| Pages:
1
2
3 |
Sulaiman
International Hazard
Posts: 3558
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
First attempt at Li from +123 Cell
LOOK ! .... Lithium under oil !
There is a length of glass capillary tubing holding it down 
Next time I will try to get a shiny sample 
|
|
|
Abromination
Hazard to Others
Posts: 432
Registered: 10-7-2018
Location: Alaska
Member Is Offline
Mood: 1,4 tar
|
|
Energizer ultimate lithium cells only use the lithium cell to make a longer lasting battery, in this case the 1.5 volt AA, not how much power they put
out. Think about it, most people need 1.5 v batteries more than the 3v button batteries. Also, nothing is made to take 3 volts that has a place for a
AA battery and vice versa. Essentially (im rambling now, havent had my morning tea) they wantes a better AA battery.
Quote: Originally posted by Sulaiman  | LOOK ! .... Lithium under oil !
There is a length of glass capillary tubing holding it down
Next time I will try to get a shiny sample |
That isnt a fatty oil (vegetable, olive, canola oil) is it? Otherwise you have ruined your lithium and turned the oil to soap.
| Quote: Originally posted by Mr. Rogers | | Quote: Originally posted by Herr Haber | Err, paraffin wax a solvent ?
It's an interesting idea but then how do you clean your lithium from the paraffin ?
I dont doubt it can be done, just unsure how messy and efficient it'll be. |
In British English sometimes kerosene is called "paraffin" and Americans confuse this for the wax. I'm almost certain this is what's meant by keeping
Li in paraffin. |
Both should work, and I do think he meant the wax.
[Edited on 9-8-18 by Abromination]
List of materials made by ScienceMadness.org users:
https://docs.google.com/spreadsheets/d/1nmJ8uq-h4IkXPxD5svnT...
--------------------------------
Elements Collected: H, Li, B, C, N, O, Mg, Al, Si, P, S, Fe, Ni, Cu, Zn, Ag, I, Au, Pb, Bi, Am
Last Acquired: B
Next: Na
-------------- |
|
|
MrHomeScientist
International Hazard
Posts: 1806
Registered: 24-10-2010
Location: Flerovium
Member Is Offline
Mood: No Mood
|
|
Have you tested to make sure that is lithium? It looks like it sunk in that oil, unless it's stuck in the tube, and that makes me a little skeptical.
Congratulations if so!
|
|
|
Abromination
Hazard to Others
Posts: 432
Registered: 10-7-2018
Location: Alaska
Member Is Offline
Mood: 1,4 tar
|
|
| Quote: Originally posted by MrHomeScientist | | Have you tested to make sure that is lithium? It looks like it sunk in that oil, unless it's stuck in the tube, and that makes me a little skeptical.
Congratulations if so! |
He's holding it down with a glass rod.
Also, that most certainly is vegetable oil. I can see the oil around the lithium saponifying and the lithium falling apart. Also, it doesn't look like
you put the oil under vacuum first to remove the oxygen. Bad juju.
If you care for your lithium, remove it now, wash it with toluene (not water, obviously, I did that once not thinking as a beginner) and store it
under something that wont turn to soap. It wont even be useful soap, lithium soaps are only used for mechanical lubricant! It also smells like crap.
[Edited on 9-8-18 by Abromination]
[Edited on 9-8-18 by Abromination]
List of materials made by ScienceMadness.org users:
https://docs.google.com/spreadsheets/d/1nmJ8uq-h4IkXPxD5svnT...
--------------------------------
Elements Collected: H, Li, B, C, N, O, Mg, Al, Si, P, S, Fe, Ni, Cu, Zn, Ag, I, Au, Pb, Bi, Am
Last Acquired: B
Next: Na
-------------- |
|
|
Sulaiman
International Hazard
Posts: 3558
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
The 'oil' is kerosene, some old partially polymerised stuff that definitely has .
