| Search |
| [Next Page] |
Mercury in Canada
Mercury is about 200 dollars a pound in Canada |
1-3-2021 at 08:55
by: XeonTheMGPony |
My Chloral Hydrate Synth
Hello, after reading up on all the threads here, and online I finally did a run for chloral hydrate ... |
1-3-2021 at 08:35
by: XeonTheMGPony |
Making a lab stand/rack setup - what is a good design?
[rquote=655564&tid=157091&author=zed]Clamps are expensive, compared to the bargain prices, c ... |
27-2-2021 at 10:42
by: XeonTheMGPony |
Making a lab stand/rack setup - what is a good design?
I built mine from type L copper and made it very flexible for configuring for large set ups, still n ... |
27-2-2021 at 04:56
by: XeonTheMGPony |
Homemade Overhead Stirrer (with pics)
ya make the motor in its own sealed enclosure. |
14-2-2021 at 13:44
by: XeonTheMGPony |
Homemade Overhead Stirrer (with pics)
I would recommend for making set up more convenient to decouple the motor from the controller, this ... |
14-2-2021 at 08:44
by: XeonTheMGPony |
Improving chloroform yield with acid.
[rquote=654117&tid=156572&author=Fyndium]https://www.youtube.com/watch?v=heqMdYqqMGs
They ... |
13-2-2021 at 06:03
by: XeonTheMGPony |
chloral hydrate synthesis
I noticed that and used stronger amounts of bleach and vinegar, it is on the stirring plate and will ... |
11-2-2021 at 17:13
by: XeonTheMGPony |
ETN first attempt
Hope fully you read all the big threads to save time and help ensure a good clean pure product! |
30-1-2021 at 16:40
by: XeonTheMGPony |
ETN first attempt
Search the forum, do the math? |
29-1-2021 at 18:54
by: XeonTheMGPony |
lead azide trouble
I personally like the PVA for it's handling and keeping properties. my sample has held up for a a co ... |
1-11-2020 at 13:50
by: XeonTheMGPony |
Single displacement reaction for lead?
Crosman Lead pellets .22 cal I found to be pretty pure Lead.
I added these to concentrated vinega ... |
30-10-2020 at 05:58
by: XeonTheMGPony |
Detained at customs
eh it is luck of the draw, they will detain a random samples and hope to find some thing. |
27-10-2020 at 03:31
by: XeonTheMGPony |
lead azide trouble
coated lead azides seem to be less sensitive to flame, but when pressed and ignited detonate with ve ... |
19-10-2020 at 17:43
by: XeonTheMGPony |
For those distilling at home, how do you feed water into your condenser?
Not visible in the picture but the water goes out to a air over water heat exchanger with a couple c ... |
17-10-2020 at 04:40
by: XeonTheMGPony |
"Fixing" some sodium acetate after a poor dehydration attempt.
I gave a good write up on purification of it some where here. |
12-10-2020 at 17:05
by: XeonTheMGPony |
Mercury in Canada
that's how I got 4 pounds of it, lots and lots of asking, in the end cost me 20 bucks 
Harder o ... |
12-10-2020 at 13:05
by: XeonTheMGPony |
Rotary cane vacuum basics: use CaCl2 drying tube instead of cold trap
In refrigeration, for water contaminated systems it is recommended to preheat the pump and to use th ... |
9-8-2020 at 05:57
by: XeonTheMGPony |
Tour My Lab
it is for making chlorohydrate, for that you need strong stirring and cooling.
By aligning the bu ... |
29-7-2020 at 16:39
by: XeonTheMGPony |
best wire for an electric detonator
Steel wool is amazing very high resistance but hard to work.
30 to 40 gauge Ni chrome is my other ... |
27-7-2020 at 03:39
by: XeonTheMGPony |
Is Peroxide in Ethanol and issue for distillation?
they they add it to water. 2 drips of 35% H2O2 magically will turn water into a cure for every thing ... |
27-7-2020 at 03:31
by: XeonTheMGPony |
HotPlate Branding
[rquote=640728&tid=155794&author=Mateo_swe]Someone should do a nice writeup how to make a DI ... |
15-7-2020 at 05:09
by: XeonTheMGPony |
HotPlate Branding
As others said never go by temp, go by watts first and foremost and any thing below 500 is going to ... |
15-7-2020 at 03:43
by: XeonTheMGPony |
Azides
Having difficulties free basing my Hydrazene, When doing it as Chem player does, I end up with a goo ... |
5-7-2020 at 07:48
by: XeonTheMGPony |
how to distinguish a solution containing chloroform from one with dichloromethane?
I just distilled with a rectifying column with care full monitoring of heat, then from there I did p ... |
29-6-2020 at 04:12
by: XeonTheMGPony |
| [Next Page] |
