| Search |
| [Next Page] |
Unconventional Hexamine Dinitrate - Will It Work?
It will not work in a way you said. You have to add some base otherwise you are not having free NH3. ... |
21-6-2013 at 02:14
by: Maniak |
Nitration of Tris????
You probably just forgot to append reference for this statement so I'll do that for who's interested ... |
18-5-2012 at 09:20
by: Maniak |
Best way for getting high density ?
I'm not sure if I understanded what you wanted to say, but detonation pressure calculated using deto ... |
10-5-2012 at 06:33
by: Maniak |
Best way for getting high density ?
Yeap, this works. It is desired to mix it by some wooden spatula while drying. For sure, you can add ... |
8-5-2012 at 09:53
by: Maniak |
Best way for getting high density ?
Sorry, but when I see these analytical articles... I think that it would be better if autors will th ... |
3-5-2012 at 23:03
by: Maniak |
Best way for getting high density ?
Thanks for the piece, it's interesting! But in 11.50 SBR section there is nothing about phthalates.. ... |
3-5-2012 at 06:33
by: Maniak |
Best way for getting high density ?
As it was said here, C4 can not be compared to Semtex in view of mechanical properties, because its ... |
2-5-2012 at 03:19
by: Maniak |
Best way for getting high density ?
Sure, binder needs right plasticizer. It depends on nature of polymer if it has double bonds or not, ... |
27-4-2012 at 13:16
by: Maniak |
Best way for getting high density ?
The reason why there is SB rubber and not PIB is very simple. When the manufacture was started in si ... |
27-4-2012 at 09:03
by: Maniak |
Ammonium nitrate to Nitramine?
Russians published quite easy synthesis of nitramide via hydrolysis of dinitrourea:
Preparation o ... |
16-2-2012 at 05:58
by: Maniak |
Blue color using copper II benzoate
This kind of pyrotechnics is not in my primary interest, but few years ago I made some copper benzoa ... |
26-1-2012 at 04:28
by: Maniak |
Oxygen Balance of Charcoal and Carbon Black?
Why you need oxygen balance of charcoal? Pyrotechnic mixtures are too complex to be designed via sim ... |
24-12-2011 at 15:48
by: Maniak |
Best way for getting high density ?
hissingnoise: the acid was checked using pycnometry, it was surely around 98% HNO3. Unfortunately, I ... |
17-10-2011 at 02:05
by: Maniak |
Best way for getting high density ?
Viscosity has much lower influence on VoD than density. Even mixtures of NM with TeNM have VoD below ... |
14-10-2011 at 15:36
by: Maniak |
Best way for getting high density ?
1.) using liquid mixture of sorbitol nitrates as a part of plasticizer is a bad idea because of stab ... |
11-10-2011 at 03:19
by: Maniak |
Checking purity of RDX
RDX prepared via procedures involving acetic anhydride may contain some partial acetoxy derivatives ... |
2-5-2011 at 11:21
by: Maniak |
JEM
Is there anybody who downloaded complete Journal of Energetic Materials which was available on infor ... |
20-2-2011 at 03:48
by: Maniak |
sheet explosive
I don't know any real sheet explosive with PIB binder, but check GB1082641 for some info |
25-1-2011 at 06:14
by: Maniak |
sheet explosive
As I wrote in my first reply in this topic, NC is compatible with phthalates. I tried diethyl and di ... |
20-1-2011 at 09:35
by: Maniak |
sheet explosive
Latex is also useful for rubbery flexible sheets, but if mixed using latex emulsion alone, sheets wi ... |
19-1-2011 at 06:53
by: Maniak |
sheet explosive
It is quite easy to find proper ratio of PETN/polystyrene/dibutyl phthalate at which sheets are flex ... |
18-1-2011 at 14:36
by: Maniak |
sheet explosive
DNA: this is not about nitrogen percentage. Nitrocellulose with 13%N is used for single base smokele ... |
18-1-2011 at 11:56
by: Maniak |
sheet explosive
You definitely don't need acetyl tributyl citrate for sheet explosive. It serves just as an inert pl ... |
18-1-2011 at 08:21
by: Maniak |
Rouge science
Good morning men, I'm pleased to see the roguesci rising and I'm sure I'm one of the million who are ... |
31-10-2010 at 00:44
by: Maniak |
simple HMX-synth without Ac2O
Seems good..
I've looked at the proceedings more closely and I found three articles by Simecek ... |
26-11-2005 at 16:36
by: Maniak |
| [Next Page] |