Nothing was pre-prepared, I just did it to see what will be required to do it 'properly'
Most of the corrosion is due to air, I undid the battery under kerosene,
even when oily (keroseney ?) a brief exposure to air blackens the surface.
Most of the foil remained shiny but I exposed the entire foil to air when I rolled it up to fit the test tube.
A little of the corrosion does seem due to 'stuff' in the kerosene.
(aldehydes, water, oxygen, nitrogen ?)
I initially stored the test tube upside down to keep the lithium below the kerosene,
but some small bubbles slowly formed
and I started to imagine a lithium/kerosene rocket 
Edit : Corrected the aldehyde comment
[Edited on 10-8-2018 by Sulaiman]
|
|
|
Abromination
Hazard to Others
Posts: 432
Registered: 10-7-2018
Location: Alaska
Member Is Offline
Mood: 1,4 tar
|
|
| Quote: Originally posted by Sulaiman | The 'oil' is kerosene, some old partially polymerised stuff that definitely has some aldehydes based on reaction with NaOH.
Nothing was pre-prepared, I just did it to see what will be required to do it 'properly'
Most of the corrosion is due to air, I undid the battery under kerosene,
even when oily (keroseney ?) a brief exposure to air blackens the surface.
Most of the foil remained shiny but I exposed the entire foil to air when I rolled it up to fit the test tube.
A little of the corrosion does seem due to 'stuff' in the kerosene.
(aldehydes, water, oxygen, nitrogen ?)
I initially stored the test tube upside down to keep the lithium below the kerosene,
but some small bubbles slowly formed
and I started to imagine a lithium/kerosene rocket |
Ah, my bad. It looks a lot like lithium under vegetable oil! (Cause I was stupid and did it once.) Im glad that you tried with the kerosene and
impressed at your devotion to disassembly under it! I found that you didnt have to untill you got to the point were you unroll the electrodes. Did
you experience the rotten eggs smell emitting from the iron disulfide?
List of materials made by ScienceMadness.org users:
https://docs.google.com/spreadsheets/d/1nmJ8uq-h4IkXPxD5svnT...
--------------------------------
Elements Collected: H, Li, B, C, N, O, Mg, Al, Si, P, S, Fe, Ni, Cu, Zn, Ag, I, Au, Pb, Bi, Am
Last Acquired: B
Next: Na
-------------- |
|
|
Sulaiman
International Hazard
Posts: 3558
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
I did not notice any smell at all other than kerosene.
(mostly done under kerosene in a 250ml Nalgene beaker, and I tried to avoid exposure
also, my sense of smell is not as acute as it used to be)
Thinking about it, I made another error,
- using some of the kerosene that was contaminated with electrolyte for storage.
If someone wished to use paraffin wax then I think that would be almost as easy to clean off as kerosene,
but the elevated temperature would make corrosion by the atmosphere quicker,
I guess.
P.S. After removed from argon/oil sealed 1oz. sachets I also store sodium under kerosene,
as it seems to be more stable than the vegetable oil that I first tried
[Edited on 9-8-2018 by Sulaiman]
|
|
|
symboom
International Hazard
Posts: 1143
Registered: 11-11-2010
Location: Wrongplanet
Member Is Offline
Mood: Doing science while it is still legal since 2010
|
|
I wraped mine around a copper pipe which gives it weight to push in down in the solvent. I find if i let the metal float it oxidizes quicker.how about
butane does any one know if lithium sinks in butane .248 for butane and .543 for density of lithium the butane holds well in a soda bottle
|
|
|
Abromination
Hazard to Others
Posts: 432
Registered: 10-7-2018
Location: Alaska
Member Is Offline
Mood: 1,4 tar
|
|
| Quote: Originally posted by symboom | | I wraped mine around a copper pipe which gives it weight to push in down in the solvent. I find if i let the metal float it oxidizes quicker.how about
butane does any one know if lithium sinks in butane .248 for butane and .543 for density of lithium the butane holds well in a soda bottle
|
Butane is a gas...
