadly poisonous - has anyone here breathed it, and lived to tell the tale?
BTW The discovery of F2 by electrolysis of a fused salt in 1886 quickly led to the discovery that year of the electrolytic method for the smelting of
aluminium from fused purified Al2O3 and Na3AlF6 (cryolite, originally a rare mineral from Greenland), which is still used commercially today (in
places having access to relatively cheap and abundant electricity generated by hydro-power, mainly in parts of Norway, Canada, New Zealand, and
Australia).
|
|
|
Sauron
International Hazard
Posts: 5351
Registered: 22-12-2006
Location: Barad-Dur, Mordor
Member Is Offline
Mood: metastable
|
|
As that reaction is conducted in anhydrous HF and at 150 C it is perfectly clear that it is done in a F2 and HF capable pressure reactor and that once
complete the whole thing must be cooled back down to liquify the HF and only then can the F2 be isolated.
Anyway it is very clearly NOT a practical preperative method. It is a laboratory curiosity only.
|
|
|
Nerro
National Hazard
Posts: 596
Registered: 29-9-2004
Location: Netherlands
Member Is Offline
Mood: Whatever...
|
|
The preparation of F2 is done by electrolysis of liquid anhydrous HF with some KHF2 added for conductance (like putting salt in water to make it
conduct).
But what is used to make the reactor? Teflon coating? Nickel?
#261501 +(11351)- [X]
the \"bishop\" came to our church today
he was a fucken impostor
never once moved diagonally
courtesy of bash
|
|
|
Sauron
International Hazard
Posts: 5351
Registered: 22-12-2006
Location: Barad-Dur, Mordor
Member Is Offline
Mood: metastable
|
|
See Brauer's Handbook of Preparative Inorganic Chemistry for details of construction of lab scale electrolysis cell for F2 generation, also for
distillation of anhydrous HF from KHF2 (which is done in 5mm thick copper retort,)
So if you can get KHF2 you can produce anhydrous HF and with that you can obtain F2 by hydrolysis. If you dare.
1200 g KHF2 yields 250 g anhydrous HF. And HF is 95% fluorine by mass. That's about 6 mols F2.
|
|
|
Eclectic
National Hazard
Posts: 899
Registered: 14-11-2004
Member Is Offline
Mood: Obsessive
|
|
As I recall (from 30 years ago) copper works. I believe there is an apparatus design in "Inorganic Synthesis".
|
|
|
UnintentionalChaos
International Hazard
Posts: 1454
Registered: 9-12-2006
Location: Mars
Member Is Offline
Mood: Nucleophilic
|
|
There is a product floating around called armour etch glass etching cream, which I know contains at least some NaHF2 or NH4HF2. Its a shame that it's
quite expensive, although available in some craft stores, probably due to in part to hazardous materials shipping costs. An old generic MSDS I found
for Armour Products suggests a minimum of 30% fluoride compounds (up to 60%) with titanium dioxide and citric acid as the other ingredients (as well
as water, I assume)
Department of Redundancy Department - Now with paperwork!
'In organic synthesis, we call decomposition products "crap", however this is not a IUPAC approved nomenclature.' -Nicodem
|
|
|
unionised
International Hazard
Posts: 5102
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
There is a trick for getting fluorine but it' not as much use as you might think. Plasma etching gives rise to all sorts of odd reactive species, F2
and F. are among them. Only really useful for trashing things.
|
|
|
Sauron
International Hazard
Posts: 5351
Registered: 22-12-2006
Location: Barad-Dur, Mordor
Member Is Offline
Mood: metastable
|
|
At the end of the day, unless I am willing to make a serious investment in an electrolytic cell and associated equipment, and ensure I can obtain
KHF2, and built an HF still, then the proper thing for me to do is forget this whole idea and simply spend me time and money on something else.
But at least I got my question answered.
|
|
|
BromicAcid
International Hazard
Posts: 3227
Registered: 13-7-2003
Location: Wisconsin
Member Is Offline
Mood: Rock n' Roll
|
|
I've got a scan of the cell from inorganic chemistry here:
http://www.sciencemadness.org/talk/viewthread.php?tid=2358
|
|
|
vulture
Forum Gatekeeper
Posts: 3330
Registered: 25-5-2002
Location: France
Member Is Offline
Mood: No Mood
|
|
US5068127 apparently uses CrF3 as a "fluorinated vapor donor" whatever that might be...
Doesn't AgF3 decompose into AgF2 and fluorine when heated?
One shouldn't accept or resort to the mutilation of science to appease the mentally impaired.
|
|
|
Pyrovus
Hazard to Others
Posts: 241
Registered: 13-10-2003
Location: Australia, now with 25% faster carrier pigeons
Member Is Offline
Mood: heretical
|
|
CuF2 decomposes to CuF and F2 at around 1000°C or so, though this probably isn't all that practical - not to mention that I imagine fluorine would
likely be even nastier at those temperatures. I know there's a few more high oxidation metal fluorides which decompose upon heating to give fluorine,
but I can't remember them off the top of my head.
Never accept that which can be changed.
|
|
|
JohnWW
International Hazard
Posts: 2849
Registered: 27-7-2004
Location: New Zealand
Member Is Offline
Mood: No Mood
|
|
High oxidation state metal fluorides which readily thermally decompose, at various temperatures, are CrF6, AgF3, AuF5, PtF6, CuF3. There may also be
ones of Ni, Pd, Co, Rh. But they are made by methods involving, at least indirectly, the use of electrolytically produced F2, anyway.
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
