Sciencemadness Discussion Board
Not logged in [Login ]
Go To Bottom

Printable Version  
Author: Subject: Metabisulfite for Bisulfite Adduct Discussion
Mothman
Harmless
*




Posts: 42
Registered: 26-9-2017
Member Is Offline

Mood: Aminated

[*] posted on 18-8-2018 at 06:53
Metabisulfite for Bisulfite Adduct Discussion


I know that Metabisulfite and Bisulfite are not the same compounds, however, I would like to discuss how they are similar or different in solution as I'd like to use the Metabisulfite to purify some THF that I distilled out of PVC primer.

Here is what I know:
In solution, Sodium Metabisulfite exists as sulfur dioxide (SO2) and sodium sulfite (Na2SO3).
I know that to form a bisulfite adduct with a ketone (acetone and MEK), I need the bisulfite (HSO3-) anion.

Now, my question is this: Could I just dissolve the metabisulfite in water and use it as is in the hopes that water causes the sulfite to become bisulfite in small amounts? The reaction would obviously be very slow if it occurred at all, but the equilibrium would be shifted to favor products as the ketones would react continuously and readily.

If I can't just add the metabisulfite solution to the crude THF, would acidifying the solution work to form the bisulfite anion in solution or would I just get a bunch of sulfur dioxide?

Help would be appreciated, I haven't been able to find much info on this subject which strikes me as odd because it's not easy to get THF from anywhere but pvc primer these days, and an OTC way of chemically purifying it after distillation ought to be at least a somewhat discussed topic on this board. Anyways, help would be appreciated, thank you to everyone who took the time to read this.




You can be happy
View user's profile View All Posts By User
happyfooddance
International Hazard
*****




Posts: 521
Registered: 9-11-2017
Location: Los Angeles, Ca.
Member Is Offline

Mood: No Mood

[*] posted on 18-8-2018 at 08:28


Metabisulfite hydrolyses to bisulfite very rapidly and completely in aqueous solutions. 1 mol metabisulfite forms 2 mol bisulfite. Also, it isn't just the bisulfite anion that is needed, the cation is also part of the adduct. What I want to know is why you think THF will form an adduct, seeing as it is an ether, and not a ketone or aldehyde...

Also, acidic or basic impurities (like your suggestion of acidifying the solution) will interfere with formation of the adduct.

[Edited on 8-18-2018 by happyfooddance]
View user's profile View All Posts By User
happyfooddance
International Hazard
*****




Posts: 521
Registered: 9-11-2017
Location: Los Angeles, Ca.
Member Is Offline

Mood: No Mood

[*] posted on 18-8-2018 at 09:19


That's actually a really good post, PhDchemist. Didn't you say that you got some metabisulfite in your eye or something once?

[Edited on 8-18-2018 by happyfooddance]
View user's profile View All Posts By User
JJay
International Hazard
*****




Posts: 3417
Registered: 15-10-2015
Member Is Offline


[*] posted on 18-8-2018 at 09:56


This procedure won't work with THF because it's not an aldehyde or methyl ketone. I don't think it will work with cyclohexanone, but I've never tried it. The acetone bisulfite adduct is pretty water soluble... not sure about the methyl ethyl ketone adduct.

I'd check Amarego's Purification of Laboratory Chemicals for details on how to purify THF.




View user's profile View All Posts By User
mackolol
National Hazard
****




Posts: 430
Registered: 26-10-2017
Location: Poland
Member Is Offline

Mood: Psychedelic

[*] posted on 19-8-2018 at 06:54


I think he wants to get rid of ketones in his thinner and leave unreacted thf JJay
View user's profile View All Posts By User
unionised
International Hazard
*****




Posts: 4505
Registered: 1-11-2003
Location: UK
Member Is Offline

Mood: No Mood

[*] posted on 19-8-2018 at 07:27


Metabisulphite will react with hydroxide to form sulphite.
View user's profile View All Posts By User
JJay
International Hazard
*****




Posts: 3417
Registered: 15-10-2015
Member Is Offline


[*] posted on 19-8-2018 at 09:44


Quote: Originally posted by mackolol  
I think he wants to get rid of ketones in his thinner and leave unreacted thf JJay


Oh, that makes more sense. Hmm...

Bisulfite and metabisulfite are the same thing in solution; bisulfite is essentially metabisulfite that has reacted with a water molecule.

I'm not seeing any reason that it wouldn't be possible to form a bisulfite adduct with MEK and acetone with sodium sulfite at the right pH and then distill off the THF.