List of materials made by ScienceMadness.org users:
https://docs.google.com/spreadsheets/d/1nmJ8uq-h4IkXPxD5svnT...
--------------------------------
Elements Collected: H, Li, B, C, N, O, Mg, Al, Si, P, S, Fe, Ni, Cu, Zn, Ag, I, Au, Pb, Bi, Am
Last Acquired: B
Next: Na
-------------- |
|
|
symboom
International Hazard
Posts: 1143
Registered: 11-11-2010
Location: Wrongplanet
Member Is Offline
Mood: Doing science while it is still legal since 2010
|
|
This is embarrassing yes butane is a gas i ment to say methyl ether but i dont know where you would get that
Sorry butane liquifyes onder pressure thats why i mentioned a soda bottle which is designed to hold pressure to keep the buane liquid only way to get
the lithium out is by keeping it cold which is useful if you are making lithium hydride.thats how i store mine
Wish DMSO was more volitile and less dense because that would be perfect and it is a compound that is used in lithium batteries
Here is extracting lithium from lithium air button cell batteries
https://m.youtube.com/watch?v=Gc-kRTb4Dcw
Just need to hydrogenate the tithium metal
And have lithium hydride
I think powered titanium should help this process and help keep the lithium exposed to the air. And it can form titanium hydride
[Edited on 10-8-2018 by symboom]
[Edited on 10-8-2018 by symboom]
|
|
|
Sulaiman
International Hazard
Posts: 3558
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
Liquid butane from lighter refill cylinders is fairly easy to contain at RT
I use it as a dielectric in my high voltage probe,
filled once, never leaked, just a screw cap and a rubber seal.
Butt in this case I do not think that it is worth the added risk.
|
|
|
Deathunter88
National Hazard
Posts: 508
Registered: 20-2-2015
Location: Beijing, China
Member Is Offline
Mood: No Mood
|
|
I'm pretty sure it's because they use different chemistry, and hence the reason it contains lithium metal rather than just ions.
|
|
|
Abromination
Hazard to Others
Posts: 432
Registered: 10-7-2018
Location: Alaska
Member Is Offline
Mood: 1,4 tar
|
|
| Quote: Originally posted by Deathunter88 |
I'm pretty sure it's because they use different chemistry, and hence the reason it contains lithium metal rather than just ions.
|
No, they both do contain lithium metal but one is lithium and i want to say manganese dioxide and ammonium chloride and the 1.8 is carbon disulfide
and something else. I don't know maybe both are carbon disulfide. But lithium is in both.
List of materials made by ScienceMadness.org users:
https://docs.google.com/spreadsheets/d/1nmJ8uq-h4IkXPxD5svnT...
--------------------------------
Elements Collected: H, Li, B, C, N, O, Mg, Al, Si, P, S, Fe, Ni, Cu, Zn, Ag, I, Au, Pb, Bi, Am
Last Acquired: B
Next: Na
-------------- |
|
|
morganbw
National Hazard
Posts: 561
Registered: 23-11-2014
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by Abromination | | Quote: Originally posted by Deathunter88 |
I'm pretty sure it's because they use different chemistry, and hence the reason it contains lithium metal rather than just ions.
|
No, they both do contain lithium metal but one is lithium and i want to say manganese dioxide and ammonium chloride and the 1.8 is carbon disulfide
and something else. I don't know maybe both are carbon disulfide. But lithium is in both. |
I am not deep into this thread but do be aware that lithium metal batteries vs lithium-ion batteries are two very different beasts.
