Difference between revisions of "Hydroiodic acid"
Line 35: | Line 35: | ||
=== Disposal === | === Disposal === | ||
− | Hydroiodic acid should be neutralized before disposal. Any non-toxic base can be used. Reducing agents, like sodium thiosulfate or metabisulfite can | + | Hydroiodic acid should be neutralized before disposal. Any non-toxic base can be used. Reducing agents, like sodium thiosulfate or metabisulfite can be used to neutralize any iodine traces resulting from the decomposition of HI. |
==References== | ==References== |
Revision as of 19:58, 19 November 2015
Hydroiodic acid is an unstable, very strong hydrohalic acid, formed by dissolution of hydrogen iodide in water. Pure hydroiodic acid is colorless, but it is very hard to obtain a pure sample and keep it pure, because it easily decomposes, liberating elemental iodine and forming the very unstable hydrotriiodic acid. In practice, solutions of hydroiodic acid are typically yellow or brown. It is one of the strongest mineral acids.
Contents
Properties
Physical
The physical properties of hydroiodic acid vary depending on its concentration. Azeotropic hydroiodic acid contains 57% HI and boils at 127°C. More common is 45% hydroiodic acid, which has a density of 1,48 g/cm3.
Chemical properties
Hydroiodic acid is a very strong acid and a highly potent reducing agent. It is also used as a iodinating agent.
Availability and Sources
Hydroiodic acid is sometimes available in chemical reagent stores, but this availability varies because of the acid's use in drug synthesis. In USA it is classified as DEA List I chemical. It is not used in any household chemicals.
Preparation
Hydroiodic acid is the most elusive hydrohalic acid, it generally cannot be prepared in satisfying amount by reactions of other strong acids and iodide salts. Only certain acids suchs as phosphoric acid or hydrogen sulfide can be used to produce hydroiodic acid with this method. Hydrogen iodide can also be obtained from the reaction of hydrogen sulfide with elemental iodine. Most strong acids, such as sulfuric acid will oxidize iodide salts to elemental iodine, and as such cannot be used.
Other methods used are the hydrolysis of phosphorus triiodide or aluminium iodide.
Handling
Safety
Hydroiodic acid is a very strong, corrosive acid. It is mostly non-toxic. However, protective gear is advised when handling it. Concentrated solutions release corrosive fumes.
Legality
Like many strong reducing agents, hydroiodic acid is a controlled substance in many countries, because it is used in illegal production of metamphetamine. In the US, it's a DEA List I chemical.
Storage
Hydroiodic acid must be stored in a dark place, in bottles of dark glass, sealed from access to atmospheric oxygen.
Disposal
Hydroiodic acid should be neutralized before disposal. Any non-toxic base can be used. Reducing agents, like sodium thiosulfate or metabisulfite can be used to neutralize any iodine traces resulting from the decomposition of HI.