View user's profile View All Posts By User
Mothman
Harmless
*




Posts: 42
Registered: 26-9-2017
Member Is Offline

Mood: Aminated

[*] posted on 19-8-2018 at 11:52


Thank you guys for all of the responses, I do just want to form the ketone/bisulfite adduct of the impurities and then distill off the purified THF, I understand that it's just aldehydes and ketones that are affected by bisulfite :P

I was confused about the hydrolysis of metabisulfite because I had read that it produced sulfite and SO2 and not two bisulfites, but I am no longer confused and if people find themselves in a similar rut as I they can locate this thread. Thank you all!




You can be happy
View user's profile View All Posts By User
Mothman
Harmless
*




Posts: 42
Registered: 26-9-2017
Member Is Offline

Mood: Aminated

[*] posted on 19-8-2018 at 12:06


Oh, one other thing,
On the rhodium archive I read that PCP cooks use a bisulfite adduct of cyclohexanone for making PCP, so bisulfite should clear out any cyclohexanone from my primer as well. I did fractionate out the THF already so there should be almost no cyclohexanone in the current product but it never hurts to make sure with a bisulfite treatment. I plan to use the THF for my first grignard reaction, I already bought some BHT for stabilizing it for long-term storage, this should be fun!




You can be happy
View user's profile View All Posts By User
JJay
International Hazard
*****




Posts: 3417
Registered: 15-10-2015
Member Is Offline


[*] posted on 19-8-2018 at 12:31


Quote: Originally posted by Mothman  
Oh, one other thing,
On the rhodium archive I read that PCP cooks use a bisulfite adduct of cyclohexanone for making PCP, so bisulfite should clear out any cyclohexanone from my primer as well. I did fractionate out the THF already so there should be almost no cyclohexanone in the current product but it never hurts to make sure with a bisulfite treatment. I plan to use the THF for my first grignard reaction, I already bought some BHT for stabilizing it for long-term storage, this should be fun!


Oh cool. I just ran across this: https://the-hive.archive.erowid.org/forum/showflat.pl?static... So it does work with cyclohexanone.






View user's profile View All Posts By User
Fyndium
International Hazard
*****




Posts: 561
Registered: 12-7-2020
Location: Not in USA
Member Is Offline


[*] posted on 28-7-2020 at 04:59


I have denatured ethanol of about 95% abv that contains 2% of MEK. Could bisulfite be dissolved in the remaining water directly in order to react with the MEK to not dilute the ethanol itself, and will it precipitate or should it be distilled directly? Does adduct withstand prolonged heating?
View user's profile View All Posts By User
draculic acid69
International Hazard
*****




Posts: 992
Registered: 2-8-2018
Member Is Offline


[*] posted on 9-10-2020 at 13:05


Quote: Originally posted by Mothman  
Oh, one other thing,
On the rhodium archive I read that PCP cooks use a bisulfite adduct of cyclohexanone for making PCP, so bisulfite should clear out any cyclohexanone from my primer as well. I did fractionate out the THF already so there should be almost no cyclohexanone in the current product but it never hurts to make sure with a bisulfite treatment. I plan to use the THF for my first grignard reaction, I already bought some BHT for stabilizing it for long-term storage, this should be fun!
I


I've distilled thf from the PVC glue and density was dead on and the ketone and thf seemed to seperate cleanly with no problems and that was with a teapot w/copper tube on a portable hotplate.how much contamination do you think you have coz if carefully done it should be very close but if using in a sensitive rxn like a grignard I see your reasoning

[Edited on 9-10-2020 by draculic acid69]

[Edited on 9-10-2020 by draculic acid69]
View user's profile View All Posts By User
draculic acid69
International Hazard
*****




Posts: 992
Registered: 2-8-2018
Member Is Offline


[*] posted on 9-10-2020 at 14:28


Quote: Originally posted by Fyndium  
I have denatured ethanol of about 95% abv that contains 2% of MEK. Could bisulfite be dissolved in the remaining water directly in order to react with the MEK to not dilute the ethanol itself, and will it precipitate or should it be distilled directly? Does adduct withstand prolonged heating?


I'd be more concerned with so2.Left in the alcohol
View user's profile View All Posts By User
Antigua
Hazard to Self
**




Posts: 90
Registered: 27-9-2020
Member Is Offline


[*] posted on 9-10-2020 at 14:32


If the SO2 evolution turns out to be too much, you can just neutralize it with a non-volatile base and redistill the alcohol.
View user's profile View All Posts By User
draculic acid69
International Hazard
*****




Posts: 992
Registered: 2-8-2018
Member Is Offline


[*] posted on 10-10-2020 at 07:43


Justt destroy the ketone with caustic and avoid trying, failing,getting itchy &sick from breathing so2 and getting annoyed that U tried to use metabisulfite instead of caustic soda.
View user's profile View All Posts By User

  Go To Top