Difference between revisions of "Tetrahydrofuran"

From Sciencemadness Wiki
Jump to: navigation, search
(Availability)
Line 21: Line 21:
 
THF is difficult to synthesize by the amateur chemist. Industrially is made via acid-catalyzed dehydration of 1,4-butanediol, the latter being classified as a controlled substance in certain countries and US states.
 
THF is difficult to synthesize by the amateur chemist. Industrially is made via acid-catalyzed dehydration of 1,4-butanediol, the latter being classified as a controlled substance in certain countries and US states.
  
One method discussed involves the cyclization of [[n-butanol]], via two ways: in [[benzene]] at 80°C or irradiated with UV light at room temperature, both in the presence of [[lead(IV) acetate]]. The lead(IV) acetate is reduced to [[lead(II) acetate]], so it needs to be replaced as well. Instead of Pb(OAc)<sub>4</sub>, a mixture of halogen (Br<sub>2</sub> or I<sub>2</sub>) and an oxide or salt of silver or mercury, such as [[silver acetate]] or [[mercuric oxide]] can also be used<ref>[https://books.google.ro/books?id=by05kNKm_xYC&pg=PA965&lpg=PA965&dq=J.+Am.+Chem.+Soc.+1964,+86,+1528;+Sneen;+Matheny&source=bl&ots=Dsk-PD0mHX&sig=91wlDqBCa_LDiGfiVmHEOvChd1s&hl=en&sa=X&ei=3OfEVMeTJbKQ7Qaj24CQCw&ved=0CCEQ6AEwAA#v=onepage&q=J.%20Am.%20Chem.%20Soc.%201964%2C%2086%2C%201528%3B%20Sneen%3B%20Matheny&f=false March's Advanced Organic Chemistry: Reactions, Mechanisms, and Structure By Michael B. Smith, Jerry March, p. 965-966]</ref>
+
One method discussed involves the cyclization of [[butanol|n-butanol]], via two ways: in [[benzene]] at 80°C or irradiated with UV light at room temperature, both in the presence of [[lead(IV) acetate]]. The lead(IV) acetate is reduced to [[lead(II) acetate]], so it needs to be replaced as well. Instead of Pb(OAc)<sub>4</sub>, a mixture of halogen (Br<sub>2</sub> or I<sub>2</sub>) and an oxide or salt of silver or mercury, such as [[silver acetate]] or [[mercuric oxide]] can also be used<ref>[https://books.google.ro/books?id=by05kNKm_xYC&pg=PA965&lpg=PA965&dq=J.+Am.+Chem.+Soc.+1964,+86,+1528;+Sneen;+Matheny&source=bl&ots=Dsk-PD0mHX&sig=91wlDqBCa_LDiGfiVmHEOvChd1s&hl=en&sa=X&ei=3OfEVMeTJbKQ7Qaj24CQCw&ved=0CCEQ6AEwAA#v=onepage&q=J.%20Am.%20Chem.%20Soc.%201964%2C%2086%2C%201528%3B%20Sneen%3B%20Matheny&f=false March's Advanced Organic Chemistry: Reactions, Mechanisms, and Structure; Michael B. Smith, Jerry March, p. 965-966]</ref>
  
 
Other methods involve catalytic hydrogenation of [[furan]] or conversion of pentose.
 
Other methods involve catalytic hydrogenation of [[furan]] or conversion of pentose.

Revision as of 17:06, 13 September 2015

Freshly distilled THF.

Tetrahydrofuran or simply THF is an organic compound used as a solvent in chemistry. It is a heterocyclic compound, specifically a cyclic ether, or furan, with the formula (CH2)4O.

Properties

Chemical

THF will dissolve most plastics. In the presence of strong acids, THF converts to a linear polymer called poly(tetramethylene ether) glycol (PTMEG), used in the production of Spandex.

n C4H8O → -(CH2CH2CH2CH2O)n-

THF can be produced by acid-catalyzed dehydration of 1,4-butanediol.

THF forms adduct complexes with lithium, magnesium, and boranes.[1]

Physical

THF is a clear, colorless, water-miscible polar organic liquid with low viscosity. Its odor is similar to acetone. THF has a melting point of −108.4 °C and boils at 66 °C. It has a density of 0.8892 g/cm3 at standard conditions.

Availability

THF is very hard to find, as most chemical suppliers will charge various hazard fees for it. In some countries it's a controlled substance because of its use in synthesizing GHB; for example, in Russia, it's a FSKN List IV chemical.

Certain PVC glues contain a mixture of THF and cyclohexanone. Distillation is required to extract the compound.

Preparation

THF is difficult to synthesize by the amateur chemist. Industrially is made via acid-catalyzed dehydration of 1,4-butanediol, the latter being classified as a controlled substance in certain countries and US states.

One method discussed involves the cyclization of n-butanol, via two ways: in benzene at 80°C or irradiated with UV light at room temperature, both in the presence of lead(IV) acetate. The lead(IV) acetate is reduced to lead(II) acetate, so it needs to be replaced as well. Instead of Pb(OAc)4, a mixture of halogen (Br2 or I2) and an oxide or salt of silver or mercury, such as silver acetate or mercuric oxide can also be used[2]

Other methods involve catalytic hydrogenation of furan or conversion of pentose.

Projects

  • Organometallic syntheses
  • Stabilizing chromium(II) and samarium(II) compounds
  • Organic extractions

Handling

Safety

THF is considered a relatively nontoxic solvent, with the median lethal dose close to that for acetone. However it is a strong irritant and penetrates the skin quickly, causing rapid dehydration. THF readily dissolves latex, so nitrile or neoprene gloves are required for handling the the solvent. It will also attack and soften most plastics.

Storage

Just like the other ethers, THF will form explosive peroxides when stored in air, so must never be distilled to dryness. Butylated hydroxytoluene (BHT) is usually added to limit the peroxide formation. Sodium hydroxide pellets are usually added to precipitate the resulting peroxides.

THF is hygroscopic, so it's recommended to be dried before use. Molecular sieves are good for drying, as well as distillation.

Disposal

THF can be safely burned, although this is not recommended if the solution is very old. THF must never be poured down the drain.

References

  1. http://en.wikipedia.org/wiki/Adduct
  2. March's Advanced Organic Chemistry: Reactions, Mechanisms, and Structure; Michael B. Smith, Jerry March, p. 965-966

Relevant Sciencemadness threads