Pages:
1
..
18
19
20
21
22
..
60 |
blargish
Hazard to Others
Posts: 166
Registered: 25-9-2013
Location: Canada
Member Is Offline
Mood: Mode Push
|
|
Ontario... I asked the guy at Canadian Tire and found some in the back. Apparently they don't put it on the shelf anymore. I did, however, buy a litre
of it off the shelf at a Home Depot
[Edited on 23-11-2013 by blargish]
|
|
sbbspartan
Hazard to Self
Posts: 61
Registered: 6-3-2012
Location: Minnesota, USA
Member Is Offline
Mood: DEAD (diethyl azodicarboxylate)
|
|
@Mailinmypocket
Down here in Minnesota, I can usually find MEK in the solvents section of local hardware stores fairly easily.
From Elemental Scientific:
acetic anhydride,
aluminum potassium sulfate
ammonium biflouride
ammonium dichromate
sodium silicate
cadmium metal
calcium fluoride
camphor
chromium metal
phthalic anhydride
salicylic acid
nitric acid
various bottles and supplies
|
|
Pyro
International Hazard
Posts: 1305
Registered: 6-4-2012
Location: Gent, Belgium
Member Is Offline
Mood: No Mood
|
|
not really chemical, but lab related.
I got the PDF online and then got it printed and bound for a mere 36EUR. now I don't need to fool around with those irritating PDF's
all above information is intellectual property of Pyro.
|
|
Zephyr
Hazard to Others
Posts: 341
Registered: 30-8-2013
Location: Seattle, WA
Member Is Offline
|
|
my last chemical order:
2g tellurium metal
100g phthalic anhydride
20g rescourcinol
25g silver carbonate
50g barium nitrate
500ml formic acid
100ml Pyridine
50ml benzene
100g sodium sulfate
25g Lithium Hydride
30g silicon powder
|
|
Pyro
International Hazard
Posts: 1305
Registered: 6-4-2012
Location: Gent, Belgium
Member Is Offline
Mood: No Mood
|
|
just stopped by the pharmacy to get some diethyl ether.
19.80 EUR for 1l.
It is however not dry, so you need to either put Na in it or redistill it.
they will also sell CHCl3 OTC, but it's 80EUR/l or 30EUR for 250ml
all above information is intellectual property of Pyro.
|
|
elementcollector1
International Hazard
Posts: 2684
Registered: 28-12-2011
Location: The Known Universe
Member Is Offline
Mood: Molten
|
|
Source?
Elements Collected:52/87
Latest Acquired: Cl
Next in Line: Nd
|
|
ChemSwede
Harmless
Posts: 26
Registered: 20-8-2013
Location: Sweden
Member Is Offline
Mood: No Mood
|
|
My last order arrived a week ago:
Magnesiumpowder, 1kg
Potassium bromide, 500g - will be used to isolate bromine
Urea, 500g
Red phosphorus, 1kg
Plus various glassware from a chinese Ebay-seller.
|
|
Pyro
International Hazard
Posts: 1305
Registered: 6-4-2012
Location: Gent, Belgium
Member Is Offline
Mood: No Mood
|
|
I had an OTC frenzy.
5l acetone
5l MeOH
5l 23% HCl (For cleaning)
5l of NaOCl to titrate (2,5%) to make CHCl3 (0.90eur/5l. I am going to need about 150l to get a bit over a liter of CHCl3 for 45 eur!)
and from the gouden pluim:
1Kg anh. AlCl3
1Kg urea
100g Na2S2O3
2l 37% HCl
[Edited on 28-12-2013 by Pyro]
all above information is intellectual property of Pyro.
|
|
Zyklon-A
International Hazard
Posts: 1547
Registered: 26-11-2013
Member Is Offline
Mood: Fluorine radical
|
|
From Skylighter:
2lbs Potassium Perchlorate,
1lb Potassium Chlorate,
1lb Barium Nitrate Powder,
1lb Strontium Nitrate,
5lbs Al powder 1200 mesh,
65ft Cross-Match Visco Fuse.
From Elemental Scientific:
Acetic anhydride,
More Al powder,
98%Sulfuric acid,
35%H2O2,
More Potassium Chlorate,
More Potassium Perchlorate.
|
|
hyfalcon
International Hazard
Posts: 1003
Registered: 29-3-2012
Member Is Offline
Mood: No Mood
|
|
Latest from Alpha Chemical:
50 Pounds - Red Iron Oxide
10 Pounds - Citric Acid - Anhydrous
50 Pounds - Potassium Sulfate (Sulfate of Potash)
55 Pounds - Anhydrous Magnesium Sulfate
50 Pounds - Calcium Sulfate Dihydrate
5 Pound Aluminum Powder - 30 Micron
I've got plenty if anyone needs some. U2U me if interested. I can beat Skylighter's prices to pieces. Aluminum is for the next round of thermite
experiments.
|
|
Zyklon-A
International Hazard
Posts: 1547
Registered: 26-11-2013
Member Is Offline
Mood: Fluorine radical
|
|
I got my Al powder for free from skylighter, they had a deal where if you spent $60 they would give you 5lbs Al free! Money well spent.
|
|
woelen
Super Administrator
Posts: 8020
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
From a Polish eBay seller:
- ethanol amine: NH2CH2CH2OH, a colorless liquid, somewhat more viscous, like water
- diethanol amine: NH(CH2CH2OH)2, a colorless liquid, a little more viscous than conc. H2SO4
- triethanol amine: N(CH2CH2OH)3, a colorless liquid, extremely viscous, like a syrup.
