Difference between revisions of "Boiling chip"

From Sciencemadness Wiki
Jump to: navigation, search
 
(4 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
{{Stub}}
 
{{Stub}}
 +
[[File:Pumice boiling chips.jpg|thumb|[[Pumice]] boiling stones.]]
 
A '''boiling chip''', also known as '''boiling stone''', or '''anti-bumping granule''' is an unevenly shaped rough granular material added to liquids to make them boil more calmly.
 
A '''boiling chip''', also known as '''boiling stone''', or '''anti-bumping granule''' is an unevenly shaped rough granular material added to liquids to make them boil more calmly.
  
Line 12: Line 13:
  
 
==DIY boiling chips==
 
==DIY boiling chips==
The easiest and cheapest way to make boiling chips is to smash porcelain or similar ceramic materials into small bits. Avoid using glazed ceramic, as it doesn't have rough surface necessary for nucleation. Broken shards of sintered glass frit, as used in filtration, is also effective.
+
The easiest and cheapest way to make boiling chips is to smash porcelain or similar ceramic materials into small bits. Avoid using glazed ceramic, as it doesn't have rough surface necessary for nucleation. Broken pieces of sintered glass frit, as used in filtration, can also be used as boiling stones, though best to avoid using them in strongly alkaline solutions, as they will dissolve.
  
Glass shards or quartz pieces can be used, but because the surface of these materials is smooth they are not suitable untreated. To make their surface rough, there are two ways: sandpaper the glass/quartz surface using a very abrasive material ([[Silicon carbide|SiC]], [[Tungsten carbide|WC]], diamond, etc.) to make it rough, or chemical treatment using [[hydrofluoric acid]] or hot aq. alkali ([[sodium hydroxide]], [[potassium hydroxide]]).
+
Glass shards or quartz pieces can be used, but because the surface of these materials is smooth and not rough, they are not suitable. To make their surface rough, there are two ways: sandpaper the glass/quartz surface using a very abrasive material ([[Silicon carbide|SiC]], [[Tungsten carbide|WC]], diamond, etc.) to make it rough, or chemical treatment using [[hydrofluoric acid]] or hot aq. alkali ([[sodium hydroxide]], [[potassium hydroxide]]).
  
[[Silica gel]] can also be used as boiling stones.
+
[[Silica gel]] can also be used as boiling stones, though it may burst at high temperatures.
  
Chemically cleaned sand can also be used when distilling liquids that tend to bump violently.
+
Chemically cleaned sand can also be used when distilling liquids that tend to bump violently such as [[sulfuric acid]].
  
 
==Projects==
 
==Projects==
 
*Anti-bumping material during distillation
 
*Anti-bumping material during distillation
 +
*Abrasive
  
 
==Safety==
 
==Safety==

Latest revision as of 21:15, 15 August 2020

Pumice boiling stones.

A boiling chip, also known as boiling stone, or anti-bumping granule is an unevenly shaped rough granular material added to liquids to make them boil more calmly.

Function

Boiling chips are frequently employed in distillation and heating. When a liquid becomes superheated, a particle of dust or a stirring rod can cause flash boiling. This very rapid boiling can be extremely violent and cause reagents to splatter, possibly causing severe burns, ruining experiments, and damaging equipment. Boiling chips work by providing nucleation sites so the liquid boils smoothly without becoming superheated or bumping.

Properties

Boiling chips are made of a chemically inert material, like glass, quartz, or calcinated porcelain. They appear like flakes or beads, with a rough surface, necessary for nucleation.

Availability

Boiling chips can be purchased from lab suppliers. They are available as either glass or ceramic.

DIY boiling chips

The easiest and cheapest way to make boiling chips is to smash porcelain or similar ceramic materials into small bits. Avoid using glazed ceramic, as it doesn't have rough surface necessary for nucleation. Broken pieces of sintered glass frit, as used in filtration, can also be used as boiling stones, though best to avoid using them in strongly alkaline solutions, as they will dissolve.

Glass shards or quartz pieces can be used, but because the surface of these materials is smooth and not rough, they are not suitable. To make their surface rough, there are two ways: sandpaper the glass/quartz surface using a very abrasive material (SiC, WC, diamond, etc.) to make it rough, or chemical treatment using hydrofluoric acid or hot aq. alkali (sodium hydroxide, potassium hydroxide).

Silica gel can also be used as boiling stones, though it may burst at high temperatures.

Chemically cleaned sand can also be used when distilling liquids that tend to bump violently such as sulfuric acid.

Projects

  • Anti-bumping material during distillation
  • Abrasive

Safety

Boiling stones help reducing bumping during boiling, but do not eliminate it.

See also

References

Relevant Sciencemadness threads