Search |
[Next Page] |
What is soldering iron tip refresher? [rquote=680332&tid=159225&author=Sulaiman]My google skills failed me!
I did not find an ms ... |
15-1-2023 at 01:40 by: Junk_Enginerd |
best route to WFNA Related to this, I have a question... If you have RFNA, but it's not maximum concentration, and you ... |
15-1-2023 at 01:32 by: Junk_Enginerd |
hho electrolysis plate configuration [rquote=680043&tid=159183&author=Mateo_swe]Junk_Enginerd, you said you used at maximum 1500W ... |
4-1-2023 at 06:41 by: Junk_Enginerd |
Is there a not too complex route to make benzyl alcohol from styrene? It sounds like an interesting synthesis to try out. Apparently styrene can be oxidized to benzyl alc ... |
4-1-2023 at 06:21 by: Junk_Enginerd |
Why can't I make soft clay by mixing with oil rather than water? Well I'll be damned. Laundry softener did it. Soft supple clay, using paraffin oil as base. I did NO ... |
2-1-2023 at 06:17 by: Junk_Enginerd |
Nitric acid skin burn Thought my thread might be mentioned. It took two or three months IIRC until it
was fully healed, ... |
2-1-2023 at 06:14 by: Junk_Enginerd |
hho electrolysis plate configuration [rquote=679965&tid=159183&author=Parakeet]Sorry if this question is off topic.
I have a so ... |
31-12-2022 at 05:14 by: Junk_Enginerd |
Tungsten trioxide My gut says it's not soluble in anything really, and wikipedia reinforces that by suggesting hydrofl ... |
31-12-2022 at 05:05 by: Junk_Enginerd |
hho electrolysis plate configuration Clever and simple design. One thing that stopped me from trying a separated output cell like this wa ... |
29-12-2022 at 13:01 by: Junk_Enginerd |
hho electrolysis plate configuration [rquote=679842&tid=159183&author=Parakeet]
Can I really use stainless steel as an anode? Do ... |
29-12-2022 at 09:36 by: Junk_Enginerd |
PbO2 purification Purify how? What is your goal? To have as pure PbO2 as possible, or do you actually mean that you wa ... |
29-12-2022 at 09:32 by: Junk_Enginerd |
hho electrolysis plate configuration How your plates should be configured is driven by the voltage of the power supply you're planning to ... |
27-12-2022 at 06:30 by: Junk_Enginerd |
Portable DC source for electric arc-Ruby synthesis by the Henry Moissan method [rquote=679724&tid=159170&author=blogfast25][rquote=679721&tid=159170&author=Junk_En ... |
26-12-2022 at 00:32 by: Junk_Enginerd |
Hacking a test tube I do this a bit for glasswork purposes. Scoring and breaking, or heating, is very unlikely to turn o ... |
23-12-2022 at 13:45 by: Junk_Enginerd |
Portable DC source for electric arc-Ruby synthesis by the Henry Moissan method I may be mostly useless in this forum, as a pretty poor chemist, but I'm at least a damn solid elect ... |
23-12-2022 at 13:26 by: Junk_Enginerd |
Why can't I make soft clay by mixing with oil rather than water? [rquote=679380&tid=159140&author=macckone]It is possible to modify clay with quaternary ammo ... |
23-12-2022 at 13:01 by: Junk_Enginerd |
Natural rubber latex chemistry in general I want to know more about natural rubber latex. I know so little that I'm not even sure what to spec ... |
23-12-2022 at 05:27 by: Junk_Enginerd |
Is induction heating still effective with molten copper ? Yes. Molten copper is *very* corrosive. That said, I know steel stands up to it at least for shorter ... |
16-12-2022 at 04:59 by: Junk_Enginerd |
Why can't I make soft clay by mixing with oil rather than water? Ah. It gets wet on a molecular level. Nothing water soluble needed, just easily transitioning betwee ... |
12-12-2022 at 09:07 by: Junk_Enginerd |
Why can't I make soft clay by mixing with oil rather than water? Ohhh okay. I thought clay was simply tiny particles of sand basically. That makes sense. But that so ... |
11-12-2022 at 21:33 by: Junk_Enginerd |
Why can't I make soft clay by mixing with oil rather than water? I don't quite understand the reason. Dry clay, mixed with water turns into moist and malleable clay. ... |
11-12-2022 at 12:49 by: Junk_Enginerd |
Sodium aluminate I would also appreciate learning more about this. I have the same experience with NaOH and aluminium ... |
11-12-2022 at 12:45 by: Junk_Enginerd |
Successful Chloroform Synthesis [rquote=677587&tid=158939&author=unionised]
I think you probably need to distil the product ... |
17-11-2022 at 08:30 by: Junk_Enginerd |
Is induction heating still effective with molten copper ? I've done a lot of tests and research on a hobby induction heater I'm building. The lower electrical ... |
17-11-2022 at 07:58 by: Junk_Enginerd |
Preparation of STABLE colloidal gold This makes me think of NileRed's video about preparing ferrofluid. That's also a case where the part ... |
17-11-2022 at 07:49 by: Junk_Enginerd |
[Next Page] |