Difference between revisions of "Hydrobromic acid"

From Sciencemadness Wiki
Jump to: navigation, search
(Preparation and purification)
Line 17: Line 17:
 
== Preparation and purification ==
 
== Preparation and purification ==
  
The main way of synthesizing hydrobromic acid is the reaction between alkali metal bromides and diluted sulfuric acid. Care must be taken not to use concentrated sulfuric acid or another oxidizing acid, because these acids oxidize bromide to elemental bromine. Even with this reaction, the resulting acid is brown, contaminated with a small amount of bromine.
+
The main way of synthesizing hydrobromic acid is the reaction between alkali metal bromides and diluted sulfuric acid. Care must be taken not to use concentrated sulfuric acid or another oxidizing acid, because these acids oxidize bromide to elemental bromine. Even with this reaction, the resulting acid may come out brown, contaminated with a small amount of bromine.
  
 
Anhydrous HBr can be purified by letting the gas through a solution of [[phenol]] in tetrachloromethane. Azeotropic hydrobromic acid cannot be purified this way.
 
Anhydrous HBr can be purified by letting the gas through a solution of [[phenol]] in tetrachloromethane. Azeotropic hydrobromic acid cannot be purified this way.
 +
 +
== Projects ==
 +
 +
* Make sulfuric acid from sulfur, using NurdRage's electrobromine process (the hydrobromic acid is not expended in this process and is fuly regenerated);
  
 
== Handling ==
 
== Handling ==

Revision as of 18:52, 8 August 2015

Hydrobromic acid is a solution of hydrogen bromide in water. It is normally a clear, colorless liquid, sometimes colored yellowish or brown by decomposition (oxidation by air) and release of elemental bromine, with a strong odor. It is one of the strongest mineral acids.

Properties

Physical properties

The physical properties of hydrobromic acid vary depending on its concentration. Azeotropic hydrobromic acid contains 48% HBr, has a density of 1,49 g/cm3, and boils at 124°C.

Chemical properties

Hydrobromic acid is a strong acid, with properties similar to hydrochloric acid. It's, however, a somewhat stronger reducing agent.

The main property of this acid and the reason why it's sought after is its ability to brominate compounds. It is used to obtain both inorganic and organic bromides.

Sources

Chemical reagent stores typically supply hydrobromic acid. It is not used in any household chemicals.

Preparation and purification

The main way of synthesizing hydrobromic acid is the reaction between alkali metal bromides and diluted sulfuric acid. Care must be taken not to use concentrated sulfuric acid or another oxidizing acid, because these acids oxidize bromide to elemental bromine. Even with this reaction, the resulting acid may come out brown, contaminated with a small amount of bromine.

Anhydrous HBr can be purified by letting the gas through a solution of phenol in tetrachloromethane. Azeotropic hydrobromic acid cannot be purified this way.

Projects

  • Make sulfuric acid from sulfur, using NurdRage's electrobromine process (the hydrobromic acid is not expended in this process and is fuly regenerated);

Handling

Safety

Hydrobromic acid is a strong and corrosive acid. Protective clothing and gear is recommended when handling it. Concentrated solutions fume with hydrogen bromide gas, which is an irritant to lungs.

The toxicity of hydrobromic acid is relatively low. Bromide poisoning is possible, but requires large doses of bromides taken by the organism.

Storage

Hydrobromic acid should be stored the same way as any other strong fuming acid: in a glass bottle, locked in a special acid cabinet.

Disposal

Hydrobromic acid should be neutralized before disposal. Any non-toxic base will do the trick.


References