The first allows you to pull lithium metal out directly, the second means that if you are not a wizard, you will get exactly zero lithium metal.
|
|
|
Abromination
Hazard to Others
Posts: 432
Registered: 10-7-2018
Location: Alaska
Member Is Offline
Mood: 1,4 tar
|
|
| Quote: Originally posted by morganbw | | Quote: Originally posted by Abromination | | Quote: Originally posted by Deathunter88 |
I'm pretty sure it's because they use different chemistry, and hence the reason it contains lithium metal rather than just ions.
|
No, they both do contain lithium metal but one is lithium and i want to say manganese dioxide and ammonium chloride and the 1.8 is carbon disulfide
and something else. I don't know maybe both are carbon disulfide. But lithium is in both. |
I am not deep into this thread but do be aware that lithium metal batteries vs lithium-ion batteries are two very different beasts.
The first allows you to pull lithium metal out directly, the second means that if you are not a wizard, you will get exactly zero lithium metal.
|
Good point. I am unfortunately not a wizard. I thought he was talking about the 3v lithium button batteries.
List of materials made by ScienceMadness.org users:
https://docs.google.com/spreadsheets/d/1nmJ8uq-h4IkXPxD5svnT...
--------------------------------
Elements Collected: H, Li, B, C, N, O, Mg, Al, Si, P, S, Fe, Ni, Cu, Zn, Ag, I, Au, Pb, Bi, Am
Last Acquired: B
Next: Na
-------------- |
|
|
symboom
International Hazard
Posts: 1143
Registered: 11-11-2010
Location: Wrongplanet
Member Is Offline
Mood: Doing science while it is still legal since 2010
|
|
Wow thats alot of inquotes its pure lithium metal you can scrape it off with a screwdriver it acts like clay except when it is on fire.
It is really stuck to the inside casing atleast the casing holds the lithium under mineral oil.
Im surprised others dont use 3v lithium button batterys
Not much lithium but it is a great sample size
nail clipers can be used to pry open lithium button batteries takes some practice but it only takes a few seconds and tge lithium is out.
[Edited on 12-8-2018 by symboom]
|
|
|
Abromination
Hazard to Others
Posts: 432
Registered: 10-7-2018
Location: Alaska
Member Is Offline
Mood: 1,4 tar
|
|
| Quote: Originally posted by symboom | Wow thats alot of inquotes its pure lithium metal you can scrape it off with a screwdriver it acts like clay except when it is on fire.
It is really stuck to the inside casing atleast the casing holds the lithium under mineral oil.
Im surprised others dont use 3v lithium button batterys
Not much lithium but it is a great sample size
nail clipers can be used to pry open lithium button batteries takes some practice but it only takes a few seconds and tge lithium is out.
[Edited on 12-8-2018 by symboom] |
Button batteries are the first kind I ever dismantled. Agreed, a good sample size.
List of materials made by ScienceMadness.org users:
https://docs.google.com/spreadsheets/d/1nmJ8uq-h4IkXPxD5svnT...
--------------------------------
Elements Collected: H, Li, B, C, N, O, Mg, Al, Si, P, S, Fe, Ni, Cu, Zn, Ag, I, Au, Pb, Bi, Am
Last Acquired: B
Next: Na
-------------- |
|
|
Sulaiman
International Hazard
Posts: 3558
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
Although under oil in a test tube with a (not perfectly sealing) stopper,
my lithium sample shown at the top of this page is corroding away 
I am glad that I kept the rest of the batteries intact 
Would some kind person please suggest an easy interesting use for the
foil from one cell ?
or
a lithium salt suitable for storage and future use ?
|
|
|
fusso
International Hazard
Posts: 1922
Registered: 23-6-2017
Location: 4 ∥ universes ahead of you
Member Is Offline
|
|
| Quote: Originally posted by Sulaiman | Although under oil in a test tube with a (not perfectly sealing) stopper,
my lithium sample shown at the top of this page is corroding away
I am glad that I kept the rest of the batteries intact
Would some kind person please suggest an easy interesting use for the
foil from one cell ?
or
a lithium salt suitable for storage and future use ? |
Dismantle the cells just before you need it? Like
making LDA, Li alkoxides & RLi?