- propionyl chloride
- dimethylformamide
The ethanol amines I want to use in ester-experiments with nitrous acid and maybe some other acids as well. The propionyl chloride I purchased,
because I could. It most likely is a one-time occasion, which I could not let go by.
The dimethylformamide is said to be useful in making dimethylamine. I tried that already with NaOH and water, but the reaction is not as smooth as I
hoped. Maybe someone else can comment on that.
|
|
blargish
Hazard to Others
Posts: 166
Registered: 25-9-2013
Location: Canada
Member Is Offline
Mood: Mode Push
|
|
Dropped by Canadian Tire to pick up some standard stuff.
1L Methanol
1kg Copper Sulfate Pentahydrate
450g Sodium Hydroxide
400g Trisodium Phosphate
1kg Calcium Chloride Anhydrous
Also, this Rust Remover that claims to be 30-60% Sodium Dithionite and 40-70% Sodium Metabisulfite
|
|
Zyklon-A
International Hazard
Posts: 1547
Registered: 26-11-2013
Member Is Offline
Mood: Fluorine radical
|
|
Dang, Calcium Chloride Anhydrous is rather expensive, ~$25.23 for 100 grams=$250 for 1Kg
|
|
blargish
Hazard to Others
Posts: 166
Registered: 25-9-2013
Location: Canada
Member Is Offline
Mood: Mode Push
|
|
I got mine for about $15 as a dehumidifier refill.
Consultation with the MSDS says that it's practically pure Calcium Chloride.
[Edited on 20-1-2014 by blargish]
|
|
Zyklon-A
International Hazard
Posts: 1547
Registered: 26-11-2013
Member Is Offline
Mood: Fluorine radical
|
|
$15 for 1Kg, that's a great price.... I guess it's a lot more expensive for the 'lab grade stuff'.
|
|
woelen
Super Administrator
Posts: 8020
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
I indeed buy anhydrous CaCl2 by the kilo in a hardware store, for just a few euros per kilo. It is good enough for drying purposes and for basic
experiments with calcium salts. Solutions of it are somewhat opalescent, but if I want to experiment with that, I dissolve some in water and set it
aside. The next day, there is a perfectly clear colorless solution above a thin layer of pale brown solid matter. With a syringe I carefully suck away
the clear liquid and the last 10% or so I discard (this can be done, because it is so cheap).
|
|
sasan
Hazard to Self
Posts: 92
Registered: 22-2-2014
Location: TEHRAN / IRAN
Member Is Offline
Mood: Radiative
|
|
I recently purchased 2/5L of teterachloroethylene C2Cl4 for solving iodine and trying to solve sulfur too
1Kg of K2HPO4 merck and 1Kg of russian Cr(OH)3 to produce chromium compounds
|
|
Mailinmypocket
International Hazard
Posts: 1351
Registered: 12-5-2011
Member Is Offline
Mood: No Mood
|
|
I was recently given around 500g or resorcinol and a bottle of "potassium bromide salt". This was from another home chemist who was getting rid of
their stuff. I thought the "potassium bromide salt" was KBr but it most obviously isn't. Upon adding some ~50% H2SO4 there is an
immediate production of bromine fumes and after a few minutes there is a large blob of elemental bromine accumulated under the undissolved salt. What
could this stuff be? BCDMH?
This person has severe chemical labeling issues apparently.
[Edited on 23-2-2014 by Mailinmypocket]
|
|
plante1999
International Hazard
Posts: 1936
Registered: 27-12-2010
Member Is Offline
Mood: Mad as a hatter
|
|
Maybe potassium bromate? or bromate and bromide salt mix?
I'm not too good at putting label too, I would have to be there if someone was to get my chem, else then that, about 15% would be unlabeled. I
generally put label in the summer, and in the winter I write the molecualr formula on the bottle.
I never asked for this.
|
|
Metacelsus
International Hazard
Posts: 2539
Registered: 26-12-2012
Location: Boston, MA
Member Is Offline
Mood: Double, double, toil and trouble
|
|
I would guess they reacted bromine with potassium hydroxide, producing a mixture of bromide and bromate. Acidification of this mixture will produce
bromine.
|
|
Mailinmypocket
International Hazard
Posts: 1351
Registered: 12-5-2011
Member Is Offline
Mood: No Mood
|
|
That could be, but the amount is ridiculous, something like 3 kilos... ThTs a lot of bromine to waste- or dispose of I guess. Also, it is not of
"salt" consistency like the reagent grade KBr I have, it is a very fine powder clumped together reminiscent of corn starch but denser.
|
|
forgottenpassword
Hazard to Others
Posts: 374
Registered: 12-12-2013
Member Is Offline
Mood: No Mood
|
|
Sulphuric acid can oxidize bromide to bromine. http://www.youtube.com/watch?v=QkTu7yKSyzg
|
|
Mailinmypocket
International Hazard
Posts: 1351
Registered: 12-5-2011
Member Is Offline
Mood: No Mood
|
|
I shall take photos later to demonstrate the difference. When a spatula of KBr is added to one test tube and a spatula of this unknown material is
added to another, 4ml water added to each and then 4-5 drops concentrated sulfuric acid added to each there is a clear difference. The liquid in the
KBr tube becomes orange, and that's about it. The other tube however becomes orange and then quickly the air in the tube becomes orange with Br vapor
and eventually a drop of Br forms.
I read about BCDMH and it states that it has a slightly acetone odor, this stuff does. I think it may be that...
|
|
Metacelsus
International Hazard
Posts: 2539
Registered: 26-12-2012
Location: Boston, MA
Member Is Offline
Mood: Double, double, toil and trouble
|
|
Try dissolving it in an organic solvent.
|
|
Pages:
1
..
18
19
20
21
22
..
60 |