Or make LiOH/Li2CO3?
|
|
|
CrimsonRed
Harmless
Posts: 13
Registered: 6-12-2018
Member Is Offline
|
|
I remember getting some lithium out of a button battery and it was very exciting, I remember looking up the lithium content for each type of button
cell and I ended up concluding that CR2032 (contains any where from 0.05g to 0.07g of lithium metal) was the most common and the most cost effective
one but recently I found that you could buy a pack of 10 CR2477 (contains 0.25g to 0.30g) for about 6$ on aliexpress which is very cost effective
although you do have to wait for like 20-30 days for it to arrive, I might buy it
|
|
|
Ubya
International Hazard
Posts: 1232
Registered: 23-11-2017
Location: Rome-Italy
Member Is Offline
Mood: I'm a maddo scientisto!!!
|
|
| Quote: Originally posted by CrimsonRed | | I remember getting some lithium out of a button battery and it was very exciting, I remember looking up the lithium content for each type of button
cell and I ended up concluding that CR2032 (contains any where from 0.05g to 0.07g of lithium metal) was the most common and the most cost effective
one but recently I found that you could buy a pack of 10 CR2477 (contains 0.25g to 0.30g) for about 6$ on aliexpress which is very cost effective
although you do have to wait for like 20-30 days for it to arrive, I might buy it |
30$ for 1g doesn't seem that cost effective... you can buy it on ebay 15.50$ for 20g
---------------------------------------------------------------------
feel free to correct my grammar, or any mistakes i make
---------------------------------------------------------------------
|
|
|
CrimsonRed
Harmless
Posts: 13
Registered: 6-12-2018
Member Is Offline
|
|
Well when you get roughly 2.5 to 3 grams for 6$, 6$ for a pack of 10 cells and I've seen a few people who bought lithium from ebay which came oxidized
and stuff, also I said It was cost effective when I found out that cr2032 was the cheapest at the time a few years ago as they were the cheapest (I
think like 2-3$ for a pack of 10 or something like that) but not any more now that they have the CR2477 selling in a pack of 10 for only 6$ and each
cell atleast contains a minimum of 0.25 grams. Also they are on aliexpress just so you know.
I don't think I can buy lithium metal directly from ebay without getting into some trouble unless they mask the lithium into some other item so that
it can pass through customs easily. It did happen with my magnesium rods that I ordered from dhgate that were labelled as clothes.
[Edited on 9-12-2018 by CrimsonRed]
|
|
|
Ubya
International Hazard
Posts: 1232
Registered: 23-11-2017
Location: Rome-Italy
Member Is Offline
Mood: I'm a maddo scientisto!!!
|
|
even if half of the lithium from ebay was oxide it would still be better than extracting it from batteries. as for problems with customs i didn't know
lithium could be a problem, maybe because it could be used to make meth
---------------------------------------------------------------------
feel free to correct my grammar, or any mistakes i make
---------------------------------------------------------------------
|
|
|
CrimsonRed
Harmless
Posts: 13
Registered: 6-12-2018
Member Is Offline
|
|
well the thing is its a 50 / 50 that u even get some form of lithium, half the time its not even lithium and u can find some posts that question ebay
seller's quality, i think the batteries are a safer alternative
|
|
|
Ubya
International Hazard
Posts: 1232
Registered: 23-11-2017
Location: Rome-Italy
Member Is Offline
Mood: I'm a maddo scientisto!!!
|
|
if you buy from ebay and get scammed you can ask a refund, maybe the seller will cooperate, if not just ask ebay directly, i got a refund for table
salt sold as potassium iodide, the seller proposed to refund me just 2$ out of 6$ that i paid, i asked ebay and got full refund in less than a day
---------------------------------------------------------------------
feel free to correct my grammar, or any mistakes i make
---------------------------------------------------------------------
|
|
|
| Pages:
1
2
3 |
![[*]](images/xpblue/default_icon.gif){kind=icon}
